looking forward to seeing the next video on this bike, I recently got a free KDX200 1983 which has been sitting for 10 years and it's pretty much the same as yours, but mine doesn't fully turn over tho. The frame is pretty much perfect, but I'm not sure if the spark works on it because I can't turn the engine over. I've currently removed the engine off of the frame, but I was hoping to see how you get the flywheel off because mine is rusted and I've been struggling with it (i don't have a puller by the way). thank you for the great content.
Thank you for your comments and for watching. I will be getting the next videos out very soon. As for the flywheel, I recommend going to your local auto parts or you can use this link for Amazon: amzn.to/36B1cSJ or amzn.to/2ICcrSE And if you don't have a case splitter and crank puller, here is a link for what I have that worked well: amzn.to/36Hm62A With those you will need to use 6mm bolts or threaded rod that will screw into the flywheel (these come with the case splitter I used, not the harmonic balancer remover). Also, you will need to get a bolt that is a little longer than the original at the center of the flywheel to push against but allow the flywheel to come off. I just used a bolt from a RMATV bolt kit that was about 1/2" longer than the origonal and I did NOT use the pointed end that attaches to the puller bolt, just use the blunt end or you will bend the center bolt. I will do my best to do a good video demo of how to remove it ASAP. Thanks again and I hope you get to ride your KDX soon.
Thank you for watching. This is turning out to be a fun little project and a little more than we thought we had to do, but a great learning experience. Please leave a comment with any questions, and let me know what you think the problem might be. Is it no fuel, no air or something else. Since we now have spark, there are really only a couple other things it could be. Got to love 2 strokers. Thank you all for your continued support, comments and feedback.
Hey Yall! Did you ever get it Figured out and Riding? I'm having same Issue with my daughters 2011 Kawi kx100dbf.Im headed out to the Barn to work on it, as we speak! Wish me luck! Great Video btw! Keep em coming! Yall have a new subscriber from Gulf Shores,Alabama! ~ROLL TIDE~
Sure did, it runs amazing very well, I hope to get the video for the rest of the build and our first ride up soon. Thank you for watching, commenting and subscribing. Hope that KX goes well.
