1937 Lincoln Zephyr 🏜️ Ian Roussel Continues Install of Rear Leaf Spring Mounts 📐

Подписаться 129 тыс.

Просмотров 65 тыс.

50% 1

1937 Lincoln Zephyr 🏜️ Ian Roussel Continues Install of Rear Leaf Spring Mounts 📐
Ian Roussel continues the install to get this Zephyr on Planet Get Low. Ian has once again come up with some ingenious ways to install the rear mounts.
Ian Roussel wants this car very low, he arranges an approximately 10 inch static drop in the new suspension design.
The Backstory:
Desert friends turn Ian and Jamie on to a find of a lifetime, A 1937 Lincoln Zephyr. In the kustom community, friends are EVERYTHING, as is sharing finds and resources so that we all can carry on the tradition and legacy of kustom culture. The kustom family has come through once again, and Ian and Jamie found themselves deep in the desert at an estate sale that was only invite only. This car could have went to the highest bidder, but instead went to The Roussel's to take loving care of it. Tune in to see what Ian and Jamie's plans are for this beautiful and rare car. The car has no cancer, no collisions, and most of the exterior pieces are included.
Music:
slip.stream/tr...
IF YOU ENJOYED THIS CONTENT
🛸SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
Our Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
We also have an Amazon store for you to shop some of the basics we use at our desert ranch!
www.amazon.com...
Follow Ian and Jamie on Instagram👽👽
@Full_Custom_Ian
@Mrs_Roussel_
👩🏻‍🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻‍🎨Intro and Outro Animation Done By The One and Only
@corvette.mike on Instagram

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 304

@johnglasgow4176 6 месяцев назад

Working on that 1937 Zephyr sounds like you're playing music of the era big band that is nice progress thanks for the video

@fullcustomIan 6 месяцев назад

Thank you!

@duaneayers6117 6 месяцев назад

I really enjoy watching your videos. Both of you are doing an excellent job. Keep it up 👍

@daveboatman4024 6 месяцев назад

You can put a piece of sponge into the hole saw and soak it with cutting fluid so as you cut and compress the sponge it squeezes out the cutting fluid and helps cutting the metal and extends the holesaw life.

@BiggerThanFrogs 6 месяцев назад

Looking good. Love your music choices Jamie, always surprising. 😀

@KaycieCarryl22654 6 месяцев назад

Ahhh, very good. Another day in rehab for me, another Full Custom Ian adventure for you! I feel I privileged to watching ALL of these builds. It makes my boring day a little bit better-er. 😊

@fullcustomIan 6 месяцев назад

Glad you enjoyed it! Hope you are healing and feeling better!

@jefferynugent 6 месяцев назад

You never cease to Amaze me with your work. 😊

@georgemyers6518 6 месяцев назад

That’s the first time I’ve seen shackles used for lowering instead of lifting the back of a car. Only Ian can dream up that concept. Please keep the videos coming

@markmcintosh3255 6 месяцев назад

Isn't longer ubolts and rear-end blocks much easier

@vbealer32 6 месяцев назад

@@markmcintosh3255only if the rear end sits above the leaf springs.

@65cj55 6 месяцев назад

@@markmcintosh3255 Dodgy and illegal..

@paulsmith9341 6 месяцев назад

The boxing is the gusset for the standoffs. Improves lateral rigidity.

@debbiebermudez5890 6 месяцев назад

Mr. B. Here ! 🍸👀😎. A master craftsman at work ! 👍👏👍👏👍👏

@MichaelMitchell-vk9lk 6 месяцев назад

Another informative and fun video,thank you

@helenawhite-c7h 5 месяцев назад

Excellent over all .Best thing on You Tube .Ian's confident manner and style is a joyful example for everyone watching to try something a little beyond their comfort zone. His skill set is amazing and watching him create using bits and scraps shows, that he builds things and not buying bolt on gadgets ,to cover for no skill , .He has it all style ,skill ,teaching ability ,knowledge ,his own show and a pretty talented camera toting beautiful wife ,to top it all off .Oh yeah great hair too

@StevenWeinberg-t7x 6 месяцев назад

I myself would really like to see more of the little jewel build.

@fullcustomIan 6 месяцев назад

We will be getting back to Her...we look forward to completing it

@metalmaggot 6 месяцев назад

Looks great. It's worth mentioning that many applications mount the rear of the spring along with the shackle above chassis mounting point.

@mikehynes6632 6 месяцев назад

Ian has talent oozing from every pore!

@erictopasna5893 6 месяцев назад

So. Far project coming along just fine. Loving the rear spring mod. Awesome

@stevefamfive 6 месяцев назад

Just thinking Jamie’s upper body strength has increased substantially since their RU-vid venture began. She’s rock solid holding that camera support. Very impressive!

@fullcustomIan 6 месяцев назад

Thank you!

