1980 Toyota Pickup Rat Rod 20r FIRST START!

Подписаться 124 тыс.

Просмотров 4 тыс.

50% 1

This week I'm finishing up the brakes, installing front shocks from '92 S10, sorting out an electrical and fuel issue, and then finally hearing the sweet rumble of the 20R engine with open shorty header. Next time I'll show how to build a custom exhaust!
My used OEM Toyota Parts for sale: yota.6thgeargar...
All about the 200w Pulsed Laser Machine: • Everything to know abo...
I don't have Patreon or ask for donations but you can support the channel with some rad gear from my store: 6thgeargarage.c...
Instagram: 6th_gear
6thGearGarage
More videos of this project:
Rusty 1980 Toyota Pickup Truck Long Bed(s) Build Intro: • My Rusty 1980 Toyota P...
1980 Toyota Long Bed Rusty Cab Floors: • 1980 Toyota Long Bed R...
More rusty floor repair (shorter version) • How to Fix a Rusty Car...
Cutting & replacing rusty rocker panel: • How to Replace/Fix Roc...
Removing the Cab: • Disassemble & Remove C...
Removing the engine: • Toyota 20R Engine Remo...
Toyota 20R Engine Teardown: • Toyota 20R Engine Tear...
Removing the Bed: • How to: Remove the Bed...
Prepare and Paint a Rusty Frame: • How to: Prepare and Pa...
Installing Steering Components on Toyota Pickup 2WD/RWD: • How to Install All New...
Removing 20R engine: • How To Remove 20R Engi...
20R engine Refresh: • How to Replace Gaskets...
Chassis/Frame Parts & Details: • 1980 Toyota Long Bed P...
How to Install Street Edge 3" Lowering Leaf Springs: • How to Install Street ...
How to install Mini C Notch: • How to Install Mini No...
Rusty Bed Swap: • How to: Remove a VERY ...
Gut the Engine Bay: • How to: Remove EVERYTH...
Drilling Spot Welds to remove front clip: • How to: Drill Out Spot...
Replacing a Rusty Battery Tray: • How to Replace Rusty B...
How to Weld/Install New Front Clip: • How to Weld/Install Ne...
How to Prep, Prime & Paint an Engine Bay: • How to Prep, Prime & P...
How to: Prep and Paint an Engine: • How to: Prep and Paint...
Cab Rear Wall Rust Repair in 3 Minutes: • Toyota Pickup Truck Ca...
How to remove the truck cab by myself: • How to Remove Toyota H...
Cleaning and Rustproofing the cab underside: • How to Prep and Paint ...
Install the truck cab with homemade gantry hoist: • How to Install a Truck...
Reassembling the whole truck after 18 months: • Finally Reassembling m...
How to install 4" Lowering Blocks: • How to install 4" Lowe...
How to rebuild a manual shifter for W50 5-speed transmission: • How to Rebuild Manual ...
Some other Toyota videos you may find helpful:
• How to: Remove 1980's ...
• How to: Toyota 4x4 Sol...
• Part 2: How to Restore...
• How to Remove Toyota T...
• How to: Clean/Restore ...
• How To: Disassemble a ...
• Toyota Solid Front Axl...
• How to Remove an Entir...
• How to Install/Upgrade...
• Install Toyota Pickup/...
• DIY: Toyota 4x4 Drive ...
• Trail Gear Hi-Steer in...
• Toyota Pickup Truck Fi...
• How to Properly Repair...
• DIY: Repairing Toyota ...
• Fixing Floor and Rocke...
• How to: Remove Headlin...
• How To Remove Toyota P...
• $100 Toyota 22RE Engin...
• How to: Compression Te...
• Remove Toyota Pickup T...
• How to: Toyota Pickup/...
• DIY: Toyota 4x4 Transf...
• How to Replace Toyota ...
• How to: Remove Toyota ...
• How to: Install Toyota...
• DIY: Repairing Toyota ...
• Breaking & Cutting Up ...
• Toyota Pickup/4Runner ...
• How to: Disassemble Ve...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@sandyv4819 2 месяца назад

Man that engine shakes when it starts up

@6thGearGarage Месяц назад

Yeah it sure does. That is with all new mounts too. It might be running rough from sitting 18 or so months. Carb could be a little gunked up.

@Bawkr Месяц назад

@@6thGearGarage This is great. I got to see one of these awhile back this is exactly how it sounds once it had fired a few times. His was super restored too he had factory style coatings on his brake booster etc. just to give an example of how meticulous it was. Can't wait to test fire and drop mine in.

@JTuggy_MissionFrmGlobalMargins Месяц назад

Firing it up is such a nice feeling. Even though I didn’t do the work to get it to this point, when you connected the fuel line and cranked the engine I was grinning from ear to ear!😆

@jhordancortez1815 Месяц назад

Un video de como reparar las puertas, guardafangos, bombin de freno :c del hidrovac

@greasyHands66 Месяц назад

That engine is not good man. It vibrates quite a lot. You need to take a look to that.

@6thGearGarage Месяц назад

It’s idling lower/rougher than it used to. Sitting for 18 months might have gunked up the carb, could need a good cleaning.

@6thGearGarage Месяц назад

All the motor mounts are new.

