1972 AMC Javelin's First 1/4 Mile Pass Ever! What will it run after sitting for 40 YEARS?

Подписаться 43 тыс.

Просмотров 76 тыс.

50% 1

We finally try to take our AMC Javelin project racing, for the first time ever, at the Kenosha, Wisconsin AMC Party. Did it finally get finished? Did the motor, that hasn't ran in almost 30 years, actually start? Did the car, that was started almost 40 years ago and never completed, finally get done? Can it really be finished in a two week thrash? Follow along as we add another chapter to the story of Rob Wess, John Dover and Tony Mancusi...helping them see their dream become a reality.
#AMX #amcjavelin #americanmotorscorporation #AMC #javelin #americanmotors
Please Like, Subscribe and Comment and thanks for watching!
A huge thank you to Keith for all of his help, we couldn't have done this without his help. Check him out at / muletown.mob. .
to see what shows he's planning to be at near you!
For more frequent content from Sally’s Speed Shop, follow me on Instagram @JacobRossDavis - / jacobrossdavis
And, if you want to send of any cool stuff for us to unbox and use on the channel, you can send it to the address below!
Sally’s Speed Shop
P.O.Box 72225
Newnan, GA 30271

Авто/Мото

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 218

@berniecanute8568 Год назад

Been a while that I haven't run my '68 401-powered 4-speed REAL STREET (300,000+ miles!) Javelin at the local (Napierville, Quebec) track. What I wouldn't give to be a part of not only drag racing out there, but to do it with a whole bunch of other AMCs!!! So very cool, guys. Keep it up.

@ericdanielson1138 Год назад

It brings back so many memories of the Pro Street days of the 80s and early 90s. Love it. Now onto some suspension work.

@truckerkevthepaidtourist Год назад

That was neat to see it come back home to Union Grove right down the road from Kenosha where the AMC factory was 👍🏻🤠

@markallen1413 Год назад

Man...guys that was awesome, I've been tuned in on the entire series. My uncle bought a 74 Javlin brand new and as a kid I loved it but that one you guys is bad ass and like you said people wait there whole life including myself to go that quick and you did it out of the gate....i love AMC because they are part of the Mopar or no car family 👍👍👍👍👍✅✅✅✅✅

@longroth4882 Год назад

I spent every weekend at Great Lakes for many many years, that's where I cut my teeth. And I'm a big AMC guy... Was waiting to see you get that thing out. You did good, but since you've never dealt with it before, you don't have to stay on the trans brake long with an NA setup, you'll be at launch rpm in under a second. The longer you're on it, the hotter your trans temp will get. Turbo guys stay on it longer, but they have to build boost, and any will tell you how hard it is on the transmission, if you're on it too long your fluid will cook. Once you get the timing on the trans brake good so you're not on it any longer than you need to be, and fix the four link, I'd bump the launch up in the 3,200-3,500 range to get started on finding where the car likes it, that combo should take it like nothing. That is one sweet car...

@miketuttle5926 Год назад

Great first pass!

@marktimmons6149 Год назад

Great video Jacob awesome run getting a ten out of it.

@keithscudder7136 11 месяцев назад

Before you race, have the engine off as much as possible, heat hurts the engine's performance. Great video. From one fellow racer to another, I hope you reach your goal !

@thomaskerr2082 Год назад

Thanks for sharing this with us. Very impressive to say the least. Fix all the things you have listed and hope to see you make that 9 second pass. TK.

@race-all Год назад

Great car good job.

@karlsracing8422 Год назад

Holy crap I was there! In the Black 74 Duster.

@OldTimeRevival Год назад

Cool! It was an awesome event!

@draggonhedd Год назад

NH also has weekly drag snowmobile nights at NH dragway. Its sick.

@brokenbackunlimited2187 Год назад

Very cool for it's first run. It did spectacular.👍

@billsalzman Год назад

Wow, Jacob, what a great video!!! 👍GO Team Sally

@hetzlerracing5490 Год назад

That's a cool car.

@danielhackleman2140 Год назад

Wow what a great video. More than great !!

@troyshorebuiltit Год назад

Congrats on making it to the track and running her it's been a long time coming great job on the second. Pass reaction there bud😂

@stuntgirl56-therachelvande24 Год назад

It is nice that they did not give him a speed limit, let's see what the monster will do..

