1995 Honda Acty 4WD 2 Inch Lift Kit FAIL

Подписаться 16 тыс.

Просмотров 4,2 тыс.

50% 1

It would not work on this one. So I talked to the owner and he said just put it back together.
Here is my store thegautomotiveandmorestore.pr...
This video was made as a demonstration on how to repair things and should not be done with out the proper training and safety equipment. The G Automotive and More and Its affiliates are not responsible for any damage or personal injury. Please if you don't have the ability to do these demonstrations, don't try and get a professional to do it for you.

Авто/Мото

Опубликовано:

17 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@woozleboy Месяц назад

These kits are fine, but you do need to check the shackle bushings. Some have steel tube inserts, some have thicker bushings. You don't want to drill out the holes on the straps or you'll weaken them. Longer shocks are needed. Factory are commonly too short. If they have been changed in their lifetime, then they likely would be longer. It isn't a bad kit, but you needed some more parts to work with it. Worked fine on my 94 SDX 4WD.

@TRYHARDMG Месяц назад

What shocks would you recomend?

@letsride3041 7 месяцев назад

This same kit worked great on my 94 acty real-time 4wd

@ShriKaav Месяц назад

I watched a different video of a guy mounting it "correctly"? If it's wrong it still worked He mounted both strut plates underneath the cabin, then reamed out the hole in the cab to get a socket on the bolt. At the aft end he disconnected the shocks, put the spacers in, then slowly loaded the springs until the mounts for the shocks got back in. Anyway, I'm about to do all this to my acty, I'll see how messed up the cv joint is, but I think once the weight is back on the springs it'll mellow out

@TheGAutomotiveAndMore Месяц назад

I was so worried about the rear CV joints being at the max angle. The owner did not want me to ream out the strut towers.

@davidmorris9204 9 месяцев назад

This lift kit will work perfectly with the mid engine models like Daihatsu, Mitsubishi and Suzuki...

@myfakeevo 7 месяцев назад

If you got the muddy bottom kit. They come with new bushings

@myfakeevo 7 месяцев назад

Also you do need to cut a slit into the Honda acty for the adjustment bolt. I can send a photo if you’d like

@nicholasreif3443 6 месяцев назад

@@myfakeevosend for me ty

@joeroe2839 5 месяцев назад

@@myfakeevoI wanna lift my 92 acty but idk what kit to get , some say just spacers some say spacers and spring n shocks 😢😢..would Like some info plz 🙏🏽

@myfakeevo 5 месяцев назад

⁠⁠@@joeroe2839I went with muddy bottom. It stiffened everything right up. The only downside is it puts a lot more stress on the cv shafts. I personally think putting proper shocks and springs will lift the truck up a half inch. And maybe that’s good enough. I think getting just the spacers is a terrible idea cause the stock shocks and springs are awful.