1965 Datsun 320, Will It Run After 30 Years? | Turnin Rust 

Puddin isn't going to be happy when he sees he missed one in his backyard. Seems strange to not see you guys trying to free one up in from the start.

I remember these trucks when I was little in rural Kyoto. They were amazingly popular both on the farms and in the urban sections. There weren't "caps" or bungee cords" at that time so stake bodies or tarps were the big thing to contain the loads which is why they have those hooks around the bodies for easy use. In my childhood memories, I can see them piled high with all sorts of goods moving about. Because of Japan's tiny alleys, these were the "bigger" delivery vehicles of their day with the even smaller 3-wheel Bata bata taking up the slack. I wish you guys would use a muffin tin when you do this. You guys are always pulling these vehicles apart and putting things down all over and it drives me crazy.

Here I go again with a prayer request from my favorite prayer warriors. My sister, Kathy has blood cancer, and her treatments are no longer working. Please pray for her to be released from this fear, or for God to perform a miracle and to give her an extension of life. MamaCard thanks you for always being present with prayers.

Haven't seen those since I was little driving around here. It didn't seem like it was going to be too hard to make her a runner again guys. Very awesome work of the Lord there guys.

I had that same engine in a car. Small but mighty. That thing topped at 105 mph and easy to work on. That "old" looking box was the same style used up into the 70s.

That truck is extremely rare. It's definitely a collectors item. I hope that you do a full restoration on it.😊

Now someone can say, these JDM’s guys sure make a reliable vehicle. That’s ok I’ll say for ya’ll.. once again another great truck story! Thanks again TR… love it!!

Love the look of that truck.

Hello and Hey to All the Fine Folks in Texas from the state of Maine !!!

The Bush family have revived another one. which is always a pleasure to watch. Stay blessed guys.

Starting handle...welcome to the UK in the 50's and 60's!! Nice old truck. Great filming again Christian well done.👍

Haven’t seen this yet but what a beauty. I have to go to shop for few beers and then sit down for this.

Haa ..Fist thing I thought Puddin is having a fit seeing this truck. Rare rare rare ..Too cool.

Sensational! Loved this episode. Dad with the wire brush in the dizzy cap is gold. Takes me back to Morris Minor days.

Love watching you and your dad work together it's very special. Keep up the awesome work. Thanks guys.

Love when you get these old trucks running. God bless the entire Bush Family.

I'm very surprised that Puddin fab shop didn't pick this truck. He is King of Datsun

I Love off the wall stuff and you fellas found a gem here Thanks for the Awesome Show!!!!!

I Haven't Seen That Era Datsun Pickup Truck Ever Before Amazing U Lance & Ur Father Got It Running Again

It just wanted you to help it live again! Way to go.😁👍👍

I have been looking for you od those Datsun for years... can't wait to see the show.

Great to see family working with one another on progress and keeping another vehicle from the crusher ,❤LoveJim J&R mobile service and God Bless Y'all and your critters

You guys are amazing God has given you guys gift to fix things. God bless you guys and love you.

Just can't thank you and the family for All the joy and inspiration you all share with us. Keep it up and GOD Bless.

I've been a Datsun fan since the early 90s. I've had 3 zs, 3 510, a roadster, 620, 720, 200sx. I love the fact that they are popular again. Suck, squeeze, bang, and she'll blow! Get it cleaned up, repair the rust, put it on a more modern frame, drop it. Cool little shop truck. Datsun/Nissan knew exactly what they were doing.

Thanks for blessing us with another great video

Puddin is going to be jealous....😂

Thought this would be the best way to connect with the owner of this channel as there is a person unloading your old videos on there own page and getting subscribers with it. You guys do an amazing job and it's so nice to see god's work at it's finest bless you all and keep up the amazing work.

Turnin Rust was the very first channel I ever subscribed to. Loved the strong faith foundation your videos had from the beginning. I finally plucked up the courage to start my own channel...