@garyeverettlynne9437 Год назад

I have been waiting for this video for a while. I’m excited to see what the car will do in the quarter mile.

@SallysSpeedShop Год назад

Took me a minute to get this one all the way together. It was awesome getting to take this car for its first quarter mile rips!

@harrywalker968 Год назад

@@SallysSpeedShop mate here in aus, ran a te cortina, 6 cyl, on lpg, 10 secs.. back in the 90,s. all the v8 guys thought it had a v8 in it.. not happy.. a 6 has more torque than a v8.. 4.1 ci..iron block 70,s, ba alloy swerl head.. 4bbl..this is when lpg was about 50c lt.. i have a dodge chall. 340 r/t . amc / amx, would love one..

@harrywalker968 Год назад

@@SallysSpeedShop id leave it in drive just adjust the valve body to peak 5k.

@danwilliams8771 Год назад

Sounds wicked

@jimburgess9205 Год назад

That car needs a blower. An absolute beast. Love it!

@1954shadow Год назад

If you star racing snow machines … “Sally’s Ski Shop.”

@mudcat1622 Год назад

Awesome job and beautiful car. Only thing I'd do different is I'd change out the shifter.

@truthofgod6213 10 месяцев назад

Yes, it need an air shifter so both hands stay on the steering wheel.

@thomas3059 Год назад

It's pretty awesome to do a 10.08 First time down the track

@billsalzman Год назад

Ahhhhhh 1st dad joke.... rented a charger!!! 😂😂

@ianlegrand3450 Год назад

🤜💥🖐️🤘nice

@jester-gq9jq Год назад

👍👍👍👍👍👍

@klh471 Год назад

3500 ON THE LAUNCH!

@kennethcohagen3539 Год назад

Can I get the specs of this engine? Rod length? Piston height? Stroke?

@singleken77 Год назад

cool car why do you wait to get to the track to work on the car?

@OldTimeRevival Год назад

Last minute stuff happens.

@truthofgod6213 10 месяцев назад

Where else can you test the suspension at full throttle and get time slips to see if adjustments are working or failing?

@ceedaddy Год назад

For being labelled 1 of the ugliest cars ever created...That 1 looks pretty badass !!!

@brianbloom1799 Год назад

If this guy thats riding in the car Built it, Why in the world did he sell it, and not drive it, at lease once, Just for Money,That was stupid

@OldTimeRevival Год назад

I think he wanted to focus his efforts on his other cars. But hey, if it didn't happen, this story probably wouldn't have been told so, it worked out! Tony, the previous owner, is a great guy!

@tonymancusi5657 Год назад

I have 3 other projects and it got to the point I realized I was not going to finish this car. Wanted to focus on cars I could drive on the street and race occasionally. This car was not a day or two from going down the strip. Jacob and Tim worked some crazy hours on it for two weeks straight. They had time and resources I didn’t. So I respectfully disagree with the idea it was a stupid decision. Regret not being able to finish it but it was a well thought out, difficult decision. In my opinion it turned out well for everyone. I’m getting some other things going, the car actually runs, and other people are able to follow the build of a pretty unique vehicle

@midgetrace Год назад

In 30 or 40 years we have learned how many runs aluminum rods will last before they window the block. 65 , 70 ?

@OldTimeRevival Год назад

I think more like 150 but... not sure. Definitely something to find out. 👍🏻

@circletrack7538 Год назад

I forgot a BIG question how MUCH does Sally weigh ( the car of course ) ???

@OldTimeRevival Год назад

2480 lbs

@circletrack7538 Год назад

@@OldTimeRevival AAH ! with our without fat driver ??? Sorry just kidding !!

@circletrack7538 Год назад

@@OldTimeRevival I have no room to talk I would never fit in that car now probably 15-20 years ago not now !!!

@circletrack7538 Год назад

@@OldTimeRevival My Vega was 2650 with me running low 9.0s @ 150.6 in best air high 9.2s in highest density adjusted altitude !!! Dyno'd just slightly above 700 HP @ 8100 rpm in a roller motor stroked 427 small block !!! I know this an 8" custom converter means everything for a solid proper ET !!!! LOVE to know the tire height and rear gear ratio !!! Would tell me a lot !!!!

@jrboost2395 11 месяцев назад

Where are the blue people at

@johnjwedrall4290 Год назад

You need to get out and let a driver who knows how to race that beast get in !!

