1973-87 Squarebody Side Window Channel/Felt Kit Install 

Congrats! This is the best square body window slides and seals because you explain the DETAILS, especially how to rel eave the clips. Two thumbs up !

Thanks for doing this video. You do a great job of explaining and showing how each step is done, what to watch out for and what tools are needed. OUTSTANDING!

I can't thank you enough for doing this, and am an LMC customer for life - as you can tell by my weekly orders. Learned that silicone spray helped: at least on my 1981 Silverado, you really need to want those seals to slide down the channels. Great piece of advice to roll the window up and reach in to make sure the first side is set before attempting the other side, because the second side is definitely the harder of the two. Discovered that my original door panels didn't have places for the interior clips - they were riveted in at the factory (I assume). So my LMC version won't fit, sadly. Wish I hadn't drilled out the old rivets and removed the piece, but the solution is going to be to reattach the old piece and save the new piece for when I replace the door panels someday. The old ones on the Silverado package had a line of chrome trim at the top and the LMC versions don't, so I'm happy with the result for now.

Windows on both sides of my '86 F250 have been waiting for new channel and felt for awhile now. looking for the parts now, and will, hopefully, be doing the work before much longer. Never done this type of stuff before, so, at 67, hope I'm not too old to learn. lol

Just got the same kit -- Really appreciate the video and the tips to make things easier! Lot of people refusing to pay new and crazy used car prices, are bringing out their old vehicles and makin'em driveable again - 81 Chevy C20 with utility bed.

With the help of your video, I was able to replace the original window channels and felts on my 1978 Ford Pinto Wagon. No more leaks when it rain! Thank you.

just did the windows on my 86 c-10 , everything went fairly well, you saved my a lot of headaches and aggravation, thanks!

Well he made that look easy, and I'm in hopes that I can do the same. Thank you this was helpful

Thank you for a great instructional video!

thank you! great video!

SO HELPFUL!!! First Bronco project DONE! whoopty whoooooooop!

Thank you! I appreciate it very much!

I need to do this so badly on my k10

Great job.

Thank you! This makes it seem much easier than I thought it would be. I have 1981 C10 that im about to change all my seals out on.

Great video

Excellent. Thanks

Love you brother. Thanks alot. 👍

My kit just came today, I’m ready to go

You make it look so easy i tried soap alittle spray not more than 5inches in the rear ill try powder but it doesn't want to go I have an 1987 G 20 van guess I try with the top but I see 2 screws in the top is that for holding the up seal in then guess do the front first which I didn't try wish you were here lol great video thanks

1st class video.

Looks like the truck is also getting new door seals. I cringed when you shut the door at the end. Good video.

Ok this was a 10 min job for him... so I should get it in a little over 30min, nice

I'm really hoping this process is similar for a 1988 G20 van because I'm trying this out tomorrow

Big up from France sitting in my 1977 K5!! Very clean video. Question : do you have to remove the vent window to change the seal or not?

I could not get the felt to slide down in channel like all these videos say do it! So, I moved to the other side of door where the window channel is bolted to door and removed the bolt so I could pull window away from channel and then pushed felt down with no problem. Is there a reason why no one suggests removing bolt on other side? Did i create an alignment problem or something by doing it this way?

Great videos as usual. Your videos are all awesome. I'm going to be doing this project. My truck is an 83 k10. Do you know if I can reassemble it using 1978 door panels and inside latch? I bought new door panels about 15 years ago for a 78 but the truck ended up being a parts truck when I found the frame cracked and twisted. So I have this 83 now. My door panels are in bad shape. Thanks much for your time and your expertise in these videos they help more than you know

When installing the outer piece on the window channel, you said the end of it goes behind the channel of the window? I got it in and the window goes up and down ok. But not sure if the end piece is correct. Can you show closer detail of it? Thanks

I can’t find the complete window seal kit on your website to fit a 1977 C-10. Is there such on there?

I ordered this kit but i got two sets for the drivers side.

Hello. Yesterday, I replaced the passenger side power window motor (acdelco) and it worked good until today when I replaced the window channel guide seal and now it struggles and won't go all the way up without me pushing it up. Did I do something wrong or does the seal need to break in or what?

I spend 45 min getting the felt to slide down using Silicone spray, then switching to talcum powder. It took me 5min using Car Soap

I wish you would do a how to video of changing the outside door handle on a square body C10. I can't find one any place on here.. I have enjoyed your vids and many of your products.

I'm gonna get this kit. Do you have the window channel gasket? It's the thin rubber that goes between the metal channel and the glass at the bottom of the glass to hold it in place. I assume to keep it from rattling. LMC calls it "Glass setting rubber"

Hi, I have installed the rubber and my windows are stiff to run up and down is there something to do to make the window running more smoothly?

Did this with an Amazon kit fit nicely but too tight to roll down now 🥲👍

Can a one piece kit be used in a door that had 2 piece? my truck is an 86 c10 so I ordered the one piece kit like most websites say but when I pulled my seals they are 2 piece and have another clip in the top towards the vent window.

Where does the rear main window guide bolt to the door on a 1977 Chevy c10 driver side door

If I want to do the vent windows at the same time, do the main windows need to be removed?

😭 my window channel won't slide down even though I lived the hell outta it. I was hoping there was more of a trick to it. 😢

Does the clip go inside or outside at the top of wing glass?

I replaced my seals now my window won’t move up or down. To be fair they’re power windows.

Where can I get the plastic tool and the hook tool you used in this video? Thanks!

I replaced felts and rubbers for the big window on my 71 C10 using someone else kit, because I did not now about Brothers Truck Parts. The wind noise continued. Question is, will your One Piece Window Kit eliminate the wind noise ?

Any chance you could do a video on replacing the window that goes in this door? Specifically I am looking to do this to a G30 van, but I think the process would be pretty similar for the vehicle you're working on here.

Dave my right door glass separates from the apparatus that carries the glass up and down, what is to be used to attach the glass to that apparatus?

I am looking for these windows channel for my 1990 chevy cavalier z24 v6. The anybody know where l can get it. Please let me know. Thanks.

Nice. Got one for a 1981 GMC Vandura?

I put the window channel felt in and now my window won't stay in the window channel. Anybody know why. Please help.

Kinda sucks they fired this guy after holly bought brothers out in January.his videos were very informative and helpful.they should have just kept him so he could still do diy and show off new parts for rhe company.

you make it look ez....wish it was

My 1982 k10 rubber seals won’t come out that easy I have to take the vent window out to take the remaining pieces out

Can someone anyone do a video of installing the inside door parts .. lock cylinder, manual window crank internal strike etc ... no one in 50 years has any videos out of the assembly 😢

Does Brothers actually manufacturer these parts? Are they purchased from an outside vendor?

where do i buy the rubber

ANYONE KNOW WHAT MODEL OR PART NUMBER TO ORDER IT

Any videos yet for a 68-72 window channel set ?