@40momba 6 месяцев назад

Hi Jamie & Ian! I am taking a break from work to enjoy your work. George The GlassMan

@devernebreed6486 6 месяцев назад

What a genius!

@chrismarr2663 6 месяцев назад

This Zephyr is shaping up to be cool AF!!!!!!

@AndreLuiz-gk1mf 5 месяцев назад

I was adapting to a tricycle axle exactly with iron sheets, I stopped to rest and thought I'm going to watch the line to motivate myself to continue and just like that, trial and error,. Can't stop 💪🏻

@carysteinbacher9796 6 месяцев назад

I love the music! Yes!

@scottgalyk8970 6 месяцев назад

Pretty and functional

@SirWilliamHorne 6 месяцев назад

Ian you a professional, I’m not surprised you hit the measurements on the money! It’s always a pleasure for me watching you work, sometimes I think what the heck is he doing? Then you explain and I’m like wow I never would’ve thought of that! That’s why you are the man! Jamie you’re doing great with the music addition for the era! Love watching you both doing what you do! Always makes my day, I look forward to every episode no matter what the car you’re doing that day!

@fullcustomIan 6 месяцев назад

Much appreciated!

@mikewilliams4297 6 месяцев назад

Jamie the music while Ian was cutting with his cutoff wheel made me start singing 🎼 It’s a beautiful day in the neighborhood a beautiful day for a neighbor wold you be mine could you my neighbor. Welcome to Ian and Jamie’s Neighborhood. 😂😂😂. Best wishes to you both really enjoy your content. 👍

@scottalpervitz1019 6 месяцев назад

Thanks for putting Shadow on. We miss Dude and Lil.

@scottkrolik4699 6 месяцев назад

Another great video. This one was fun to watch Ian is such a master of what he does. He has learned for so many years to have that knowledge. Thank you Ian& Jamie for another great video I look every day to see if there’s another video.

@jimtiddes4964 6 месяцев назад

Loving it it hopefully the new puppy will be next shopping instructor!!

@ZonDog 6 месяцев назад

Another great session with Ian and Jamie! 😎👍

@SteveYankovich 6 месяцев назад

Great suspension building video, very interesting and informative

@johnkranz4004 6 месяцев назад

Very interesting set up Ian and Great video Jamie and great scissors

@Wayne_987 6 месяцев назад

Really cool. Id love to see you build a 4 link with bags someday.

@howardnielsen6220 6 месяцев назад

Ian amazes himself love it. Such a fine craft man

@tomtruesdale6901 6 месяцев назад

That was some pretty cool 'shade tree' engineering but with very sound and logical thought going into it

@lowella598 6 месяцев назад

Most excellent. Love the way you work. thank you😎

@Bob0sModelFabWorx 6 месяцев назад

Those mounting tabs would use a gusset on the side to add support by putting a piece of metal at right angles to the two tabs and cross brace. Like a cross brace. A gusset.

@coreyseibert 6 месяцев назад

Those brackets look clean boxed in and side plates in 👍

@monkeyfoodgarden 6 месяцев назад

Thank y'all for sharing. Really enjoying the channel. Every time I watch though I think it's Mr Winfield watching y'all yelling at the phone going Mr. IAN YOUR DOING IT ALL WRONG 😂. Amazing work.

@aarwarkil 6 месяцев назад

DJ Jamie been fire lately 🔥

@65cj55 6 месяцев назад

She's pumping out the hits.

@fullcustomIan 6 месяцев назад

😂@@65cj55

@65cj55 6 месяцев назад

@@fullcustomIan Lol, DJ Jamie

@eziotaddeo1726 6 месяцев назад

Wow!! Ian, awesome, watched your door/window fab on vw update the other day. Just when things couldn't get better (this arvo) watchin' the gusset's on the zephyr. Wow masterclass (master fab), Jaimee, 'gusset's', works for me, great to hear you if only in the back round, you're turnin' out some gr8 vids. Pop your head round say g'day, love your work guys you are great!!! Ian heard Gene was pulling back and sellin' off some stuff .Thought oh! no end of an era. BUT I'm happy in the knowledge your doin' your thing and sharing it with us FANTASTIC, the art form is alive and well watched the ol' red build with ya mate Bill the other day, wow you do some magic cheers!!!

@johnnypetross7204 6 месяцев назад

Love the music

@Don14320 6 месяцев назад

You make it seem so simple, but it's anything but simple.

@steveallen5087 6 месяцев назад

A fine piece of art! Works for me.

@gregdavis1487 6 месяцев назад

I love watching you figure things out. i have commented before that watching you work is watching an artist create. yes, sometimes it can be visually less entertaining, but it is never boring.

@edfranklin2 6 месяцев назад

Music sounds like a 60’s sitcom. Where’s our TV Dad?