@SallysSpeedShop Год назад

There’s a learning curve in any car you get in. Most of the problems I thought were me turned out to be issues with the car that we need to dial in.

@ldnwholesale8552 Год назад

Everyone has to learn to drive a new car

@1STGeneral Год назад

Some people need to watch a whole video where the owner and driver shows the problems and addresses how he plans to resolve the problems. How another driver would be able to compensate for the suspension abruptly stopping I don't know how that would be possible. I believe that a driver that understands and advances as the car gets sorted and advances is the most logical long-term program....My 2 cents 😊

@genedwg6689 Год назад

You’re proving to racers it’s more fun with a 4 oh won! Glad you’re sharing the experience with the former owners and us!

@stuntgirl56-therachelvande24 Год назад

The funny thing is we drove these 'race cars' in the 70's every day that kids now days say are not practical. The technology was sticks and rocks but the hay day of the 60's and 70's were our everyday grocery and go to drive-in cars. Fuel was high octane, FM radios were the new thing and Purple Hornies, Hooker Headers and Cragars were the bomb. The secret was always power to weight ratio. Some got it some did not. AMC was the secret weapon that a few of us explored. The fun of making the drivers of Big 3 take the long way home because they just got beat by a Rambler was more fun than the money, every time.

@gordocarbo 11 месяцев назад

Agree...my aunt dailied a 68 Jav or her boyfriends 68 AMX he sold it finally 3 yrs ago. No power steering, G60s she never said once it was tough to drive. Most 30 yr olds would say its undrivable. Babysitter dailied a 69 SS 396 Chevelle. No nannies, electronics just using your noggin for something other than being glued to a celphone

@volvobrynk 9 месяцев назад

So you are telling me you ran a rubbed, tube framed AMC for a daily? Or just old cars, as daily’s? I ran my first car, a 40yrs old Volvo, as a daily from 2002-2011, when I blew it apart and restored it. Old cars is always worth it!

@puddleduckist Год назад

Looks great n sounds mean! 10.8 is great on it's first pass! Looked like u launched it very softly. Definitely has much more in it!!! Rock on 🤘 guys!!!

@The1502flash Год назад

A little friendly advice if you don’t mind. 😁 something to think about: from the video I‘be seen of your car (BAD ASS by the way) it hasn’t left hard enough to dent that frame rail. The rear suspension has barely moved at all. You’re going to need to raise the launch rpm to at least 3500. Also you may need to turn the motor to 6000 for a decent burn out. Find out the engines red line. If its 7500rpm shift at 7200 or even 7000. Set that shift light on your tach and you will see it in your peripheral vision. I’d guess that Bad Boy will run 9.90’s at which point they will ask you for your Compatition drivers license lol. I’ve been racing since I was 20 and I’m 60 now. I have a big tire 88 mustang that sits like your car. I love big tire cars. Good luck my friend.🏁🇺🇸

@shoptalk5423 11 месяцев назад

I’m a Sbc guy and I know you want to launch at your highest torque. On the Dyno my high torque is right at 4300. I launch at 4500. I would think he needs to launch at about the same. Just a thought. Love the car

@63grandsport11 Год назад

Great lakes Dragway. I've been going there since 1959. Glad to see you made it.

@SallysSpeedShop Год назад

Such a cool little drag strip! This was my 2nd time there, first time racing though 👍🏼

@toddcallaghan5609 Год назад

Huge amc fan. What was the name of this event? I gotta go next year

@ivanrousseau5066 3 месяца назад

Great lakes was our local strip ,just off the hwy for Wisconsin/ Illinois people ,if your too tired to put mufflers back on you could take the chance and try to get home open dumps.

@bigbelconut Год назад

Dude don't go through first to neutral it's going to destroy the trans. Just shut off ignition. With the trans brake set brake and floor it.

@OldTimeRevival Год назад

Thanks for the feedback!

@stuntgirl56-therachelvande24 Год назад

The 1971 Javelin taillights are nice but the '72 grate brightens it up. the grill looks like 73-74? My '72 did not have the lights. However, as years take toll on original cars, it is easy for things to get altered, as long as it still dusts the competition, I am all for it. After owning 5 1969 SC/Rambers built with the help of Hurst Engineering, I appreciate AMC stuff and had years of fun dragging Broadway in downtown Portland Oregon, winning my $5 with a stock SC/Rambler, everyone always thought that I built it but it was a Super Car and hardly gets the due it is due. It was like driving a 'drug'. Imagine a 427/454 Nova but quicker..

