Good old school repair job on old trucks you can do this, long may they keep running. Modern high tech trucks are an electronic nightmare doubt they will last as long as this old Bedford. Nice truck to drive too.
I love when simple things like bolts cost you time or just reck important stuff. I once had a bolt jump off a table, dive into a tractor transmission, stop in sight but out of finger reach, and finally fall to the bottom of the transmission case. I had to split the tractor and partially strip the transmission to get it. I find taking a deep breath really helps. More breath allows for more bad words, and that is what really helps
Haha oh that sounds crazy ! Or bad design ? Like why do tractors need to be split in half ?! Like this truck of mine , any work on the front of the motors requires three drunk swearing midgets ! To abseil the block! Haha yea my editing takes all the choice language.
It's back together now. I think a bit of metals got in the water pump. Have to wait and see. Film out on Saturday. Good to hear from you, hope ya keeping well. 👍
James, making good progress, yeah Marty T is the boy alright but you’re doing alright mate and just a matter of time before you have a decent following. By the looks of it you have an interesting library of jobs you’ve done so can’t wait to get into them. Go the mighty ABs
Thankyou sir , yep keep chipping away I’ll get there one day! Haha yeah Marty’s the man. I’ll head up country and go visit him one day. He’s a good sort. Oh man sometimes I have too much on the go but that’s all g.
Did james finish the tk mlc bedford i had one to that i dun up but hat to sell it over medical sickness ever buy a nother one i would good job james on your video.
James i had a 69to70 tk cab over bedford 5speed 2speed diff if i could ever get a nother one i would in a 8ton hope to here from you soon james keep up the great work mark from down under.
Maybe MartyT watches your channel and reaches out to you with some of his bloodhound capacities for finding "stuff"? Pretty sure parts for older equipment in NZ is hard to come by without having some connections to sources. Looks like you've got things covered fairly well though, all things considered. Good luck with the build, should be a nice useful truck once you're done with it.
Hi Merle Haha yeah he’s the man ! It Shouldn’t be too hard to find stuff , I know there’s many Bedfords in New Zealand. I’m looking forward to the Using it again also. And thanks for watching
Matui69 may have some ideas … personally I feel someone may have over torqued it. Or it’s failed due to the gasket leaking right at the bolt miraculously turning it with each comprsssion stroke ?! Haha hmmm but the threads were stripped so … the damage to the rocker assembly is incredible !
Was the replacement head bolt a high tensile one? If not it could be replaced with an appropriate size capscrew as they are a much higher tensile strengh than a standard hex-headed bolt. You should be able to source another rocker shaft assembly ok. Ive only got a 4 cylinder version left or Id happily give you a shaft assembly. Injector will probably need another nozzle and a cap nut altho if undamaged and the needle is free in the nozzle it could live again. Use Anti-seize on the part of the body that slides into the head, either Copper or Nickle anti-seize ( Nickel taking the higher temp rating). Injector hold down bolts dont have to be heaved down ultra tight either. Pull down evenly and imagine the ratchet or bar you use is only around 4 inches long. Thats all the torque you need or you can distort the injectir body, more so with a longer body like the Bedford has.
Yes its a high tensile bolt, I was a little shocked at the damage to the rocker assembly by that bolt and of course the tear on the gasket was at that bolt also. I used the copper spray on gasket so thanks for that tip. Yes I’ll be super gentle snugging the injectors down.
Good its a high tensile one. Ive seen damage like that a few times before the combustion gas going thru the blow in the gasket helps pounds the broken/loose bolt up n down like a jackhammer. Its a not uncomon issue in Bedfords and the D-series Ford engines too. Should be a different animal when shes up n going again.
Good solid engine. Biggest thing I see with Bedfords nowadays are injectors dying from plain old age or NZ's rubbish diesel and injector pump leaks caused by the same 2 x reasons.
@@matui6983 true , and hey they’re getting old also , this one’s the same age as me ! Haha I maybe falling apart also. Hey question… I noticed online the Manual for this truck , states you adjust the rockers at idle speed ?… is that with it running ? I struggled with putting the alternator back on too lack of room up the front .. I’d struggle to find tdc if I had to look for marks …
