Muy buen video! Excelente ganzuado con trampas incluidas. Muy importante ver el funcionamiento y la composición de estas pequeñas obras de ingeniería. Igual de interesante disfrutar del ganzuado como del despiezado de este gran cilindro. Muy buen trabajo maestro! Un saludo. País Vasco.
Muchas gracias Rafael, me alegro de que te haya gustado, es un placer para mi saber que me siguen profesionales. Muchas gracias por ver y comentar, un saludo ;o)
Wow That put up a real fight. With its anti snap, trap pins and very rare key way, that looks like it would actually make a good lock for a door !! Great job as usual Carlos :)
Thanks Toni my friend, and thank you very much again for your work with the subtitles, is much appreciated buddy ;o)). Yeah, is a good lock for a door, when it is installed, it is difficult to know that there are trap pins, in addition they will delay the opening a lot and make the autoimpression and bumping ineffective. Thank you very much for watching and comment Tony, you know it´s much appreciated ;o))
Awesome lock and picking. It was funny to see the trap pins moving while you were picking. That was a very complex lock - very well done my friend. Such a lock requires a lot of skills and training.
Thank you very much Michael, my friend, it was a very fun learning process, I´m glad you like it buddy ;o)) I really enojoy this one, thanks for watching and comment my friend, you know it´s much appreciated ;o))
Very impressive picking! 👏👏 Great job picking the traps blind, excellent technique. 👍👍 An exasperating and exhausting pick for sure, and gutting too! 😊 Very well done. 🔒🔓👌
Thank you very much Paul buddy, your vid about the Avocet ATK was very useful for me to defeat this Federal ;o)) Yeah, this is the right word, the first time you get a full turn you finish eshausting LOL Thanks for watching and comment buddy, is much appreciated ;o))
Thank you very much Noctis, I had not seen this lock before it was sent to me by LN, I had seen in a supply store a federal dimple with magnetic pin like the one that also sent me (I have not been able to open it yet). Thanks for watching my friend ;o))
A ver cómo digo esto....very very good,vaya pedazo de trabajo,hasta el momento lo más impresionante que te he visto,y no ha sido poco,el montaje será chungo,para mí sería imposible vamos,un abrazo campeón.
Muchas gracias compañero, es más laborioso que difícil, aunque la primera vez que peleas con los pernos trampa son bastante desesperantes, pero es pillarle el punto. Muchas gracias por ver y comentar Rafa ;o)) un saludo ;o))
Thank you very much merlin, I´m glad you like it mate, it´s a very cool lock and the trap pins are very challenging ;o)) Thanks for watching and comment, is much appreciated ;o))
Thank you very much Frosty my friend, it´s a cool lock to pick, very fun to defeat, learn to pick the trap pins was very cool ;o)) Thanks for watching buddy ;o))
Thank you very much Bill, after practice with the trap pins it´s not a hard lock, the six lowers are very cool pins but that does not translate to the lock as a great difficulty of picking, in any case, it is a laborious opening ;o)) Thank you very much for watching and comment Bill, is much appreciated ;o))
Thank you very much Jon, more than hard is laborious, once you get used to the touch of the trap pins, the opening becomes only something laborious ;o)) Thank you very much for watching my friend ;o))
Hola amigo mío. No había visto esta apertura tuya. El cilindro es muy parecido al Kale kilit. Yo no pude montarlo después de ganzuárlo y desarmarlo. ¿Cómo le hiciste? Me llevas mucha ventaja, compañero. :)
Hola compañero, no he probado ningún Kale Kilit, pero sé que los hay con al menos un par de pernos spool trampa laterales, vi a un compañero ganzuar uno en una quedada hace un par de años. Pues ahora mismo no sabría decirte como monté este especificamente por que hace ya algún tiempo que lo hice, pero suelo utilizar las lainas (las láminas metálicas) para ir asegurando los contrapernos según los voy colocando. Coloco un perno con el seguidor, meto una laina que lo sujete, vuelvo hacia atrás el seguidor y dejo la laina adelantada sujetándolo, así uno a uno hasta llegar adelante. Hay veces que el embrague y la leva me dan más problemas que los pernos y contrapernos. Alguno de este tipo lo he dado por imposible y lo he dejado partido en dos. Sé que has subido un vídeo, espero tener tiempo pronto para echarle un vistazo, ando muy pillado estos días, un saludo ;o)))
Damn! I thought that would keep you busy for a lot longer than that, very, very impressive :-) EDIT: how long and frustrating was it to re-pin both sides?
haha, do not worry, it has had me busy for a good number of hours, to learn to pick the trap pins was exciting and exasperating at the same time LOL This is a very cool lock my friend, it's really worth it to spend time and face it. Thank you very much again for send it to me my friend, I really enjoy it ;o)) Not had time yet to try to pick the other Federal, hope to have time soon ;o)) The repinning is very laborious, but possible, it is necessary to use small followers introduced by the hollow of the cam and extracted later by the same hollow, in addition I use shim to go placing the trap pins. The assembly of one of the halves is much simpler, and although it is a collection lock, I would really like to share it with a colleague of the forum and I am thinking of dividing it in two. Thanks again for the cool lock my friend, pure fun!
Hi Robson! this is a nightmare to pick, but I saw people bypassing the side trap pins with a spinner, so... Thanks a lot for watching and comment mate ;O)
Hola Juan, poner un tensor largo te serviría para que los pernos trampa no se traben en el bocallave (lo hago yo en el minuto 10:40 dándole la vuelta al tensor) pero cuando de verdad se traban es cuando coinciden con los alojamientos de los pernos del rotor. Ahí pasan a funcionar como lo contrapernos, y tienes que presionar los pernos para llevar los contrapernos trampa a su sitio, igual que con los contrapernos convencionales. Gracias por ver y comentar ;o))
