1925 Sears Silvertone Neutrodyne Radio With Rola Recreator Horn Speaker

Подписаться 1,6 тыс.

50% 1

I bought this Sears Silvertone Neutrodyne radio several years ago but I was also looking for a Rola Recreator loud speaker. A friend of mine got one for me at the August 2022 ARCI Swap Meet.

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@michaelscottcutler3627 10 месяцев назад

Thanks. Great video. I have a 1924 FADA 192A I found in a demolition dumpster last New Year's Eve. It needs a horn speaker and full restoration.

@HD7100 10 месяцев назад

Do you plan to restore your FADA radio?

@michaelscottcutler3627 10 месяцев назад

@@HD7100 Yes. Wish I could post a picture of the FADA.

@bobmarker6812 Год назад

It sounds good as is and is well preserved.

@aceeagle57 2 месяца назад

i agree with your decision to not possibly damage the unit by taking it apart; it works quite impressively as is. What a beautiful example of a battery set.

@msource111 10 месяцев назад

I have a Rola Recreator that I fit a 3" quality speaker and a bluetooth mini receiver into. Sounds pretty good. The speaker cone has a knurled metal flange on the bottom, you unscrew the flange from the lower can that is attached to the base. You can only access the speaker by unscrewing that speaker flange. My retrofit has the 3" speaker in the can and the blutooth in the base.

@jims2222 Год назад

Very nice immaculate radio. Did you test or swap out the second audio tube? How did you confirm that the OT is open?

@HD7100 Год назад

I used an ohm meter when I first acquired the radio.

@HD7100 Год назад

Keep a lookout for some upcoming videos on this radio. I will show exactly how I checked it out to find that the second audio transformer is open

@HD7100 11 месяцев назад

Here is the video that explains how I diagnosed the 2nd audio transformer was bad. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FxlNNCKjijk.html

@umajunkcollector 2 года назад

i would guess that you simply unscrew the chassis from inside, and lift it out. I doubt that you will have to take any wood apart.

@HD7100 2 года назад

Hi Don. No it isn't built that way. All the internal components are attached to the front plate with screws. To take the chassis out intact you have to slide the entire face plate and attached components up and out of the box. You can't do that because the wood pieces are all glued in place.