@shawnknudson4201 6 месяцев назад

Ian, I have enjoyed watching everything I can find about you for a few years. I love your casual approach to your work. The fact that your vision is laidback is my favorite part. Jammie, you add even more fun with your innocent questions and giggles. Thank you both for making a great channel.

@marcduthie4327 6 месяцев назад

Looking better all the time. Have a good week. Marc from Australia 🇦🇺

@richardwoolley7854 6 месяцев назад

Very nice!

@stevek1030 6 месяцев назад

Looking good

@markmilostan2493 6 месяцев назад

that was so cool watching you create the rear spring housings from your incredible imagination. I'm a wood crafter and watching you fabricate motivates me immensely.

@fullcustomIan 6 месяцев назад

That is really awesome! Glad you are here!

@justacoupleofkids320 6 месяцев назад

I would consider a gusset to be a part that is installed at a perpendicular to two other components to strengthen the overall assembly.

@edwardkisner3119 6 месяцев назад

Building beauty from bupkiss, another day in Ian's fabasy garage!

@koningbolo4700 6 месяцев назад

I think it would be extremely cool to stretch the Zephyr to get another row of seating out of it... Stretched and lowered... cool.

@cjnavyblue 6 месяцев назад

Ian you are a mad scientist of auto engineering with an awesome camera lady👍.

@ricardomunoz2739 6 месяцев назад

A little here a little there, gets us to where we need to be, great work on both your parts

@baileyrivers7771 6 месяцев назад

The good old wackomator comes in very handy for making the top plates fit correctly ,this is going to look so cool when its lowered with those fender skirts

@BrianSmart1959 6 месяцев назад

Funny. With the back end on the lift and the fender skirts on, it looks just like a Citroen 2CV.

@65cj55 6 месяцев назад

It really did.

@user-cg1ki9gt4p 6 месяцев назад

i thank you for bring me along. am love loving the old cartoon music. brings to mind the pink cat guy.

@user-lt9lo4nn4y 6 месяцев назад

Always interesting to watch. Ian makes it look easy.

@sharilyncoyle8272 6 месяцев назад

SOOOOO 🤩LOVE 😍 the way you explain how everything functions, and what you have to do to keep it functioning after you customize it!!!

@fullcustomIan 6 месяцев назад

I definitely have learned A TON about kustoms filming and editing! I had no idea before we started this channel together! We appreciate you! ~ Jamie

@ronbunker5778 6 месяцев назад

I really like how you reinforce everything for strength. Looks really good!

@roymazac2532 6 месяцев назад

Getting closer to 100k. Great job both of you. Thanks for sharing

@sethlaird4435 6 месяцев назад

That was really cool welding music, thanks for mixing it up!

@fullcustomIan 6 месяцев назад

Glad you liked it!

@frankennaro4572 6 месяцев назад

I like the way you put things together. I learn a lot by just listening and seeing how you do your stuff and I just think that what you do makes it easier to learn.

@The.Real.Timmii 6 месяцев назад

amazing work and video skills!😊

@fullcustomIan 6 месяцев назад

Thank you so much 😀

@PaulDunen 6 месяцев назад

LOVE the vids !thanks for sharing your time ian and jamie

@davidbarnes4900 6 месяцев назад

Those would be hangers a gusset would bridge and support the bracket. 😊

@kennyphillips8603 6 месяцев назад

I really like the. I it going to work? I don't know. I haven't done this before. Excellent fabrication.

@jerrybailey5797 6 месяцев назад

Good bit of belt a bracers onnthose rear shackle gusset hanger thingys Ian, with that extra strong cross member , everything is lookin mighty fine 👍 👌

@terryosz8458 6 месяцев назад

That's going to be cool and low nice job and stay safe out there great editing also

@jack002tuber 6 месяцев назад

Gussets: When you put the motor mounts in the Jeep, it had gussets. The parts that keep the main part stiff.

@angelgarcia4328 6 месяцев назад

THE CRUSHER !!!

@patrickscanlon1631 6 месяцев назад

As always making it look so easy

@Frankinsteinguitar 6 месяцев назад

I implore you to convert that four door into a fastback two door coupe……you'd slay it!

@Ian_Roussel 6 месяцев назад

nope

@65cj55 6 месяцев назад

Why does everyone want less doors ?

@Frankinsteinguitar 6 месяцев назад

Seriously, only two doors are real hot rods.@@65cj55

@bigjarn 6 месяцев назад

Yes, Stand, off not a gusset. A double cross triangle between the two standoffs would be a gusseted standoff.

@toddbritton3221 6 месяцев назад

Good stuff👍

@MLFranklin 6 месяцев назад

Another fabulous fabrication lesson.

@user-tx8xj9lv7w 6 месяцев назад

Jaime, I love the music and your commentary, Ian, you truly are a metal master…

@65bugnut 6 месяцев назад

You guys could start another RU-vid channel, "Ian's happy tails dog training". It would be a hit.

