(1710) Review: MultiPick Bell Core Puller

Подписаться 592 тыс.

Просмотров 81 тыс.

50% 1

After a half dozen locksmiths told me about the Multipick Bell Core puller, I decided to review it in video number 1710. I was amazed at how easily it pulled cores from locks, allowing most opens in less than 2 minutes! Better yet, with NO damage to the door hardware or door. I'm giving this one away but will almost certainly buy another one for my own use!
Link: VIPER Screws:
shop.multipick.com/en/locksmi...
Link: Bell-Core Puller:
shop.multipick.com/en/locksmi...
Like this video? Subscribe here: ru-vid.com...
👇🏻Links👇🏻
⭐ Support LockLab on Patreon: www.patreon.com/bePatron?u=29...
⭐ Support LockLab through Paypal: www.paypal.me/LockTube
Visit the Tribe’s website at: www.LockLab.com
LockLab’s Modular Lock picking courses: www.lockpickshop.com/Bosnian-...
Looking for tools?
🔹 MultiPick Services - shop.multipick.com/
🔹 Sparrows Lock Picks - www.sparrowslockpicks.com
🔹 Lock Pick Shop - www.LockPickShop.com
🔹 UKBumpkeys - www.ukbumpkeys.com
🔹 LockPickWorld - www.lockpickworld.com
🔹 Brockhage - www.lockpicks.com/
🔹 SouthOrd - www.southord.com/?...
🔹 My vise is the Panavise model 350. - www.panavise.com
🎵 Music from Jukedeck - create your own tunes at jukedeck.com
Hashtags
#Bosnianbill #LockLab #LockPicking

Опубликовано:

22 май 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 340

@user-nf4hd8bq2y 4 года назад

Respect for the brave locks that gave their lives to entertain us today. F

@SanityDoesNotSell 4 года назад

That poor master lock. He didn't know why you were killing him with a drill when he's so easy to pick. His existence was pain, you did the right thing.

@odatas 4 года назад

"Now i can just open it with a screwdriver" Bill, you could have done that from the start.

@burkemyers8459 4 года назад

Wasn't that a drill resistant lock?

@SanityDoesNotSell 4 года назад

@@burkemyers8459 I'm sure the package said it was.

@burkemyers8459 4 года назад

@@SanityDoesNotSell isn't that so very typical of Master Lock, lol.

@Aliyah_666 2 года назад

@@burkemyers8459 ah yes "drill resistant"

@twjohnson1203 4 года назад

"I can hear those threads cutting..." No it's the lock screaming! No animals were injured in the making of this video. Locks on the other hand...

@RPRosen-ki2fk 4 года назад

Yes, but plenty of locks were ... INJURED.

@mrfrenzy. 4 года назад

Zieh-Fix have self-drilling screws for their bell puller tool. No drill bits needed. For large cores you can use one of the smaller screws first before inserting the largest one. Sidenote: these american locks seem to have cores made of cheese without any hardened anti-drill pins.

@nrowlett 4 года назад

There are times when crouching in front of your 40th lock to pick in a row, in a building where they've lost all the keys (or never had them). You have to get all the cores out to replace all the hardware anyway; but most of the lock cores are crapped out and gummed up... making picking more difficult than it should be. This might be a consideration for, "Let's pull out the big guns, and get this job done!". --- Wishing I had this a couple months ago. 👍 Nice review, saw the tool before, but then these screws were being featured. Nice to see they're actually tough enough to work! - Stay awesome!

@grumpygus81 4 года назад

Great, seriously in-depth review! That's a ridiculously effective tool to have around 😀👍

@j.a.4360 4 года назад

Bill, if the front of your drill ratchets when tightening the bit; ratchet it and then back off one click and it'll be in the locked position. Then your drill bit will not slip.

@SanityDoesNotSell 4 года назад

Big if true.

@no-expert 3 года назад

Can you explain that further? How does the clamping force increase when you go one click backwards? Is that a general mechanism that is integrated in all higher quality drills? I am interested...

@imthesquareroot6125 4 года назад

Honestly hands down the best destructive method I've ever seen. Especially if you are under the gun for time and have to get in fast. I can definitely see why this kit will be your best friend in an emergency situation.

@tranquilthecat3417 4 года назад

With the brass core, I was almost thinking the screw would expand the core so much it would seize. but damn! it pulled that core out like butter!

