1998 Pontiac Trans Am Wheels, Tires, & Brakes - Project Red Bird Pt 3 - Stacey David's Gearz S16 E6

Подписаться 381 тыс.

Просмотров 80 тыс.

50% 1

We’ve had a blast beefing up the suspension on our old Bird. This car is going to handle like a pro! But with suspension upgrades and the type of driving we’re going to be doing, there are a few other things we need to take care of. We’ve got to make sure this bird is going to stop! Tag along as Stacey outfits this ride with some massive Baer brakes. Then it’s on to wheels and tires because you need some serious rubber on the road if you’re going to stick to the curves. This bird is almost ready to fly! This week on GearZ.
Featuring:
Baer Brakes
staceydavid.com/partners/baer...
Flowmaster
staceydavid.com/partners/flow...
Forgeline Wheels
staceydavid.com/partners/forg...
LMC Truck
staceydavid.com/partners/lmc-...
Mickey Thompson
staceydavid.com/partners/mick...
Cornwell Tools
staceydavid.com/partners/corn...
Woodward Fab
staceydavid.com/partners/wood...
Holley
staceydavid.com/partners/holl...

Авто/Мото

Опубликовано:

8 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@EfurdGarage Год назад

Its good to see full episodes again, since i didnt have access to the other networks. Now i can start watching episodes on saturday mornings like old times lol I would make a mess with the dipstick i will just carry a funnel in the back

@mrjon1985 Год назад

Love it, hasn't lost any of that energy from 20 years ago. Dang, we're all getting old haha.

@thebrian7channel474 Год назад

i been a fan of staceydavid when he was on trucks in 2004

@mrmaguilar22 Год назад

Thanks Stacey for the awesome video, I have an '02 WS6 in my garage to & love to see all the information you give on the channel. Reminds me of good times when I would wake up & see you on Saturday's it was the start of my weekend.

@thedaredevil1907 Год назад

Man I miss those weekends watching morning car shows with pops ....I still have the love of cars he put in me ...thank you Stacy for helping me keep those weekend days alive in my memory....miss you pop the fire bird is in your grandsons hands now he may not have know who you are but he has your love of motor all the same

@karnage7874 Год назад

This is my dream build car. I use to thumb through summit catalogs and look up all of the parts to build, someday I still hope to have a car like this with everything done just like it.

@jefferyrushing4654 Год назад

So happy to see you on RU-vid now, I've been following you since the trucks days.

@BoZn8r Год назад

Stacey, Love watching you transform vehicle's into art and awesome show stoppers!! Been following you since Trucks and I must say I am a huge fan 😎 I'm trying to get a channel going but with prices and shipping and availability of parts it's a struggle. Hopefully soon I can get setup and goin. Thanks for the content and keep the rubber side down 👍 Later!!

@Vincent-ke5zn Год назад

God bless our Veterans. Cool 😎 Caddy

@loum7008 10 месяцев назад

Great to see the big brake and awesome wheel/package!!! Just an FYI for viewers, stock brake components with high performance brake pads, stainless braided brake line s and a Strano master cylinder brace are up to any street or autocross use. For road racing Motul 600 brake fluid, Porterfield race pads and brake ducts work great. Don't get me wrong I'd prefer the $5k brake kit! Thanks for video!!! Really helpful to see exactly how to remove the axles. I haven't done it yet but will be doing bearings soon

@MidwestMotor Год назад

SO miss my triple black 1989 TA with the 5.7 (not the GTA model, just the GT special ordered with the 5.7) Never should've sold her. But now I'm on a mission to find a silver 2000-2002 WS6 TA! Love these videos! 🍺🍺🏁🏁

@JamesHughett Год назад

so happy to see you finally doing a 4th gen

@peterwittman6682 Месяц назад

The 4th gen f-body will fit 315/30-18 on all 4 corners. I'm currently running 315/30-18 rear and 295/35-18 front on my 98 trans am. The front tires are being upgraded to 315s. The car is lowered on a strano autocross suspension with no rub. The wheels are corvette 18x10.5 front and rear.

@michaelm3381 Год назад

Beautiful TA and I love the wheels.

@legioner9 Год назад

Beautiful car. Gorgeous name & gorgeous design it has.

@heavychevy4616 Год назад

as a f-body enthusiast, i thank u sir

@esnyd Год назад

The single most important suspension upgrade on those cars is sub-frame connectors. How those got overlooked is CRAZY!

@ValarAmstaffs Год назад

Great episode as always!!!

@scoob5170 Год назад

Man you just helped me so much with my F Body camaro build

@chesspiece81 Год назад

I've had several LS powered vehicles and 4 4th Gen F Bodies that either had a 402ci LS2, turbocharged 408, full bolt on with heads and cam LS1, and just a full bolt on. I absolutely LOVE these cars but you really should do some heads, cam, intake, headers, exhaust. Or better yet throw all those parts on a LS3 bottom end.