@michaelalferes7244 6 месяцев назад

I see the new shop inspector is getting acclimated! Carry on!

@KayakCampingOffGrid 6 месяцев назад

Another interesting and fun intro to metal fabrication... I was surprised to see how the hammer was used as a precision roll form. 😮 True mastery, done with such ease and skill! Nothing to it approach is so fascinating 😁

@DontCallMeGarage 6 месяцев назад

Gussets, sometimes known as gusset plates, are metal sheets of various thicknesses used for either joining two or more components together or strengthening joints. These components include beams, girders, truss members, chords, and columns...

@copperaudio9664 6 месяцев назад

A tab is a diet soda. A gusset plate is a plate for connecting beams and girders to columns. A gusset plate can be fastened to a permanent member either by bolts, rivets or welding or a combination of the three :)

@elsdp-4560 6 месяцев назад

Thank you for sharing.🛸👽👍

@sizzle073 6 месяцев назад

I feel you haven’t grasped the benefits of multiple magnets. Hobo freight has an assortment of them, and yea they are a pain to constantly blow off the metal shavings and dust. But hey, they sure do help when you only have two hands. Looks great!!

@donavonbaker5172 6 месяцев назад

Jamie some of the music is realy close to adams family. ❤ it

@consanna 6 месяцев назад

I love the variety from the show beetle, to Little Jewel, and now The Zephyr. I am hopping to see a V-12 installed.

@65cj55 6 месяцев назад

LS3.

@fullcustomIan 6 месяцев назад

We have some stuff up our sleeve 😎

@65cj55 6 месяцев назад

@@fullcustomIan 12 valve Cummins ?

@samuelnoller1565 6 месяцев назад

Flip those shackles and you can get another 3 or 4 inches lower. Simply mount the shackle pointing down. Pre-96 ford pickups were like this from the factory. Of course then the shackle pivots opposite and you may need a bit more room in the body.

@101scetch 6 месяцев назад

As with everything you do, I think you have got a couple of surprises up your sleeve for the Zephyr and I can’t wait to see what. I am really glad you now have your own RU-vid channel because when I first discovered you on, I think it was the history channel or discovery channel. You weren’t doing this kind of work. Don’t get me wrong, it was good, but I think having your own channel you’ve gotten better. More freedom to choose how you do things and what to do. Please keep up the great work that you do. I am learning so much from you and I think we all are. From all of us car guys on your channel. Blessings to you and Mrs Ian from England. Take care.

@fullcustomIan 6 месяцев назад

Thank you!

@101scetch 6 месяцев назад

@@fullcustomIan you are very welcome.

@martyb.1291 6 месяцев назад

10,140 views in 4hrs thanks for episode.👊👽👍

@SJR1PRODUCTIONS 6 месяцев назад

Ian, instead of cutting your front spring perch mount to clear the driveshaft might it better (and stronger) to salvage an old two piece driveshaft and mount the center support bearing to the front spring perch crossmember. you would have to use the rear section slip joint. This would allow the front piece of the shaft to be "fixed" and let the rear section telescope as the suspension travels. Of course you'd have to shorten each section to fit. Let me know what you think.

@65cj55 6 месяцев назад

Easier to just do the driveshaft loop, and a one piece shaft.

@SJR1PRODUCTIONS 6 месяцев назад

@@65cj55 True, I would then remove the fabbed crossmember and use heavy wall rectangle tubing with the loop integrated into it. Just my two cents😎

@jefflassegard573 6 месяцев назад

I know you just put all that work into shackles, but leaf spring sliders are a thing to help get the axle lower. Maybe not too big a gain, just a lot thought.

@robertbennett9243 6 месяцев назад

Looks like some good engineering there.

@michaelBrown-rf6xd 6 месяцев назад

The gusset-tab-standoffs have Zepher lines to them. Really cool to bad they are hidden.

@johnkinnane547 6 месяцев назад

G’day Ian and Jami I was wondering how you would tidy those hanger shackles up and it’s brilliant how the fender just hides it and how the diff will be lowered into those “ A “ frames great job it’s really interesting how you work it out with out any drawings. Take care kind regards John

@Ronaldo-i7n 6 месяцев назад

The welding tunes are cool.

@markrobertson9015 6 месяцев назад

A gusset is a support. The fabrication around the top of the shackle is a cap so as Ian left the angle on the end cap of the 2x2 tubing he created a gusset.to help support the structure. I see the training for shadow has begun it helps to have little treats while in training. Just saying. Take care guys.

@michaelalberson126 6 месяцев назад

You could also hang the rear shackles above their mounting points weather it be the frame or an extension running from the frame or between the frame. Some older model fords did a version of this and it would provide a way of making the rear lower.