1971 Torino GT - Gear Vendors overdrive -PART TWO- install video-wiring the unit- first drive

Подписаться 375

Просмотров 2,9 тыс.

50% 1

Part two of a two part video series that will take you through installing a Gear Vendors aftermarket under/overdrive onto a 1971 Ford Torino. Part two involves wiring up the gear vendors unit, trouble shooting a very surprising wiring defect that had the project stalled and finally a demonstration of the gear vendors unit in action!
Part One: • 1971 Torino GT - Gear ...
NOTE: I am not a professional auto mechanic nor am I associated with Gear Vendors, I am just a guy working on his car in his own garage. So, be advised!!!
This Torino is a 351 cleveland car with a c4 automatic transmission and a 9 inch rear-end w/3.50 gears
Bracket I used for indicator lamps:
www.amazon.com...
Bracket I used for autodrive switch:
www.amazon.com...

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@Nova.1971 Год назад

Good job on both parts....thanks for sharing!!!!

@mattsboatyard6891 Год назад

Thank you for watching, It was fun to make!

@tomahawkfabworks2021 24 дня назад

Hello Matt, Great video about the overdrive been thinking about getting one for my car on my channel. Like you, I only have about 300 subscribers. Looking forward to watching your other videos about boats.

@siliconvalleyengineer5875 Год назад

informative and interesting video, thank you sir

@mattsboatyard6891 5 месяцев назад

Thank you, I'm glad you enjoyed it!

@thejandolife Год назад

Don’t get me wrong, high performance modern cars/trucks make more horsepower than the old iron. The thing that really keeps the muscle car era stuff from competing is being saddled with 3 forward gears in the case of an automatic transmission (4 in a stick application). New cars and trucks have 6-10 forward gears=always in the power curve. That Cleveland big port should be lots of fun with what amounts to a 6 speed . Worth every penny for what you pick up . Great video. Very informative.

@mattsboatyard6891 Год назад

It really makes the car a lot more flexible. The gear splitting is super cool, it now has a true passing gear in 2nd gear w/overdrive. The gear shifts are all close ratio too. Thank you!

@rogerkint9354 3 месяца назад

I know this is old and you may not see it but I’ll ask anyway. Did the driveshaft angle change with the shorter driveshaft? And if so how did you adjust it back into correct geometry? Thanks

@mattsboatyard6891 3 месяца назад

It did change the angle very slightly but it actually made the angle even more neutral than it was before. Thats a nice thing about installing one of these in a car with just one single driveshaft. If you install a Gear Vendors into a truck, driveshaft angle issues are more likely, especially if there are multiple driveshafts in the driveline to begin with.

@musclebone7875 Год назад

I love my th400 gear vendors overdrive

@mattsboatyard6891 Год назад

It is a great addition!

@stephenholland5930 Год назад

How did you know your engine RPM without a tach fitted? Are you going to try to find a factory type tach and install it where that blanking plate currently is? Hope you can repeat your MPG test to see an improvement. Interesting video.

@mattsboatyard6891 Год назад

There are calculators that can calculate your RPM's for a given road speed- they are not perfect but they'll give you an idea within a 100 RPMs or so. I used to run a tach in the car, but after doing a refresh on the interior a few years back, I took the after market gauges out of it- I would love to find an OEM Ford ribbon tach for the blank spot in the cluster. Adding the Gear Vendors definitely has bumped up the MPG's as well as making the car a lot more flexible.

@G_Machine_Joe Год назад

Followed your install...because YT analytics brought me here. 😊 And because I'm thinking of doing the same upgrade. You did everything right with your install. Everyone assumes the vendor sold us a functioning unit. The days of quality control are long gone. Good catch on the swapped wires.

@mattsboatyard6891 Год назад

Yeah, that was a frustrating situation- really had me going in circles. I don’t know the manufacturing process on the controller- it’s a Holley MSD product- but if the connector is put on my hand I could imagine someone flipping the blue wire with the blue/white stripe wire. The white stripe(on the blue/white stripe wire) on the controller was very faded! So the stripe was difficult to see w/o really staring at it.

@AnthonyMarcotullio Год назад

I have the same issue with the red light coming on..How did you fix the 2 blue wires that were crossed? Did you re pin it or just swap the wires to be connected at the proper connections

@mattsboatyard6891 Год назад

Once confirming that the wires were crossed on the module, I swapped the blue/blue-white wires on the wiring harness. i'm sure it could be re-pinned too!

@mattsboatyard6891 Год назад

Is your blue and blue/white wire switched on your module too? IF so, i'd be curious to know.

@AnthonyMarcotullio Год назад

@@mattsboatyard6891 Exact same issue as yours....Probably from the same build lot

@bbgcars Год назад

Nice to see you post again!

@mattsboatyard6891 Год назад

Hey, thanks!

@AnthonyMarcotullio Год назад

Another question for you that you might be able to help me with. My Hall effect speedo sensor has three wires( Red Black and White) Would you think that the white would go seperately to my white signal wire from the speedo and the purple and green go to the remaining black and red?

@mattsboatyard6891 Год назад

Well the black and red wires go to the solenoid. .. The speed sensor that came in my kit just had 2 wires(green/purple). What vehicle are you putting your gear vendors onto?

@sumthinsumthingarage7913 Год назад

I may add one to my Gold and White 72.

@mattsboatyard6891 Год назад

Its an extremely cool addition! In the case of my car, it's made it something you can take out on the highway and not have the motor howling just to keep up with traffic. What rear gears you got in your Gold/White 72?

@sumthinsumthingarage7913 Год назад

@@mattsboatyard6891 3.50. But with an OD I could put 4.10’s in it.

@mattsboatyard6891 Год назад

Yeah, you could! It would be a kick ass addition for your 72. The gear vendors allows you to gear split too.