@stuntgirl56-therachelvande24 Год назад

The AMC disc brake system was awesome with multiple piston calipers. These brakes were ideal for the time and would bring these road rockets to a speedy safe stop. Racing on a newly finished freeway near Oregon City in the early 1970's, I remember racing a V12 Jaguar. The speedometer on the 1970 Javelin pointed to 140mph at approximately 4 o'clock. I remember pushing in the clutch when the speedo needle was pointing straight down and coasting uphill for about a mile across the 'new 205' bridge and ducking off the West Linn exit at around120mph. Amazing car, Amazing Guardian Angels.

@stuntgirl56-therachelvande24 Год назад

Running an M40 or TH400/475 nice but TF8 would be a choice I would make. Less hydraulics and more mechanical. Valve body issues and intermediate clutch is where you would look, valve body spacer plate/gaskets. A lot to go wrong with the goofy shifter, I would just use a stock shifter out of an old Vega/Mustang/etc. I would want the pattern in the proper order. Too much electronics can bog you down with what to do. Just drive the car. Punch it and go.

@stuntgirl56-therachelvande24 Год назад

The AMC V8 was very similar to the Buick 401. The stroke a bit longer and the pistons large so, nearly small block rev speed with big block horsepower. The secret to AMC, + lightweight cheap crappy metal components, they were very light.

@MJPilote Год назад

That was AWESOME! I miss the racing, did some street bike and FunnyBike racing back in the late 90. You need to secure that hood with more Dzus, its loosing power as the wind blows over the carb, you need that scoop. If I had a car like that with so close to completion, it wouldn’t sit for 30 years. But my project has a lot of rust, so it has sat from 1999, but took it out from storage this summer, its time to make something out of it. Videos like this are a good inspiration! So thanks.

@adamrodgers2377 Год назад

Man this is so cool! Even with the adjustments you made to the Coilovers she still is sitting low and mean looking. Congratulations on such a awesome job. 👍🏼 By the way "Crazy" Al is my kind of people too. 😁

@doug9418 Год назад

Great video guys, thanks Dad for helping and getting involved. Now with the first track done and over with, you take her home and build her the way that you see fit. And then you bring her back to the track and you've got the Big Body Javelin Dragon. It's going to be amazing to see the out come, with each vid. Be Blessed ya'll and stay safe. 🇺🇸

@mordechaitaub3594 Год назад

Jacob you said you don't know what it is with green cars they just look so good well I know why that is. My favorite color is green. That is why.

@Mercmad Год назад

Tony " give me my car back...." 😁

@davevan8864 Год назад

I bought my 1973 BBO Javelin in 1993 from the original owner. I love the car.....very mild car. GREAT to see a AMC with AMC power!!!! You did well.....sorting out a car is TOUGH! We ran road racing SCCA back in the day. Sorting a new car was the toughest part of racing. Wish I could have been there to see all those AMC's!! Overall CONGRATS!!! PS...I think we have the exact trailer....a AMC thing?

@tylermallory2504 Год назад

I have almost the same engine build in my 4wd cj5 minus the aluminum rods, I'm 11.5:1, custom cam and valve train, but only a 2 barrel mounted sideways on an adapter plate for better tuning when running up steep hills. still makes a solid 400 horse! lol

@Knowledgepower-p2p Год назад

You’re leaving way to low on the trans break you should be at 4 to 5000

@approachingtarget.4503 Год назад

Beautiful car. It's just fits perfect in that environment.

@travisshephard5491 Год назад

There's nothing wrong with a 4 link suspension. I'm not sure you need to tear it all out. It might just be a set up issue. You might just reach out to some drag chassis builders for some advice. Or even Finnegan...

@txredline203 Год назад

Looks like it was a great weekend. New car blues with suspension hitting and transmission shifter. Who cares 🤷‍♂️!!!!! A 10:80 off the trailer! WOW 🤩 It was a very successful weekend in my eyes.

@leonardfoster6252 Год назад

Need to launch the car on the trans brake at a much higher rpm, around 4,500 rpm... I don't know what your converter stall is? It's not planting the rear tires good. Rear springs may be too stiff. If you can run 130 mph., it should run in the low 10's. Too many variables to get the car right...