@hemmethemma8081 4 года назад

Amazing! Thanks for the review.

@27RacerX 4 года назад

Loved the video especially when you drilled right through the other side of the fab lock

@RWBHere 4 года назад

Nice for a professional locksmith or law enforcement officer who needs relatively quick entry, but it takes away all of the fun and skill of challenging, and beating a lock. Thanks Bill.

@KandSLocksmith 4 года назад

This tool caught my attention. I'm a tool freak, so to speak. My wife wants to know if I really need one... I'm thinking yes...

@cmoio1101 4 года назад

How I found this channel I have no idea, but been watching for a few years now I think. I just want to say ever video you put out is 🔥🔥🔥🔥

@pascalg9390 2 года назад

I sometimes use this tool with these screws of course that I bought from multipick and I do not regret it! just one thing i saw in your video which is very well done! with the screws it is not necessary to drill first because these screws are self-drilling.

@frankbiz 4 года назад

That was great watching. I was wondering if that would be successful on a high security lock like a Medeco or others with anti drill pins and plates? Great video 👍🏻

@jakejake708 4 года назад

Love the reviews 👍🏻

@steve90tdi 4 года назад

I guess that shows that having the right tool for the job is important. Made it look very easy

@buddycraigg 4 года назад

That was oddly satisfying to watch those cores come out so easily.

@smerg69 4 года назад

I'm guessing Bills naughty bucket is going to be getting low!

@twjohnson1203 4 года назад

Yes many delinquent locks will be presenting themselves for picking only after today!

@Westhelockpicker 4 года назад

I'm definitely getting one!

@Madlintelf 4 года назад

I bet you had a heck of a lot of fun just yanking out all those cores Bill, nice to see you knocking all those out in one video!

@DangerfieldChris 4 года назад

You seemed to enjoy doing this so much I can't but help think it was revenge for years of tricky locks.

@asvarien 4 года назад

Behold the awesome power of the inclined plane!

@XxShantilisxX 4 года назад

Man, that loose Chuck was driving me crazy 😅. You looked like you were having a blast. Awesome giveaway.

@jamiemoore2550 4 года назад

Great video mr.B i was babysitting my 5yr old niece while catching up on your vids after seeing this one she asked me if she could watch more because she wants to be like B.B...hello from Jamie,ellie from wales...

@MrV1NC3N7V3G4 4 года назад

I'd like to have seen you reuse those $1 screws! Also would have liked to see how well they work on a lock with anti-drill bars and/or spinners.

@cardiffpicker1 4 года назад

They are fine to be re used anti drill isnt really a problem.

@MrV1NC3N7V3G4 4 года назад

@@cardiffpicker1 I'm absolutely sure he could have reused the screws...I just would have liked to see how many uses he could have got from them. As far as the anti-drill goes though..."isn't really a problem" would not be how I describe my experience with them. It can be quite difficult to get the drill bit to bite on the core when it is engaging the spinner. Also, hardened steel anti-drill pins can ruin drill bits very quickly. It certainly would have not been the 1-2 second process we saw in the video.

@dawsy20069 4 года назад

Problem is if they fatigue and snap off in the lock there's no way you would be able to drill it out.

@cardiffpicker1 4 года назад

@@MrV1NC3N7V3G4 anti drill pins very rarely come into play with a small drill bit through the keyway,spinners are easily jammed so drilling can be done. I have some pull screws I have used well over 10 times,as long as you dont screww the head up they will last a while.

@MrV1NC3N7V3G4 4 года назад

@@cardiffpicker1 Yeah, the smaller bits might slip right between the anti-drill pins.

@jamesfair9751 4 года назад

Awww l would have loved to had that mindy lock it’s so beautiful and I’ve never seen one like it before.

@allenshepard7992 4 года назад

Wow. While I would not consider this "sport" it is amazing. Good to know there is a way to get the unwanted lock off - even if means wasting a good lock.

@wademiyataki9221 4 года назад

"That was the hard way to open a Master lock, Bill. What were you thinking." Love it!

@gdyln 4 года назад

Amazing how fast and quiet it is

@gottacos2455 3 года назад

This guy is awesome

@pepperpepperpepper 4 года назад

Now I feel like a fool watching a thousand lock picking videos! ;)

@asvarien 4 года назад

"No idea if this is gonna work"... it's a master lock, of course it's going to work.

