#1631 This Resin Creation Is At A Whole New Level! 

As far as I’m concerned, you don’t need to apologize for the length of your videos. I’m here to learn and appreciate your sharing! People can FF if they’re short on time. Thank you!

Every time you try something new I think "damn that's more things I need to buy now" 😂😂

If you have any pipettes or syringes they work well for topping off the fluid (getting rid of the bubble). You DO need a small, teeny, tiny bubble to help the glitter move around, but the smaller the better 😊

Always there will be a bubble that’s just how it is. Helps the stuff inside to move around don’t ya think 🤷‍♀️ If you remember snow globes when we were kids they always had air in it.

Just FYI, your nail lamp has a 90 second low heat mode setting. This is what you want to use to prevent those heat spikes. It doesn’t just cure for 90 seconds. It gives the same cure as a 60 second cure, but does it at a little lower rate. Heat spikes, when doing nails, can be quite painful for some people, so that’s the purpose of this setting. I absolutely love this skull! Beautiful!

I’ve seen a lot of liquid glitter resin crafters who make resin shakers use baby oil :) not sure of that would be cheaper but it’s also an option. Resin shaker artists drill a tiny hole and use a little syringe bottle to add the oil. Then they seal the hole with UV resin :) Also I think the bubble inside is cute so I guess it’s all about preference :3

Very creative idea. ❤ I have a suggestion, I use a lot of uv resin, instead of putting the uv resin inside the mold to create a partition, between globe and skull mold, put the uv resin on the globe (before inserting it into the skull) in small layers building up a partition this way it won’t overheat and you can control the height of the partition of resin. Between the wall of the skull and globe. Hope that make sense.

I can’t tell you how happy I am to see a video from you doing this specific craft. I saw a snow globe skull recently and decided I have to try and make one. I know your method is going to bring about the best effect, based on your previous videos.

This was a great success in my opinion! I’ve decided I have to invest in a holographic sheet and some plastic globes so I can play around with this as well! 💜

I love that you teach something you have never do it inspired people like me to not be so afraid to try new tech and I love the fact your always so chipper. When I'm haven a bad I listen and watch your channel Bec you have such and up spirit love the snow globes

I LOVE watching your videos and i don't mind at all how long it takes . It is really interesting to watch and hear how you work things out when you are creating

That air bubble is EVERYTHING! ❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

Please, don’t apologize for taking the time to do show us a few different ways to do things in resin. It’s nice to see the learning curve at times, it’s actually encouraging. Thank you for all your beautiful content

This came out so cool!!! I love it! I hope you'll do more with other colors, maybe with spiders and black and orange glitter for Halloween? Or bats would be cool as well.

I have seen a few of your videos. I love how you are experimenting with what you're doing because it shows not only that I'm not the only one lol but also because what you create is unique to you and beautiful to you and I think that is so important. :)

I’m not a skull person however this piece of art is fantastic ! I love the snow globe & the colors. Don’t worry about long videos. Your explaining your thoughts out loud & as I said before I love you thinking outside of the box ! Fantastic work & Thank you for sharing

In spite ofnall the socalled mistakes you think you made this is the cutest globe I have ever seen. Beautiful job as far as I am concerned. Get er done!

I love your experimental videos! Don't worry about how long your videos are, we love them! ❤️

Please don’t change your method for shorter videos! I watch every minute! I’ve learned so much from watching and listening to your creative thought process. You are a delightful instructor! You bring light and joy to your work! Awesome piece and great job on this one! Great catch, byw 😂. Loved it!

My daughter was a skull person, and so is her oldest daughter. It is absolutely gorgeous.

Lol, good catch! This is so cute. I love the way he turned out. I imagine my brain is very similar to his. Sparkle plenty, lol. Take care, xoxoxoxo.