@MaxNafeHorsemanship Год назад

This video was worth the wait. Wish you had cut the ears and ran it again. Would be interesting to see how much of a difference it made and see if the shifter now worked. I agree there is a lot more in it and it did very well right off the trailer. Can't even begin to describe how this whole thing makes a guy feel...and I don't even race. BRAVO!

@leonardfoster6252 Год назад

Looked like you shifted it too soon on one of the gears, but they might of been something wrong with the shifter or trans.? I assume the 60 ft. is slow? If you want to pickup the 60ft. times, put longer collectors on it... That makes more low end torque... What is the rear gear bud?

@OldTimeRevival Год назад

4.44

@michaelgrossman5528 Год назад

I loved these cars back in the day our nieghbor had THE MONSTER that he bought brand new in 1968

@_BYC Год назад

nice, i think you can hit 9s easy once you get use to the car

@charlesbrown5433 Год назад

The first motorcycle with a v8 was a bsa the man was called Michiana mad man died on the 265th run dropped it at 220 mph

@tylermallory2504 Год назад

it's a big tire car it can take WAY more hit off the brake. like 3500-3800 if not even 4k...

@alaskaruss1 Год назад

AWESOME video, AWESOME car, AWESOME motor!!! Love AMC thank you so very much for sharing the experience!!!

@stuntgirl56-therachelvande24 Год назад

Where is the 'Weather Eye" Ac unit?

@scottborkowski2411 Год назад

I would have cranked the shocks up and made another hit or 2 to make sure the trans was right and shifting proper.

@trentmoseley Год назад

Great vidja as always! Love this car more and more! Great job guys!

@jasonbose3507 Год назад

Dude, that Javelin is SICK! The thing is pure AWESOME 👍!!! Thanks for bringing this gem back to life ❤️. This thing sounds good and fast. Thanks for the video 📸.

@jomomma8291 Год назад

Aahhh.....Union Grove. Some many memories of Broadway Bob. So many Wednesday nights and weekends. Good times!!!

@robertbabbitt3829 Год назад

Raise the R.P.M. on the line, too at least 4000, and get the rears hot on the burn out.

@jayburrough4308 Год назад

Looking like everyone had their red white and blue cars out that day lol

@handyman75657 Год назад

As time goes by that old Metal will only get older. Just wish I could last as long as that Javlin will! Great Job in the quest of saving that old Metal for future Generations! Bravo for a job well done...

@hankblossom Год назад

You need to put an air cleaner on it, it will run much better at high speeds.

@robbieshobbies93 Год назад

"The javelin doesn't have a charging system." Tim: "It's ok. I rented a charger." As he leans on his dodge charger. Lmao.

@OldTimeRevival Год назад

😂

@mattsez2879 Год назад

launch control needs to be around 4200 rpm......your hitting the gas and bogging the engine out hard......let her eat

@SallysSpeedShop Год назад

Yes sir, we were planning to work up to around 4,200 RPM as the guy who used to race with that engine and trans mentioned, but the suspension was acting all kinds of wrong so we never worked our way up to that.

@stuntgirl56-therachelvande24 Год назад

Ford rearend? No cover with the cork gasket

@OldTimeRevival Год назад

No, reusable gasket.

@CliffEckstorm-xo3jr Год назад

Just awesome man! You got a 10.8 right out of the box...and she’s essentially 40 years old! Incredible! Wicked Cool! Dang she sounds so good... I agree that she’s a 9 second car...once you get all the fine tuning done on her...and the driver...😏😂😎 It will definitely happen. As loud as she is, making her a drag and drive car is ambitious. Remember, you are going to add a little weight making her street legal and adding the passenger seat. Most people don’t drive a 9 second drag car on the street though... but it will be cool as hell to see...👍🏻😎 I’m looking forward to seeing it all happen. Thanks for bringing us along for the ride. Oh yeah...🤔what’s her name? Did the two guys that dreamed her up have one?

@OldTimeRevival Год назад

No name yet. Got any ideas?

@MrGixxer1300r Год назад

Easy nine second car once you get the chassis working and you get used to whats in a fast car. Just take things at a gradual pace, and you will get in the nines without breaking a bunch of stuff. The quickest I have been is 10.0 on a bike, and that didn't happen in a pass or two. It just takes time, and experience, plus you have a great rig with a well done drive train. Good luck, keep up the hard work, and great content.