@jamescooper2825 4 года назад

I'm surprised the masterlock didnt open when threatened

@JeffreyRosenthal1 4 года назад

That's really cool. Imagine the time I could save on jobs when picking isn't working. I may get one of those.

@jakemakesthings9955 4 года назад

You made the master lock more secure by pulling the core 😜 you can’t pick in that way

@KeeperofPeace2011 4 года назад

This tool is amazing, combined with a ratcheting wrench you could even work this in tighter spaces

@X2Brute 4 года назад

very impressive

@hateeternalmaver Год назад

Big Boy Stuff and what feels like Bill's new favorite toy at that time... ; D

@Thedoug369 4 года назад

Would have been a good time to get even with some of those naughty bucket locks!

@billhenderson731 4 года назад

That tool is now what all of us wants. What a great feeling, to destroy and give back the pain to those locks that have stumped us. 😁

@gavinbryant9699 4 года назад

I've got the wendt version of this kit it comes with a drill adaptor so you can drive the screws in without pre drilling

@CraigCanberra 4 года назад

But if we can drill into the lock wouldn't we just drill the shear line then turn the lock without the need for this tool?

@davidhoward2237 4 года назад

i though some put ball bearing so u cant drill or harden drill pins

@RWBHere 4 года назад

Not if there are anti-drill features in there.

@BuildUpAKingdom 4 года назад

This tool is making it easier and a lot cleaner than drilling the core. By drilling you can get chips stuck - then the lock won't turn at all.

@mikaluostarinen4858 4 года назад

There are drill bits which have hexagonal 1/4 in ends. They won't slip in the drill chuck, and can be put into a bit holder, too, for quick change between screwdriving bit and drill bit.

@Richard.212 4 года назад

Those cores come out like butter.

@dutch_blades 4 года назад

That's a great piece of kit for any locksmith and interesting to watch. I have to say it's painful to watch perfectly good locks being destroyed whilst I'm here debating whether or not to spend cash on more locks to pick :') There's quite a few in my pick drawer to choose from, but there's a lot of Euro cylinders that cost a pretty penny and US locks are hard to find around these parts.

@frankdoemen 4 года назад

Awesome

@jamesfair9751 4 года назад

Ya forget that wrench throw a Milwaukee high torque impact on there and watch that core come flying out I don’t care if it’s fit brass pins steel pins or even tungsten pins it’s coming out 😂

@curtisstewart2866 4 года назад

You need lock picks made of these screws type of steel. Great videos 👍🏼

@jamesfair9751 4 года назад

Bill you have a high dollar ratcheting locking chuck drill. Lock that chuck down and the bit won’t spin in the chuck like that. Turn the chuck until it ratchets down several clicks then turn one click backwards the chuck is now locked.

@iggymac3473 4 года назад

Nice show bill thanks

@aze2099 4 года назад

Will you be able to mount a new core inte hole or is it completely ruined? Also, do you think you would be able to reuse the screws?

@88wolffy 4 года назад

MultiPick could have made the face plates interface with the bell in a way to keep everything centered so you don’t have to fuss with ensuring everything is lined up.

@johndododoe1411 4 года назад

The screw is not always dead center in the core. Plate lines up with core, bell lines up with screw.

@inuGrant 4 года назад

as an electrician we used wall mollys that were rated at 30,000lbs of holding force per for fasteners at the plants we built the set skrew was a very similar color and design as yours

@marinemanagements 3 года назад

Hey Bill, Thanks for all of your great video tutorials. Can you tell me what size of drill were you pre-drilling those locks with ? Thanks

@coladict 4 года назад

When he got to the Mindy padlock, he's already just having fun destroying these.

@PDeRop 4 года назад

Such a nice looking lock that Mindy.. bit of a shame.. no mercy for the Master lock though :)

@KJohansson 4 года назад

@@PDeRop The Master was mandatory, would not have been a complete test without it, it sort of sets the standard (not)..

@JuiceThe511 4 года назад

With headphones on, the sound of Bill driving those torx screws in was giving me the willies.... Urgh! Lol

@johnkaylor5814 4 года назад

that things awesome

@MrPINKFL0YD 3 года назад

Nice! Emty naughty bucket!

@debbiemoorin1748 4 года назад

How good is the door locks after you use a tap con screw that can be purchased from home depot for 10 dollars for a hundred screws.