Ms Julie, you my dear are a ray of SUNSHINE and make me smile & laugh with you every time I watch your video!💕 You kept apologizing... no need! I was with you all the way! IDC how long your videos are! I enjoy every single minute of them! 🥰 This turned out amazing! I was crossing my fingers & toes plus praying to the resin Gods with you!🙏 It worked!!🤩 It is soo pretty! I love the Lrisy glitters so much that I order the big jars of them. lol Love the glitter you added!💫 This is INCREDIBLE!! Wonderful job Julie! 🤗 You have so much more patience and perseverance than I do!😂 Ty for sharing & ty for taking us on a little walk to the glitter drawer too! It was fun! 😊I Love this! It turned out awesome! ❤ I honestly DO love watching your videos, hearing you talk and explaining your thought process. You are such a breath of fresh air and do not realize how much you truly brighten up my days!🥰 You are too sweet and so cute! Don't ever change and don't ever apologize!💕 Ty for sharing this amazing creation with all of us!!💜 Cya in your next video! Till then, Take care!😘

I Like It!! You Could Do A Turtle Like That Too!!

You can also use a little bit of water with hair gel, instead of the glycerine. Cheaper and easier to adjust how thick you want the liquid. Because you can get the hair gel (large bottle) at the dollar store. I use it to make sensory bottles. Which is basically a glorified snow globe lol. And you can add trinkets too, beads, charms. Etc. which is why I suggest using the hair gel. So you know if it's strong enough to float the objects, not just the glitter. That suggestion said.... I LOVE how this turned out.

I love the skulls brains swirling around.

Wow Julie! I'm not usually a scull person, but this is amazing, so much effort and a beautiful creation. Such great information and inspiration 😍

All snow globes have a bubble, so there is movement. Georgous and take all the time you need.

That's stunning, Julie 🥰. Great job xx

I had an idea for the holographic sheet. After you cut out the shape to fit in the bottom, have a small hole so the funnel can fit in and pour last bit of resin into the hole using the funnel, to avoid any bubbles. Just a thought, not sure if it would work but maybe❓ You’re so creative with all your resin. I love it 🥰

I agree Julie, I think it turned out amazing as well. It was a real labour of love and you were justly rewarded. What an interesting project. 💀

I love it too. Kind of looks the purple bulb is his brain and when you shake it up, the brain starts moving around. Your videos are great so please don’t worry about them being too long. Great job!

That is a very cute Skull snow globe..I like the holographic colors..... Brilliant idea. I love Skull. Leave it out for Halloween. What about a Red rose in a snow globe for your next skull snow Globe? ❤️🤩

Such a fun and unique project. Another option for keeping the glitter moving is mineral oil. It is thick and remains clear.

It's absolutely fantastic and now my mind has exploded with need to do it myself!

I always love when you experiment! I love the OOPS just as much as the WOWS. I'm only 5 minutes in so far but, that glitter is so pretty.

I love it!!!!! It's funny cuz when the air bubble was there...I was like....awww i like the air bubble. lol

Love watching your videos even your first time doing new projects,no matter how long it takes

Just a little tip, I looked on Google. This is what came up. and you can adjust the ratio according to the size of container. I hated seeing you struggling: This is from Google: A good ratio is 1 cup of water, 3 teaspoons glycerin, and 3 teaspoons glitter. Glycerin can be substituted for olive oil, vegetable oil, or baby oil. Adding more oil will make the glitter fall slower. Tighten the lid on jar and glue shut. Hope this helps. I love this skull snow globe. Watching what you do helps and I learned a lot. And thank you for your videos I'm a fan, you are really fun to watch . 😊👍