@Cougracer67 Год назад

Snowmobiles are run on the drag strip here in Boise Idaho at Firebird Raceway also. You Georgia boys must lead a sheltered life!

@OldTimeRevival Год назад

We don't have too many snowmobiles in Georgia. 😂

@battlestylespl Год назад

The tech isn't super strict at GLD lol. Tony's brother had a 73 that barely had rear floors in it where the seat mounted and passed. That was in the 90s, of course, but looks like nothing has changed. 😂 I really wish i could have been there to see the car run.

@tonymancusi5657 Год назад

Seat belts were literally laying on the floorboards. Show only. The days of being young and dumb

@4Wardlogistics Год назад

He's talkin about the thing letting go...lol Dude yhe thing did not spin the tire even a whole revolution. I think the guy is afraid of the car, if that is the case then it makes perfect sense that you are practically idling out of the hole. I guess he will get used to it

@SallysSpeedShop Год назад

Gotta work your way up to it. The plan was to keep upping the launch RPM, but with the rear end bouncing off the frame and unsettling the car on the launch it was never going to get better until that was resolved.

@4Wardlogistics Год назад

I have woke up everyone in the house screaming at this dude. Why does he keep rolling out of the hole Get that thing up on the 2step and let the button go bro. Geez

@OldTimeRevival Год назад

Thanks for the feedback. We're kinda new to this racing thing!

@terryeustice5399 Год назад

Extremely cool 😎 enjoyed the racing of your car. Thank you for sharing. 💯👍👊

@jimcabezola3051 Год назад

Where to start? What a triumph! Mahalo, Tony, for building this car and preserving it so well. We've all seen "treasured" vehicles that didn't look a tenth as nice as this one. Mahalo, Jacob, Tim et al for taking Tony's dream to its logical, successful, and above all...happy...conclusion. So happy to see it all reach this point. Looking forward to seeing more, if you've a mind to document it. Aloha and take care. Oh...and get some rest, too, won't you?

@oneofmany1087 Год назад

Boddy's alright, Driver needs work.

@Amxracer Год назад

Love that car . I need a AMC race car to go against my Chev Powered Javelin.

@danielleach2307 Год назад

Thanks for showing us your progress that was me in the red white and blue gremlin

@SallysSpeedShop Год назад

Ah very cool! That thing was sweet!

@matthewanderson7766 Год назад

Needs a blower or lots of nitrous nice job on the car

@xbear7473 Год назад

i am so excited to watch this video, i sent it to my dad before watching

@stuntgirl56-therachelvande24 Год назад

you just need a rubber snubber on the frame

@robertchapman4488 Год назад

Awesome video and car but if I can put my two cents worth of keyboard warrior I think you should be launching between 3500 and 4000.

@SallysSpeedShop Год назад

Yes sir! The plan was to work up to that and see how the car handled things, but the suspension issues kept us from getting to that point.

@Statykx Год назад

That thing is gonna need a chute.

@davidtaylor3094 Год назад

Jared sent me. New subscriber.

@Derf1313 11 месяцев назад

What a way to buy a long dusty dream, & breathe some life back into it... Hard to believe a NA is pulling 10's from that era, we used a blower on a built 401 to do 9.2 in 1980... So CONGRATS, beautiful ride, looking forward to its continuing legacy! Thanx !

@sdmoparmaninsd6713 Год назад

2k RPM launch limiter? Dude the vert flashes higher than that... 3k miiiinimum...probably wants like 4-4.5k :D

@parker1ray Год назад

My older brother rest his soul had a maroon Javelin in the mid 70's that we used to ride in! It was a cool car!

@OldTimeRevival Год назад

My older brother did too... Jacob's uncle.

@d.ricc6421 Год назад

Launch 2000? Nooo. Not enough

@brianbloom1799 Год назад

Just Because the car sat, after build , why would you think there would be a Problem, If it was built right it should be fine, The only Problem you Might have down the Road is the umbrella seals being dried up, But then I started motors that have started in 25 years never have any leaks,

@marckeisler4878 9 месяцев назад

You are launching below the stall, that's just wasting time at the line. It should have a 4000rpm stall, so you have to launch at least 3500 rpm, but expected at least 3800 unless you spin.