Nice this one has vocals! 👀 il watch

Back in the early '70s my brother had a Datsun, it was an orange four-door little car. We lived about 50 miles from the beach and he was a surfer. There were lots of surfer guys in our neighborhood and I remember many days with six people in this car driving that distance to the beach. We didn't always have six people but that car drove for years and years and we drove back and forth to the beach more times than I can remember. I remember when he saw that he hated to see it go but he needed something bigger and it still drove just as good as the day he got it. Good old time :-)

This was awesome can't believe that carb just worked like that, the car just wanted to live and thanks to you it is going to, keep up the good work love from England x

Loved your video boys and another great production by Christen When fueling any Datsun pre 1990, never use any Ethanol petrol, as that destroys the fuel pump and carbi parts, found this out on my wifes 1975 Datsun 180B. Crank handles welcome to my world, Massey Ferguson 1958 petrol 35 and my 30hp 3 cylinder diesel chinese tractors. Keep up the good work and God bless

My Friend in High school, Tucson, 1977, had the same truck, red and all. We worked on it some and he kept it emmaculate. We did a lot of miles in it and lots of stories! I was so Happy to see you get this truck and get it running! The sound alone brough back many happy times. Oh, and the fender mirrors are the stock ones.

This is a neat old rare truck… My first brand new truck was a 1985 Nissan/Datsun and I thought it was a very good truck and loved it. I did have to get rid of it cuz I was saving up for a house. AnyWho, I like that you guys, get off the beaten path with what you fix up Chevys and Fords are great but stuff like this is the kind of thing you don’t see anymore keep up the good work!

What a cool-looking old truck.

Great video guys. Well done. Enjoyed watching. 👍🏼👍🏼

Had a 64 Datsun when I was a teenager, it had a 4 speed on the column. It was built like a tank.

Great job and another great video guys 👍👍

I love this little truck.

Excellent video Turnin Rust :) Wyatt :) , Lance :) , Christina :) I remember those trucks my one uncle drove them for years and fun small trucks work on !

@PuddinsFabShop What do you think about this little minitruck?

That crank is pretty cool

Thanks guys. Love the video. God is so good to us all. Keep'em coming

I look every day for a new video from yall. Love the content and the clean family team.

As always, ENJOYED!

Love this and like to hear them talking. I see the mute videos but not so great

What a great little truck!

It'll be neat to see what you guys do with this truck in the next episode!

This was awesome! I love the hand crank start👍👍👍

I don't recall ever seeing your Mamma! Would like to see and hear more from her. I bet she has some juicy stories to tell about y'all 😜 great truck! I haven't seen one of those in years!

For future reference, if it’s sparking at the coil , the points are working just fine , you can’t get one without the other 👍🏻

I had a Datsun 120y back in the 80s in England. Great little car with the tucked in wheels 😁

1965 when my dad was born. This video should be interesting, can't wait to watch!

This one was a awesome video!

Great video, guys.

Here some pointer to help you all in the future, when dealing with older ignition system. A: Those canister type ignition coils dont like being mounted on there side and will leak out all there oil, damaging coil in the end. B: Those type coil are marked for use with a resistor for the points ones or for use with electronic ignition where the resistor is not used. For the resitor type, a ballast resistor must be used to drop the voltage to prevent overheating the coil or putting undue arc across the points. When converting to electronic ignition, the ballast resistor gets removed from the loop to give full voltage to the coil. C: Its not good on the coil, for it to be making large arcs and puts extra stress on the coil. Its better to use a dwell meter, to check the points for function with the hole ignition system hooked up. Leaving the plugs resting on grounded metal is fine when not wanting to start the engine, since limits the distance the spark has to jump to ground. A fluke 78 or 88 is a example of a usefull meter that comes with the dwell option.

little paint and body work and she would be a super going to town rig. Nice job and loyal truck for sure.

Brings back memories of my first car a 1970 Datsun 510. I think the Datsun B210 had that little 1200 in it also. Good to see the old truck running and saved from the shredder.

I owned one of these probably late 70's, and probably paid a couple of hundred bucks for it at the time. Was just thinking that it's one I wish I still had. Fun little truck!