@benjamindickey4511 4 года назад

You can just tell he's having too much fun with this

@badtrip801 4 года назад

Those screws are masonry screws we use them to attach louvers to Bricks and other CMU type stuff

@mal13able 4 года назад

thatn tool although expensive is worth the money incase the lock cannot be elctric picked or snaked,but a drill and a dent puller works as well,but thanks as always for making great videos of products,Mal in Richmond,bc

@CaptainCrunk5 4 года назад

Hey Bill. Those screws I believe are the same as concrete screws. Probably cheaper than a buck a screw at hardware store. I think theyre called tapcon or something like that.

@geneard639 4 года назад

You had so much fun doing this, I bet your inner 6 year old demanded ice cream afterwards.

@cherrybacon9790 4 года назад

German Firefighter standard tool btw.

@odatas 4 года назад

Yeah. They are called "ZiehFix" which means "Pull Fast".

@lazyjackass77 4 года назад

That's a great way to quickly empty the naughty bucket hehe

@rayarsenault4774 4 года назад

would the tapcons work with the smooth action of the puller? slide hammers do put a lot of shock on the fastener.

@madbstard1 4 года назад

That was so cool to watch! And it looks really well made. Question - what was the big silver-ish key like tool that's supplied with the kit?

@julienlaufer1595 4 года назад

Me too?

@gabe7552 4 года назад

Hi bill, I was wondering, if you have to drill it anyway, do you think it’s often enough that pulling the core is either faster or necessary to open the lock as compared to just drilling the pins, sidebar, etc.

@hihu7200 4 года назад

Those pull screws could be really good for connecting a door frame or window frame to the studs in the wall.

@Ghandisgarage 4 года назад

I would think an impact driver with a torx bit and a 3/8"s adapter and 19mm socket you could pop cores in under 20 seconds. those screws have drill heads, so you should be able to drive them right in.

@kewltune4683 4 года назад

That’s some serious pullout game you got going on there.

@eak125 4 года назад

As long as he gets his bell-end lined up right...

@badtrip801 4 года назад

Hahaha

@juansimon5802 3 года назад

i still have a tool just like that i made 20 years ago. still works.lol

@chaz2785 4 года назад

I want those screws cause "none of them even bended" LMAO 😂😂😂

@TreyCook21 4 года назад

Company secret recipe

@Carpagram Год назад

I’ve had a few of these snap on me. Usually on a anti drill lock

@petervermeij8196 4 года назад

You don’t have to drill first. The screws can do that too. Look at the tip.

@falkmachtsachen 4 года назад

Yes, but some of the core crack and get jammed really hard, or the lock body also cracks.

@bosnianbill 3 года назад

I understand, but sometimes there isn't enough room in the lock body for the core to expand to fit the screw. If you try to do it anyway, either the screw breaks or the core is completely wedged into place and can't be extracted.

@MrOMGROFLMAO 3 года назад

Great video. This part still has me confused, the self-tapping screws should be drilling the same diameter hole your drill is, that is the purpose of those screws. I could see concerns about expanding the core if there was nowhere for the screw's shavings to go but it should easily fit into the keyway not occupied by the screw. Was the above comment made after testing self-tapping screws (like the Vipers) or just with trying regular screws (which totally makes sense for seizing the core due to expansion).

@WUTANG-CLAN 3 года назад

@@falkmachtsachen i like the sparrows sets.

@Jero... 3 года назад

@@bosnianbill used exactly this tool from mp 20 years ago and there are different type of screws because of different types and wides of keyways.. if you have a wide keyway, you take the bigger screw and for small keyways the smaller screw Mostly the screw will only break if its not exactly straight screwed in. greetings from germany. PS: You can also rip the entire eurocylinder in two pieces if you dont use the plate

@ratzikratzi 4 года назад

Policeman: Sir, what are you doing there with that battery powered impact driver? Thief: I'm just changing a tyre Sir. Policeman: On a locked bicycle?

@imthesquareroot6125 4 года назад

What do you mean? That's not suspicious at all. 😁

@UncleKennysPlace 4 года назад

At some point, a large enough hole will allow you to de-pin the lock and open it.

@Pyrolock 4 года назад

That is true, AND the core just spins and the lock automatically pops open!