Julie!!! You fell down the UV rabbit hole! Yay! 😊💕 That was all I used for the longest time, as I was terrified of epoxy (severe asthma), but you were very encouraging. I'm glad I got brave, got proper PPE, and tried high quality epoxies - I love epoxy work! *Julie:* "Let's stop fussing with these little bits!" *Also Julie:* Continues picking off the little bits... 😆❤ OOOOH, look at that! It turned out *SO COOL!!!!* 😍 It's GORGEOUS! That's insanely cool! Okay, you've converted me! Need to get a skull mold! 😁 Please, do NOT shorten your videos! I SO appreciate your step-by-step instructions. You're a natural teacher and high entertainment. 😊💕❤💕 ~~~ You won't generally damage your molds as the UV resin heats up, but it *could* happen with cheap molds, I suppose? Your instincts are correct: do it in layers. The mold might not warp, BUT a too-thick layer does curve upwards as it cures under the lights, bringing the mold with it! Don't ask me how I know this. 🙄 ~~~ You can fill that bottom cavity with UV resin. Shouldn't take much. 👍 This was SO much fun, Julie! Thank you so much! 💕😊❤

The skull mold is a fun one, I find! I made a skull with mica powder as well as some chunky glitter mixed into it. The deep pour resin I used took a couple days to harden, so by the time it hardened, the top of the skull, top of the eye sockets, and top of the nose all had chunky glitter on them. I thought it had a bit of a look like it had snow fall on it and those were the spots it collected because the chunky glitter was white/bluish. I never looked at it in the dark before I gifted it, but the chunky glitter was supposed to be glow in the dark.

That’s awesome!!!!! Your dragon is still my fav 😊

You can use clear school glue in the snow globe too! It's a lot cheaper and does the same thing, just make sure to mix it well!

Had to review this one as I’m making another skull. You are amazing.❤

The bubble in the globe is good to have as that is what helps promote movement of the liquid inside

It's so pretty & fascinating The holographics are amazing

Morning from America. I don't really care for skulls but I can't wait to see how this comes out.

happy women's day 2023 he best kind of protection that a woman needs is courage and the best armour is self confidence. I’m glad to see you have both of them. Happy Women’s Day to you!

I just LOVE watching you create. :)

OMG! My brother would love this. If I get daring enough. I might try it. Great Job❣

Our middle son loves skulls and I have this mold! I can’t wait to give this a go!! Thanks for sharing!!

This is my fave piece that I have seen so far❤❤❤

Ok, I'm finally commenting now, lol. I loved this video! I never get tired of 'lengthy' processes when it comes to experimenting/learning with resin. I think you have a great teaching style, and I enjoy learning from/with you. I'm in my sixties, and don't totally understand the obsession with skull resin pieces, but it's a real big thing here in Washington State, lol. Different types of resin skull pieces sell like hotcakes here, lol.

OMGOSH! This is so freakin awesome! I LOVE IT! Good catch when it released from the mold!😂😂

You did such an excellent job on that skull and make it purple the two things that are my favorite and I happened across your your channel and I really like you you're awesome I love the way you talk to us I love the way that you act you're so free with what you say and I watched another video of yours on another channel I think it was about the foil oh my gosh lady you are awesome thank you so much for showing us the things that you are trying out and knowing that you've never done them before makes me feel like I can do them to thank you thank you thank you and I love your skull I love it I love it I love it

Hi there. I've started playing with resin creations. I never thought of this, but I can picture it without the bubble, and full of different magnetic metal filings, and placed in a stand with a rotating magnet in the base or where ever the design suits, and watch the magnetic fields playing within the fluid.

OMGoosh Julie, you make such awesome pieces of art & this one is one of the best in my opinion. My daughter loves ❤️ anything skull related. You outdid yourself again 💕. Thank you so much for sharing your talents I love seeing your videos (w/no skipping ahead)😊💀💀💜

Please use mould release spray prior to pouring. It doesn't matter how nice your moulds are, it helps protect them over time.

I used my high powered LED nail lamp the first time I played with uv resin n it curled up on me 🫣. So I got out my older uv nail lamp. It might take longer but it didn't curl up. Slow n steady won the race that day lol

Skulls Are In?? I'm not crazy About Em'!! Turtle!!🐢

I really like the glitter globe. Please don’t worry about the bubble

I think the little bubble makes it an interesting piece! 😊

Beautiful in the sunshine.. Lol the skull has a brain.❤

I don’t think you should have to apologize for taking long. You’re doing the hard work of experimenting. And it is beautiful! I want you to know that even snow gloves that are button from the store have bubbles in them. So don’t beat yourself up about your little bubble.

