16kW edf 367km/h JETFAN-130 Odyssey 13kg weight to 18kg thrust 265A Graphene 16s 8Ah TOPRC Jet Sound

Подписаться 7 тыс.

Просмотров 21 тыс.

50% 1

Odyssey TOPRC Model 2,3m
bigplanes.nl
JETFAN-130 PRO
shop.ejets.at/OShop/ViewProdu...
Motor TFL-SSS 56104-700kv
shop.ejets.at/OShop/ViewProdu...
ESC Flier Model 300-400Amps 20s (max 400A)
pl.aliexpress.com/item/129056...
BEC HobbyWing 25A 18s
www.rcfox.de/HW30606000-Hobby...
batteries Graphene, 16s 8000mAh 65C, total battery weight ca 3200g.
www.kostkamodelcentrum.cz/obc...
Servos 21g 10.5kg KingMax KM1203MD run on 8.6V
www.kostkamodelcentrum.cz/obc...
Landing gear JP-Hobby ER120 for Sebart Avanti XS
www.turbines-rc.com/en/struts...
max power ca 265 Amps 16kW
open duct air intake,
exchaust nozzle dia. 114mm
Top speed level flihgt 300km/h, with little diving 367km/h (GPS-Logger 3 SM-Modellbau)
Takeoff weight 13kg
Stall speed ca 50km/h
Transmitter FrSky Horus X10 Express on Open TX firmware.
Receiver FrSky Archer SR10 PRO with stabilisation and full telemetry (amps, mAh, volts, temp, km/h)
AMP sensor in previous video (time 4:05 - 8:04):
• Follow-up Black Horse ...
#namaxa_media
#WojtekBrzozowski
#EDFjetRC

Наука

Опубликовано:

19 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@FandanGo66 2 года назад

fantastic, simply fantastic, you have proved that the complicated and very expensive gas turbine no longer makes sense

@djpj54321 2 года назад

Incredible! The power, the sound, the speed.... Who needs a turbine if you can achieve the same goosebumps with an EDF! Amazing project! 👍

@chrisv-l3835 Год назад

OMG that sounds incredible. Could not have imagined an EDF could sound like that.

@bumblebeehead1 2 года назад

Amazing. The speeds,the sounds. Fabulous.

@simonjandrell5897 2 года назад

thats one of the best sounding rc jets i have ever heard.. mind blowing

@luisdejesus2570 Год назад

The jet sounds is is more than perfect. Good Job.

@mudpuddle8805 2 месяца назад

That was the most impressive EDF jet that I have ever seen or heard. The sound is incredible!

@ramonmedina1974 8 месяцев назад

No one has so good sounding EDF like yours! Well done!

@print3dnyc838 2 года назад

Fantastic!!! Watched several of your videos and your passion and obviois skill is quite commendable! (subscribed!)

@AlvesJone 2 года назад

Oh god I love this set up and Jetfan too. Thanks for sharing.

@RcAndries 2 года назад

Oh man I want this sooo bad! Thanks for all the time you put in to find this setup!!

@EDFjetRC 2 года назад

Just get the Jetfan130, it is so nice and so strong :)

@RcAndries 2 года назад

@@EDFjetRC I would have never expected such performance on an EDF that big, love it!

@rcplanepirate 2 года назад

WOW Sounds amazing!

@nathannation 2 года назад

Another great video! Very nice!

@jinsvi 7 месяцев назад

The sound is amazing

@drrosemountain8328 2 года назад

Nice Plane, great Pilot, awesome Camera Operator!

@JoshuaHaghani94 2 года назад

Legend. Please keep posting! Watching from the USA. I have a 64mm only :(

@wtfmimshag 2 года назад

Absolutely insane.

@nighthawk0077 2 года назад

Top EDF, top setup!

@bobturner3388 Год назад

GORGEOUS!!! The sound is absolutely the closest thing to turbine sound out there!

@simonbonner5419 2 года назад

Super super nice !

@JustEnoughRC 2 года назад

Beautiful 😍

@ghoustanable 2 года назад

Just as I thought you had the best setup ever on this plane you just had to step your game up brilliant as usual just simply brilliant. By the way did you get me email regarding the 3D printed mesh you used on the Viper for the turbine sound?

@thiagobarreto 2 года назад

I want it too 😢

@majorhavoc 2 года назад

Very good job sir 👍

@chrisr4274 2 года назад

Very nice!!

2 года назад

I should say: that's insane!! Love it!! LOL

@ssssss-dl8by Год назад

It sounds like space ship :D really cool plane

@Optimiser113 Год назад

Sounds more like a jet than a jet!

@MrMAPECU 8 месяцев назад

Wow! Sounds and flys exactly like a turbine. Well done, demonstrates what you can do with electricity 😊

@iwontreplybacklol7481 4 месяца назад

You have been duped. They are using a high powered directional microphone that applies noises like ASMR. In real life, it doesn't sound anything like this.

@gr8motive 2 года назад

Holy crap 😲

@abhinandanmishra534 2 года назад

Awesome!!! Not expected this performance also Is the flier model ESC good or should I get any other ESC. I am gonna use a 150 a 8s version for hotliner pulling around 120 amps

@Frequency369 3 месяца назад

Wow 🤩 super sound and super fast and even more super is your way to do presentation nice and clean in English. I’m Dutch but it’s better to understand then the original English language haha 😜 About the sound of real petrol jets, it’s the impellers what caused the sound and not the burning chamber.