@randyaivaz3356 2 года назад

Great Video, Great Puller, When will they make a Friggin Case for everything?, Another Company Does, like to get, but don't want to buy the other, just to get the Case? Appears Great Quality..The Strongest Metal Wins.

@randomperson7847 4 месяца назад

Bill, the puller looks to work amazingly. Have you heard of anoother tool that also lets you drill the core. HPC Cylinder Eater - The Professional Way to Drill (CE-6000). Just curious on your comments for both tools compared.

@dkamm65 4 года назад

You could have tried drilling the various screws into steel and wrenched on them with a torque meter to see what it really takes to break one of them.

@BryanTorok 4 года назад

What if the lock core has hardened anti-drill pins? Do you think you would still be able to drill enough of a hole to get the screw in? Also. the Multipick site says "No pre-drilling required! It screws into the cylinder efficiently, thanks to a newly-developed drill-bit-tip and the DELTA SEAL® anti-friction coating." It would be nice to see that demonstrated. Lastly, what about using the screws with a slide-hammer?

@miaudottk9080 4 года назад

You probably won't even feel these pins and you're right: There's no need to drill the hole before screwing the screw in. These screws he's screwing into the lock have a drill bit in front of the screw area, so he should simply screw the screws into the lock meow. :)

@miaudottk9080 4 года назад

@camjamsdad I highly doubt that it'll seize the core enough to prevent an extraction.

@paolafrege7766 4 года назад

Lock carnage !

@rudiorudis6414 4 года назад

10000% - Original 👍👍👍

@georgesulea 4 года назад

Really cool piece of hardware. Are the screws reuseable.

@deenunya7735 4 года назад

Bill, would it do the Euros that are Flush ir just recessed intobthe Handle Furniture?, ? Nice Vid , beats tge Drilling and clearingvtge pins outta the Way

@firesurfer 4 года назад

I'd like to see a disassembly of that core puller. Is it big enough for full size cores? (1 3/4'')

@tarehjernetarehjerne4082 4 года назад

I wonder if this would work on locks with steel pins such as assa twin locks. maybe try it on a twin combi?

@The_Hanter 4 года назад

Bill, there's absolutely no need to pre-drill hole fot the screw, you can screw it directly to the core with (in this case) torx bit attached to drill and believe me that screw will make it through like nothing. There's also no need to screw it in center of core.

@urf808 4 года назад

Mindy!!!!!!!!!!! Sad to see her go!!!

@haydnjenkins7607 4 года назад

Can you reuse the screws, and if you use some blutack to hold the plate in place. while setting up

@pagedeveloper 4 года назад

So when would you drill out the lock, compared to just picking it?

@pinpincool 4 года назад

hy Bill, can't you directly screw without drilling? When i look the tips of the screws, it seem that they are auto drill screws

@chyrt 4 года назад

Yes, that is why they have such specific sizes of screws.

@blarfroer8066 4 года назад

Those drill tips are meant for sheet metal and are an absolute nightmare without pre-drilling.

@stephentorrey8727 4 года назад

You said you were going to try a Medeco, I was excited to see it :(

@aaroncohen7550 4 года назад

Bill great video as always! Before you send the tool to the winner (which I'm hoping is me :-)). I'd be curious to see it on a lock with a more substantial base plate behind the core... Clearly it would be a sin to do it to a Kasp, but maybe an American?

@aaroncohen7550 4 года назад

@camjamsdad fair, I was trying to think of something that had better core retention than what Bill should but wasn't so expensive it would be sad to break... Thoughts?

@penfold7800 4 года назад

I'm curious; what happens to all the pins in the lock that normally stop the core turning. Why don't they prevent the core being pulled? ...and seeing how you're drilling down the keyway first to get the screw in, why don't you just drill all the pins out and turn the cylinder with a screwdriver? That's the way I first used to drill padlocks - not through the sheer-line, but through the middle of the keyway and then dump all the pins out. It was nice to see a demonstration of masterlock's inability to make an anti-drill plate.

@onlyKentrop 4 года назад

The pins are usually made of brass, which is comparatively soft anyway, but if you put it against a quite frankly horrific amount of torque (notice how much Bill has to turn the wrench to actually get the screw to back out), then it actually shears any pins that are blocking the normal shear line. Plus, that plate on the Master isn't an anti drill plate, it's a turn restrictor. Anti drill plates will be free spinning.