@dannychiguina3962 Год назад

Great job 👍👌

@OfficialStaceyDavid Год назад

Thanks!

@bigjohnharvey Год назад

Awesome!!

@Jason-hf7kx Год назад

Stacey, how do you determine wheel and tire sizes when upgrading? Also when adjusting ride height

@Furyataurus Год назад

specs on wheels??? I know they are 17x9.5" and 17x11, but what about back spacing on each???

@24theMoney 8 месяцев назад

Should use thread locker on the differential pin cross bolt.

@kalebringenberg6446 Год назад

315 is wide yes, but it is not the widest* you can fit, my 98 z28 has 345s on the rear, c6 z06 wheels, yeah you gotta BFH your wheel wells and re-undercoat it, but it is doable

@maldo72 8 месяцев назад

Stacy as always great content ... i now I will get flack for says this ... but as a 4th gen owner myself throwing 20k worth of parts is crazy for this platform when you can use the money to step up to a new platform with all this stuff already in place ... becuase yes these parts will make the car handle better but company's like this give the illusion that is will bring this car up modern standards from its live axle setup. Yes I am betting this was a sponsored car to sell products. When there are so many cheaper alternatives to set up these cars .. where I wished you would have explored..

@KyleFL2NC 5 месяцев назад

I'm really surprised that basic subframe connectors were not included on this build.

@abikerinpa Год назад

Nice ! ❤️😎

@brettkoeshall2325 Год назад

Stacey gives me some ideas for a hot rod project.

@clintcomer8349 Год назад

Does the Baer fixed caliper mount cause any issues with the free floating rotors on c-clip axles?

@dragus213 Год назад

probably the same issue as the guys running 09-14 ctsv calipers front and rear have to tap the brakes or install anti knockback springs in those

@michealayala-olivares5462 Год назад

I've been a fan for many years, but I really dont understand why, when you have the axel out, would you not go ahead and replace the seals and baring's? They are cheap and you can do easily while it's easy to get to.

@TheTerrorerror Год назад

What is the offset on the wheels?

@markgiessinger1833 Год назад

Have you ever swapped the 3.8L V6 for the V8 LS1? Is that something doable for a weekend wrencher.

@OfficialStaceyDavid Год назад

Good question! We'll probably talk more about this in a podcast, but it all depends on your skill level and tool selection. Since the engines in these cars almost have to come out from below, it would be MUCH easier with a lift. From there, I would do lots of research on how much of the ECU can work with the LS1. It might be more work than it's worth. - Gearz Team

@Lou_sassel315 Год назад

How do I order those brakes? I tried to follow the link in the description but I can’t find the same set up

@OfficialStaceyDavid Год назад

This should help! baer.com/1993-2002-F-Body-Camaro-FireBird-TransAm-Brakes/

@firewolf5680 Год назад

I love my 98 trans am ws6 but mine is black 6 speed

@mikekiefer3915 Год назад

I would have replaced the bearings and seals anyway. Not that expensive.

@24theMoney 8 месяцев назад

Such a complex parking brake..basically a set of drum brakes. But I guess these multi piston rear calipers don't have and E-brake like stock.

@Vincent-ke5zn Год назад

Great idea for adding oil, but my car doesn't leak or burn oil between changes

@markovich3605 Год назад

How did you fit 315s in the rear without tubbing wheel well and rolling the fenders? Those tires are gonna rub hard at that width! Love the build tho 😃

@harryyambag8761 Год назад

It's actually a very common size upgrade in the 4th Gen community. I did it on mine as well. A few people have said they've noticed a slight rubbing in the inner wheel well but only needed to hit it with a hammer a few times for the extra clearance. Def no tubing required although some have also rolled their fenders. I myself haven't had any issues with mine. No hammer or rolling fenders needed

@markovich3605 Год назад

@@harryyambag8761 Interesting 🤔 I wonder if some fbodies are different than others. I want to get 315s, but the normal 275s already seem like a tight fit on my '96. I like the look of the 315s in the rear.

@harryyambag8761 Год назад

@@markovich3605 not sure if the lt1s were any different but I don't think they were. I think it comes down to any suspension mods and the tires themselves. Even though they might be the same size, there are def some that are wider than the others. I always noticed it most going from nittos to bf Goodrich drag radials. The nittos have a slimmer profile for whatever reason.

@MG-bm5mk Год назад

@Mark Yurkovich, I have also read and heard that TA's have wider fenders than Camaros, but regardless, 315s are a very common fitment for fbodies...

