No video :(

1783-NATR by Todd configuration

Подписаться 1 тыс.

Просмотров 28 тыс.

50% 1

Configuring 1783-NATR (Network Address Translation Router)
This will show how to configure the Rockwell Automation 1783-NATR from scratch.
The router is strictly for 1:1 routing.
Remember to put the address of this NATR into the Automation Device (like a CompactLogix) Gateway address. Therefore if the NATR has an IP address of 192.168.1.1 then you put that IP address into the Gateway field of the CompactLogix ethernet setup.
I made this for myself, so I won't be checking the comments very frequently. I hope you find this useful.
Go ahead and play this at 1.5X speed... I was talking a little deliberate.
Thanks!
Todd

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@andrewrobinson8109 8 лет назад

That bit at the end about putting the NATR address as the gateway helped. thanks.

@MrDarnitt 3 года назад

does this means, i has to put 192.168.1.1 into device gateway?

@jessem7966 6 месяцев назад

You assigned the NATR a public & private IP address, but the IP's that show up in linx are the ones you added in the Translation. If that's the case, then what's the purpose of having a private and public IP?

@vorapobautomation9760 11 месяцев назад

How to use 1783-NATR with SIemens PLC S7-1200,S7-1500 ?

@SquishyBrained 6 лет назад

Thank you for this video, it helped me a lot.

@venkatesh.r4392 6 лет назад

Most helpful video for configuring 1783-NATR :)

@darthenx2585 2 года назад

Am assuming you won't be able to see the device using Link Gateway?

@vantruongduong9593 5 лет назад

Hi...I have done configuration already. But I did not understand when you set the IP address for RS link classic. Dose it same IP with public IP port. I try to the same and do not same. But my computer did not connect to PLC. Please help

@MrDarnitt 3 года назад

it depends which port you are currently connecting your cable to....public port or private port.

@sagarsupekar473 6 лет назад

Its really usefull video thank you

@KarthikBenki 6 лет назад

PLEASE EXPLAIN HOW TO CONFIGURE 1783-ETAP

@nczskitso 5 лет назад

the etapis a bit easier. ETAP only uses dip switches.

@jameskevintingson8572 5 лет назад

can i ask why youre public ip adress for natr is 192.168.x.x instead of 10.10.x.x?

@karlkendall5750 5 лет назад

The public address can be anything that you want, 10.10.x.x is just an example. You pick the one that is best for your setup.

@jameskevintingson8572 5 лет назад

@@karlkendall5750 this is our set up, natr has a private address of 192.168.0.85, 10.104.43.217 public address, we cant communicate with the plc because we cannot assign a gateway address to plc. what can be another solution so we can communicate with the plc? thank you