@greasyHands66 Месяц назад

Double check everything man, that amount of vibration is not normal. I'd check the compression for each cylinder first and then the carburettor if the compression is more or less even.

@greasyHands66 Месяц назад

Such a great work it would be a shame if that engine is not 100%! Great job!

@6thGearGarage Месяц назад

@@greasyHands66 Thanks. It was great before I took the truck apart, just leaked a lot of oil through the front seal. The engine was the nicest thing about the truck.

@LAJAP Месяц назад

I'm working on a 1991 Mitsubishi Lancer in Portugal. Thankfully, it is not half of the job you have there, but I'd love to have a repair manual like you have for your Toyota. Do you know where am I likely to find a reliable source for them manuals?

@6thGearGarage Месяц назад

I believe I found mine on eBay. You might check Amazon as well.

@endall6783 2 месяца назад

Hey can you start making post longer than a few minutes. Me personally I like longer posts cause short ones as soon as you start it's over. I know some will be short but that would be nice if they were farther apart. Sorry for being that guy!

@6thGearGarage Месяц назад

All the footage was over 20 mins long but I cut out the slow/boring parts and speed up other parts. I try to make it action packed from start to finish so people keep watching. When I have the chance for a long video, I will 👍👍

@jzues6434 Месяц назад

Hey man love the build !! I just picked up a 79 Toyota pick up and have never worked with a carb had a few questions see if your able to help

@6thGearGarage Месяц назад

Sure, I'll be glad to try to help. I don't have a ton of experience with these carbs either though. My truck has a weber 32/36 carb.

@bubstep816 2 месяца назад

That temp gauge looks questionable.

@6thGearGarage Месяц назад

Yeah I need to figure out what’s going on with that 👍

@WilliamEllison Месяц назад

That blue truck is way to low. It's a shame what people do to these trucks. That white parts truck is very nice.

@6thGearGarage Месяц назад

The blue and white trucks were both at the end of their life. Had some videos comparing both last year. I decided to make one truck from 2 bad ones. Eventually this one will get bodywork and paint.

@Pugs72 2 месяца назад

That Toyota buzzer brings back some memories! Oh the good ol days of replacing the front shocks that easily!! Now I have to put my life in danger with those coil overs 😂. Great video! Love the Toyota content.

@BrainsofFrank Месяц назад

Sounds like the engine is idling at about 5-600 rpm instead of about 850-975 rpm. Looks good. And it brings back memories of my '81 Toyota 4x4. 7 inches of lift on 36" military oz tires. Running the stock engine 5spd trans and axles. 5 gear was only good to use in 4low. I slowed down on the highway when I shifted to 5th 😂

@drewfleming7065 Месяц назад

Throw some timing into that puppy....Im guessing thats a 32 36 Weber....I run a 38mm and found that you cant get the idle mixture right with out some more timing....Wont idle with 1/2 turn in on idle screw with out more timing and end up setting the idle screw to many turns in to get a good idle then mixture screws are worthless cause the throttle plates are to far open....Next video is the drive!! I run 142mains, 185air, 50idle at sea level...but the 32 26 is different jetting

@6thGearGarage Месяц назад

Yeah it is a 32/36. It used to run perfect before I parked the truck to work on it. That was about 1.5 Yr ago. Carb could probably use a cleaning.

@drewfleming7065 Месяц назад

@@6thGearGarage check that fuel pressure, 2 to 3 psi and float level is critical....see you have a weber regulator. Dont know about 20R carbs but the 32/36 is 5 CFM under the OEM 22R carbs....Trick to tuning idle is keeping the throttle plates almost closed and a AFR gauge for the jetting....32/36 uses 1 idle jet on the primary for idle/progression, the other is for progression of the secondary....38 uses both for idle and progression...What may seems lean on a weber is usually rich, at least thats what Ive found...Mine, LCE stage 2 stroker, 22R bored, stroked, .50 lift cam double valve springs, chromoly light weight rods, forged pistons....LCE dyno test 159HP @ 5600 173LBS @3900....Good but would be better in a Celica then a 4x4...Next is a 4.3 Chevy V6...Burn outs soon????

@rgonz63ful Месяц назад

Great work. Are you in Southern California and if so up for a bit of consultation?

@6thGearGarage Месяц назад

Thanks and sorry... I'm in Ohio.

@talltom1129 2 месяца назад

About time! Just kidding, great series

@tedbastwock3810 Месяц назад

Congratulations!!!! Result of a lot of great work!! So glad I got to watch, cant wait for more 😎

@Gforeveryone 2 месяца назад

The 4wd fender flares are bolt on look mo balanced great build

@glen4130 2 месяца назад

It;s alive!

@me.ko.i1279 2 месяца назад

Nice

@TimmyCramer 2 месяца назад

Kickass!!

@chuckclark9464 2 месяца назад

👍🫵🪨 👏👏👏👏👏

@RonHelton Месяц назад

👍👍👍👍👍👍👍👍

@april7_ Месяц назад

7:30 so you can actually get safe from railroad crossing with a starter then, if you stump it! Have to test this in my Japan made 1990 Hilux, I bet it starts even with a gear in!

@6thGearGarage Месяц назад

Yes it will! Another reason I love old trucks 👍