@edfhobbies556 Год назад

GREAT FLYING!! I love the way you fly close to the deck were contrast in speed can be seen. What is your efflux from this fan? It has to be sick ... I haven't seen many fans over 200 mph efflux from the fan installed with the thrust tube but to go 200 mph in the jet the efflux has to be around that number or even higher. Thx in advance

@jedrinck Год назад

Did you modify the intake to create a more jet like sound? There is hardly any motor noise audible, just a loud whoosh sound which is great. In my experience suboptimal intakes, especially cheater holes perpendicular to the direction of flight, sound great.

@deadstickduck2025 10 месяцев назад

Greetings Wohjek, I could use some guidance... Mine has the JF130pro/56104-650kv and can't settle on 16s3p13500 or 16s4p18000 Molicel P45B cells. I like lots of 67% @120A cruising and the 18000 would be @14kg and give 8-10min. Not sure 3p will stay cool enough even though the plane would be nice and lite.

@rlake349 2 года назад

That is impressive but that microphone on your camera is equally good.

@rcswissflyer9393 7 месяцев назад

What kind of linkage you use on ailerons and flaps servos to hide LDS? Like they use on gliders lately?

@michaelhannah5376 Год назад

Hi Can you share info on the Graphene battery’s you used.

@jelleeee19 Год назад

Hi, I'm planning on using a jetfan 130 pro in my odyssey jet. I'm curious to try out your self designed intake lip. Could you send me the files to 3D print this myself? Also, did you use filament or resin printer for this part? Thanks a lot! Looking forward to test out this setup!

@tomstark7916 2 года назад

with all Odyseey's on back order in the US what edf jet would you recommend that would like the odyseey?

@tomcallant2278 2 года назад

hi, my brother remi and me following you a lot, can i ask you a question about a edf fan in combination withe a plan? best regards, tom and remi the flying brothers belgium

@tamrynkucera5152 2 года назад

what are you using to read Mah off the pack ? my radio will only read the volts thank you

@anilherrmann1803 2 года назад

very impressec jet. you often talk about STL files. I imagan you also have a CAD file from your jetfan 130. could you share it to me?

@beniaminz Год назад

How fast will a smaller jet fly with this strong edf?

@lennartvanopbergen 2 года назад

Great setup! Any link to how you modified the FAS100S to sustain higher Amps? Watched a lot of your previous videos but wasn’t able to find how you did it.

@EDFjetRC 2 года назад

AMP sensor in previous video (time 4:05 - 8:04): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b1DZDM1ANkE.html

@deandagner 2 года назад

Absolutely amazing! I love it. It sounds sooooooo good. Are you using a sound module?

@EDFjetRC 2 года назад

No, just pure sound from EDF :)

@deandagner 2 года назад

@@EDFjetRC that is crazy!! It sounds so real.

@nighthawk0077 2 года назад

Wow, didnt realize it was open duct. With full sealed ducting 400km/h is possible from dive.

@Frequency369 3 месяца назад

It’s not possible to visit the site for the edf, this because it needs a login.

@beyondxtream4056 2 года назад

Those speeds and forces with 21gr/10,5kg servo's?? No blow-back or lack of holding power on ailerons/elevator?

@EDFjetRC 2 года назад

no :)

@wololo10 6 месяцев назад

The HET 800-73 cooked?

@anthonyarchuleta9783 Год назад

Directional mic really enhances the jet sound doesn't it! Wish we all could hear edf like this.

@MrNcharly 2 года назад

What's the New Price all inkl. for Rady to fly?

@nighthawk0077 2 года назад

Least most relevant question.

@Toth_Marton Год назад

lol

@EnginGumus25 2 месяца назад

Hello, first of all, I have a question: Is it possible to use the F 16 chassis instead of this chassis in this jet aircraft? Thank you.

@ninjor8415 3 месяца назад

@ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uY0LylNPQRg.htmlsi=e4XP-oC0ZNyLJQg7&t=554 He says in previous videos he show how to make it read more amps? Anyboyd know which video its in? I cant find it!?

@piotrburnus8794 Месяц назад

POLSKA GURRRRĄ🇵🇱

@apexaero Год назад

I got 212 mph out of a 70 mm on 6s 125a in 2013, home design scratch built balsa/glass/carbon

@iwontreplybacklol7481 Год назад

Video or i call bs

@andreaslangner6621 Год назад

Great Plane ,i think the effency isnt very good.My 90mm have 3.2 Kg of thrust at 108 Amps and 6s. A 130mm Fan must have a thrust between 20- 25 Kg of thrust at this power consumption.Try different EDF Motors and see what happen.I testet 5 Motors to find the optimal performance .

@edfhobbies556 Год назад

What's the efflux of your 90mm EDF? Thx in advance Efflux or exit air speed out of the thrust tube installed is a pivotal factor in jet performance,. To go over 200 mph hr the efflux of the EDF in the video most likely is over 300 mph. The static thrust of an EDF can be high and Efflux speed be low the model will go the speed of the low efflux but get there quicker.

@seany11244 Год назад

@@edfhobbies556 Looking for the answer to this question also.

@iwontreplybacklol7481 4 месяца назад

To those amazed by the sound, realize they are using a directional microphone that amplifies the quietest sounds making it much better than it actually is.

@wololo10 6 месяцев назад

Mas sand that lip come on