I remember a few of these trucks running around Canada..Just very basic dependable machines!..Way to go TR!

Thank y’all for more great content. God bless

Привет ребята. Наконец-то новое видео. Прекрасно сработано! Отлично! Продолжайте! Жду новые видео

Thanks for another , Brother !

I knew a Ol boy that had one of these waaayy back in the day, he drove the bag off of it too, he junked out of it and everything, something would break on it and he’d fix it and keep on going! Yeah the outside of the bed was about rusted off of his too! Oh yeah he pulled a little Ol trailer behind his too! Them old Datsuns, like the Toyota’s you couldn’t hardly beat them.

Nice Video . Thank you .

Good job yall keep up the good work.

My first car was a 1966 Datsun 1200 pickup. Easy to work on and very dependable. I got it when I was 16 and had it until I was 19. Great first car. It was 1972 when I got it.

Nice work! ❤️😎

Better watch out having that Datsun puddins fab shop would love to have that

Awesome little truck. I really like it

I've worked on Datsun and Nissan vehicles for years... Finding an old PL320 pickup that hasn't been completely devoured by the "tin worms" is highly unusual. And it appears that the windshield is near perfect too. Amazing find guys.

Great video guys

I'd like to see more on this old beaut!

Would of loved seeing you and dad both inside that truck, looked little tight in there. Neat little truck, great videos as always.

Glad i checked in. I didnt get a notification.

PD Blaster is made just 30 min from me. A buddy of my used to work there said he can get a can or two for free any time he wanted one. Love that stuff. saved me plenty of times.

Found yourself a very nice runner. Hope you can get the hydraulics fixed so you have both clutch and brakes. I remember them from my 2 years on Guam, fun little trucks

Sweet find

These were fantastically good trucks

Enjoy watching y’all videos.may God Bless this channel. WWG1WGA

what an awesome little truck.

Brave man using the hand crank!

You got a datson out of Oklahoma before the Datson king old puddin got it it lol

glad your talking on this on the last one i tried to watch no talk i found something else towatch puddens fab came threw

Lance what an awesome truck 🚚 beautiful. Thank you God Bless

OH, MY, GOODNESS! I LOVE IT! 😍🥰 Oh Please fix her back up again..

Great little truck

Thanks!

Nice job!!

I had a 1971 620. On a 30 mile commute, the slave cylinder failed. To get home, I killed the engine,, put it in first, then started the engine. That got me rolling, then I shifted without the clutch and came on home. Bought that little beauty in 1978 for $1200 and sold it in 1983 for $1200.

A very nice looking truck 👍👍

Sweet little truck.

I worked at a dealership in the 70s and we'd see one of these from time to time. For some reason most of the mechanical parts were available well into the 80s. Clutch master and slave cyls were a very common replacement item. Frozen wheel cyls were also a thing on just about every brake job.

These trucks have a great body style !

I had a 1964 Datsun 1200 when I lived in Ecuador in the 60s. It was just like that one but did not have a box on the back. It was integrated with the cab. It was a duplicate of a Fiat 1100, but it was reliable. It had four on the tree, but the shift patern was backwards. It was a nice little truck.

Now I know why American always make a big car. I could see Lance could barely move his body in the cab. Anyway, I'm happy to see that little old lady can run on her own power. Nice work guys. Love from Jakarta.

You can put several hundred thousand miles on those Datsun's from the 60's. Our neighbor in Colorado had one and it had well over 300,000 miles on it and ran very well.

The switching of petals reminded me of faculty member of my high school had a car that they used the clutch petal as the gas petal. I went to pull in into the garage to do an oil change and mashed the clutch petal and the brake petal at the same time. I banged into the door. The teacher was disabled and had to use her left foot on the gas (clutch petal). It was an automatic transmission, but when you see a clutch petal, you instinctively mash it to the floor. It had 2 gas petals and 1 brake petal.

My friend's family had one of these in the 70's. He joked that if you looked underside of the hood you would see the beer can labels. One winter we were out driving snd pulled up next to a full size chevy truck up to the doors in deep snow. We were driving on top of the snow without sinking.