@markovich3605 Год назад

@@harryyambag8761 Idk if the LS and LT cars are too different (wheel well wise at least, lol). I have a friend with an '01 Z28 and he got 315s in there with a BFH and had to roll the fenders. I forget the tire size. Hey, maybe i just gotta go for it and see what sticks haha I just dont like the idea of slamming the body with a hammer. 17x11s with 315s just looks badass on 4th gens.

@jimmaag4274 Год назад

What brand are those purple skates you guys use?

@OfficialStaceyDavid Год назад

They're GoJak brand

@jimmaag4274 Год назад

@@OfficialStaceyDavid thanks, I've been looking for some good ones.

@THROTTLEPOWER Год назад

👍👍

@davidvonanderseck8649 Год назад

Man that's vool

@manmatt445 Год назад

Make sure they know, driving wheels, driven wheels, tread pattern reverses. Stacy? Dunbuggy? Backwards front tires? On a dunbuggy of all vehicals?

@Rozza43 Год назад

I have been thinking about picking up an F body camaro

@OfficialStaceyDavid Год назад

Go for it! But don't wait around too long. They'll probably get expensive soon.

@PhenomProductions23 Год назад

I remember when I could find 2nd Gen and 3rd Gen Trans Ams between $3,500 and 6 grand for good ones 20 years ago when nobody wanted them used old dad cars. Today they're now desirable classics and you'll be lucky if you can get a good one for $20 grand that doesn't need a new wiring harness or new floors.

@ajaxracing Год назад

@@OfficialStaceyDavid my first car 86z28 paid 220 for it drove home😎🤘

@dannycoots9503 Год назад

👍

@michaelallen2501 Год назад

Speaking of 4th gen F-body's and Holley Retrobrite lights, why don't you use your connections with your Holley sponsors to help out us 93-97 Camaro owners? The only bolt-in option for headlights is another sealed beam housing and weak halogen bulb that cannot be replaced separately. They're a simple rectangle. Should be pretty easy to replicate. While they're at it make some for 4th gen Pontiacs and all tue 3rd gens and 4 eye Fox Body Mustangs.

@lepar119 Год назад

He is my hero. Buuuut 315s will rub unless you massage (with a hammer) those rear fender wells.

@1slow5point0 Год назад

I’ve had a couple of T/A’s and never had to clearance the wheel wells or roll the fenders for 315’s, even when lowered.

@evcass69 Год назад

You want around 42mm offset. The tire shoulder design, spring rate and eeak panhandle bar can effect rubbing as well.

@f477ymcf47 Год назад

What’s the blue car in the back?

@OfficialStaceyDavid Год назад

The Cheetah! Check out the Playlist on my channel to catch up on it.

@manmatt445 Год назад

If its on the street.

@johnmcdonough7344 Год назад

Lmao crazy to think your not touching one of these LS birds for less then 10k in good running condition.id like to see stacey do something with a truck LS motor.like a work truck or something would be badass

@nakedgoblin4090 Год назад

Wheres the next episode

@ungurdani8346 Год назад

Salut my friend super car super video subscribe subscribe...

@paulevans2153 Год назад

Still waiting on project Camaro.

@martinhernandez4370 8 месяцев назад

What happened to this build? 🤔

@christopherlastname7638 8 месяцев назад

I want an f-body so bad !

@user-yz6pe5bs8f 4 месяца назад

car probably cost 6K and they bolted on 8K in parts... gotta love being a car guy...

@evcass69 Год назад

Road-course "style" suspension. Style being the operative word. Only the UMI RR kmember has reinforced gussets for serious road course duty. Panhandle bar with the adjuster in the middle is another undesirable design. Drilled rotors, a bling product. Nice selection on Forgeline though.

@colindykes3061 Год назад

I came here just to see the wheel and tire specs

@bc1953 Год назад

Qould like u to work on mine

@valeriepickens2533 8 месяцев назад

In case nobody has noticed,... Stacy has added 15,000 dollars to this WS6 and hasn't even gotten to the body, interior, or engine! Finally, true folks! This is strictly a rich man hobby now! No more back yard mechanics,...no matter how much fun it was. Greed has made you strictly a spectator! Well, that's unless you want to live in an RV in Quartzside, Arizona! To bad. Now to teach your son to fix his car, just train him to be an electrician! Sad. I knew I would die, but I never expected my favorite past time to die before me.

@macek1455 Месяц назад

Im 20, in university, and a gen 4 Trans Am is my dream car. I’d love to fix up my own, but no one’s ever taught me how to work with cars. I think I have the persistence to figure it out, if it weren’t for the cost. I’ll have to wait till im in my 30’s before I have enough money to even try. So yeah. Its sad, but maybe one day I can cough up the money and make it happen.