1963 Fender Brownface Vibroverb Amp......Rare, Valuable, and Worth Every Dime !! 

Glad to hear it, O. Thanks :)

Definitely!! When I get a notification that UD has posted a new video, I know it’s gonna be a very good day!

@@Joe_Hunt_Music Glad to hear it, Joe. Hope you liked it :)

@@UncleDougevery video is a joy and I’m sure I speak for everyone else watching when I say that. The wealth of knowledge that you have shared and continue to share with all of us gearheads is more appreciated than you’ll ever know. Thank you my friend!

@@Joe_Hunt_Music Thanks so much for your very kind words, Joe. We really appreciate them.

Thanks so much, Butch. I'm glad you enjoyed the video :)

At least all the Fender (and other manufacturers') schematics can be found on line.

@@silasfatchett7380 Are they? Thank you, I will get some.

Thanks for sharing, Mr. P. We're glad you enjoyed the video.

good choice iv used a reissue vibrverb 2 of them a new one and a used one my second one howled needed to put new caps in and it was ok then play steel myselfhave used Twin reverb 2 of them

@@edwardkujawa Thank you kind Sir.

Thanks, Alexis. These long videos take forever to produce and to watch, but there is so much information to convey that they simply require an hour or more to do so. I'm glad you enjoy them.

@@UncleDoug on the georgia election interference case: if this legal tangle has anything to do with Obama's getting away with genocide, then i am not happy about it. i am not saying their conduct was exemplary, i just know that they are just people in context to a much more complicated world than the media has any ability to convey. and where OBVOUSLY Wisconsin suffers Horrendous Election Year swing state Influx up from chicago, Notably marked by sharp increases in traffic fatalities, violence, cases of frostbite, "overdose", and preliminary voting year pressure on residents to flee certain voting districts. ( all of which was dissipated into a frenzy of media convolution, leaving us now with only the definitive court actions against the georgia interference ) as i said, i am non-partisan issues based .... and The Issue is the swing state election year influx that comes pounding into wisconsin causing all manner of horrors. Could I Vote For That To Stop ??? and if i could, i know my concerns would only be disregarded by that greater problem at hand.....that's the problem, it always has been. i am quite familiar with the political dynamics in wisconsin. and it all has to do with one seemingly simple thing, and that is africa's ability to continuously pull illegally obtained shiploads of food out of the heartland, at rates that will soon have us all starving to death.

@@UncleDoug but don't talk to them about it, because they get information about the rest of us faster than we do about them, if at all.

I only feature "special" amps that most of us will not encounter, Book. I'm glad you enjoy it :)

@@UncleDoug it's really super cool. Just like your hot rod trucks 👍

@@book3100 Thanks, Book :)

You're welcome, Ferd. Glad it was enjoyable :)

Thanks for sharing, Cappy.

Thanks, RD. Will do :)

Agreed. Thanks for your input, KK.

Actually... its revered for it's rarity and mystique. It was NOT well engineered and that's why they only made a few. Back in its day. there were likely a bunch of ticked-off owners who where not impressed with their purchase and so Fender killed the product and reengineered it.

@@CKDz Thanks for your input, Chris.

Thanks, Dave. My feelings exactly :(

Agreed. This amp should be used regularly.

@@sgt.grinch3299 I hope so too, Sarge.

I'm thinking an Uncle Doug repair didn't take any value away from this app. It's a documented repair on RU-vid too. Value added Uncle Doug repair on his RU-vid channel.

@@renegade44040 Thanks, JJ :)

Ive got my coffee and egg sandwiches (with black pepper) for this video !!

My thoughts exactly, Sarge :)

Thanks, Rohan :)

Thanks twice, Paul.

We hope you enjoyed it, Frank :)

Thanks so much, Steven :)

Thanks so much, Craig. It's always good to hear from you. I'm glad there were some useful hints :)

You're quite welcome. We're so glad to hear that our videos are appreciated :)

You're welcome, Greg. Glad you enjoyed it.

Good observation, CA, and one I failed to mention in the video. Yes, time and again, tubes that test OK on an emission tester are not worth a darn in a functioning circuit.

Well there you go. I'm glad I read through the comments and picked up on this gem of information.

You are obviously a good pet owner :)

Thanks, B. By all means, give it a try.

Thanks, Colin :)

I'm glad you enjoyed it, Kim.

Thanks, Grax. The pleasure was ours :)

Thanks so much, Alex.

Thanks for watching, S01 :)

We're glad you enjoyed it, Roger :)

Thanks thrice, Andrew :)

Thanks so much, FB :)

Thanks, Jay :)

Thanks so much, Doc.

Thanks twice, Meik.

Good to hear, Thomas. Will do :)

Glad to hear it, JS . Thanks !!

You're welcome, TC :)

Glad you enjoyed it, Randy. It's always good to hear from you :)

Thanks for joining us, Greg :)

Thanks, James.

Likewise, ZN :)

Thanks so much, CM :)

You are quite welcome, JC. :) That's great to hear.

Your family will be in awe, Pieter :)

Thanks, Michael :)

That's great to hear, Erich. Will do.

Glad you like it, ST :)

Thanks so much, Victor :)

I'm glad to hear that, OG. Likewise :)

So am I, Chris. Thanks for your support.

You're welcome, Martin.

Thanks so much, 1967 :)

That's great to hear, R55 :)

Thanks so much, JL.

Thanks for joining us, Mark.

Thanks so much for your nice and interesting comments, Michael.

Thanks for watching :)

I agree, Ray. Thanks for your input.

Glad you enjoyed it, Jay. I am indeed fortunate to have my furry pals helping with the audio demos.

That's good to hear, Sam. Thanks !!

Wow, thanks, Greg :)

Glad to hear it, Sarge :)

Glad you enjoyed it, Stephen.

BTW,RUSTY APPROVED!

That's nice to hear, Curtis. Thanks.

Thanks, Michael.

I hope you enjoy it, SS.

That's good to hear, John. Thanks !!

Thanks, WT. So are we :)

Glad you liked it, Mohamed.

Thanks, MB :)

Thanks, AZ. I will let you know when the first expedition is ready to launch ;)

Thanks for the very nice comments, Strat.

Thanks, WH :)

Amen, Tom :)

Thanks, Marcel :)

Thanks twice, Alex :)

Thanks. We're glad, Buckeye.

Glad you enjoyed it :)

Thanks so much, William :)

Thanks, Dan.

You're welcome, Nino.

I agree, Choim. The reverb was spectacular.

You're welcome, Charles :)

Thanks, Ed. That's great to hear :)

Thanks so much, David :)

You're welcome, Brad. Glad you enjoyed it.

Thanks, Peter :)

Thanks for sharing his with us, Glenn. I too have enjoyed the music at that bar and was astounded by the sheer number of fabulous musicians in Nashville. We're glad to help any time we can :)

Thanks so much for the very nice comments, JJ. Part of why I chose the "Uncle" part of my name is to foster a feeling of family.....which I really enjoy.

Glad to hear it, Adrien.

Our goal exactly, DJ. Thanks !!

Thanks, Carl. Neither have I :)

You're welcome, Glen :)

Thanks so much, Sean :)

Thanks, John. Glad you liked it.

Glad you enjoyed it, MR.

It was indeed, 74C. I'm glad the videos are informative :)

Thanks, Douglas. Glad you enjoyed it :)

You're quite welcome, GAT. Glad to hear that you enjoy our furry family productions :) Thanks for your continued support of our channel.

Thanks for sharing, CP. Best of luck with your project.

You will knock them dead with that tidbit of Fender history, KW.

Thanks, William :)