Absolutely beautiful, well Done. DEAN.

I ❤ your work, my sister got me started. 😊

Nice Catch, Julie! haha. I'm not much of a skull person either, but this is fun and the colors are super vibrant! ♡

I wasn’t a big skull fan…until I watched you make this. It is GORGEOUS. Love love love it!

That was quite a journey. It turned out great!

It makes me think of a gumball machine and childhood. I love it!

Awesome work Julie! You’re great! 👏👏👏🌷

Oh I love love love this creation! I also love watching your long videos. Can't wait to see what you do next 😘🇦🇺

AMAZING ! So clever! Well done you!! Can’t wait to see the next project! X

Beautiful. Soapy water helps get pieces out easily as well. It doesn’t streak the piece like rubbing alcohol does. Silicone mold release has been a game changer for me as well.

Oh wow, wow, wow Julie! So STUNNING!!! Well done, it's gorgeous. You're so amazing and inspiring, love it!!! 💜

Beautiful!! I’ve made so many of these over the past year, but the darn bubble always drove me nuts! So I finally found a way to have zero bubbles…and now I’ve lost interest in making more 😂

This is amazing! The possibilities are endless using the glitter globe idea! I hope you do more. I’ve never done a snow globe or anything like this, but I do know you can use baby oil rather than water-glycerine…if you can handle the smell of baby oil. Other clear oils might be possible, too, but not entirely positive of that. Thank you for the video!

What a great idea! I'm going to try it now 😀

I actually have this mold and love this idea. Thank you Julie

I actually really like the way your skull turned out. I'll have to try the snow globe idea.

I think that's absolutely beautiful and with the piece missing down there underneath you could put LED lights in like that baby up that would be totally awesome that would be cute sitting on the end of a walking stick just saying it would be how beautiful I love it

Julie, this is cool! I want to see you do it again!

Way cool video! I love the Skull as a snow globe! Very quick reflexes BTW. Made me laugh with you.😊

Fantastic! I love it so much! Definately want to try different scenery styles! You did a really great job! Thank you!

Very cool, Julie. You are so clever ☺️

So coooooool! 💜💀💜 Happy WEEN 2023! 🎃👻😈☠👽👺🤡🤖😼🫶👁

love all your resin work everything you do is amazing but i miss you doing some acilic painting as your work in that tipe of craft was also beautiful hope one day we might see some more🙋‍♀

I watched the entire video!! Always curious and yes I always learn something! Very creative!! You can see the holographics through the teeth!

that looks awesome and yes purple is the best color!

I love it! Little tip with the uv resin. I feel like the lamp never fully cures it. I put them in the sunlight for a day.

Woohoo I made my first order.🎉😊

I love your learning curve!!!❤🌻😁 How amazing!!! Bubble even looks cool in it!!😃

Oooooo that’s very cool!!! Now I have to try it!!!! Thanks for the idea!!

CAME OUT BEAUTIFUL🤩

I really like watching you because you're genuinely having so much fun it it's like I'm working on the project with you! Plus you're a real artist and your stuff comes out great!

I actually liked the bigger bubble! It looked like a little alien creature swimming around 😋

I absolutely love this and I can't wait to give it a try! Thanks for being so thorough it's very helpful!

Absolutely brilliant video Julie in love with the skull ❤

Love this!!! And you’re right, it is art 💕🌷🌸

That came out beautifully!!

I love watching your videos, regardless of how long they are. As an alternative to the water/glycerin mix, you might want to try baby oil. It is a bit of a pain to work with (it gets everywhere), but the oil has a higher viscosity, so everything precipitates out and drops to the bottom until you shake it. OiI is also lighter than water, so the end result isn't as heavy 😂. I love the way yours came out 😊.