@608 DIESEL That’s great to hear that you’ve had good luck with them. I bought a 2015 Polaris Sportsman 570SP new for my wife and I had a 14 sportsman 850xp both good machines but ended up selling them and buying a side by side.
Some people like to argue but they did have a 500ho in 2000. It wasn't branded the 500HO it just had a 40mm makuni carb and better cam and was built by the dealers with a kit that Polaris offered. It was a "performance" kit. I have one with the dealers build sheet stapled in the owners manual. Says it was a $350 performance option the dealer offered in 2000. Then polaris caught on and just made it the factory option in 01. to be even more specific it was a performance kit they sold for the scrambler that dealers installed on the sportsmans.
Lots of guys think they will lose their 'Man Card' if they ride an Automatic/CVT 4 wheeler, but not me. After growing up on a farm with no automatics, and 26 years OTR driving trucks, I'm wore out on shifting anything. I love the Polaris 4 wheelers. I had a 500 Scrambler 2 wheel drive, bought it new in 2001. They only thing I disliked, was the factory chain couldn't handle the power of the 500. After replacing the factory chain with a larger aftermarket chain, never had another issue with anything.
@Rick Kinsworthy Yeah I hear those people a lot… manual machines are fun however a properly setup CVT will get you through snow or mud better than a standard transmission in my experience. Love those Scramblers, I had a 500 a couple years ago. Very fun machines, I wished they would have the low range in them like the sportsman’s though. You don’t really need it for trail riding like they were designed for but it would still be nice to have.
I had got an 04 or 05 500HO as my first atv and holy are they rippers first I rode and first I worked on I loved it I’ll always have a sweet spot for a red Polaris 500
I picked up a 2001 polaris sportsman 500 ho 4x4 and it runs like a champ! Gave 750 for it. It has 423 hrs and 10256 miles on it and it will still kick up some dirt. I did have to replace all of the suspension bushing but that wasn't bad. But we love it rides amazing for its age!!
Those are solid. I have a 2003 HO, and it still goes while almost still being stock. Use it on a farm, outdoor runs, and ice fishing and kicks a$$ every time.
@@rockspowersports Right? Every time we crossed water deep enough we would pop the plug in the clutch cover out and let it dry for a few minutes before riding again.
The older the better in my words I got a 2002 Polaris 330 magnum no big head light or speedo planning on doing a speedo sometime but my personal ATV just manly use for hunting down here in North Nashville Tennessee Gallatin Tennessee is were I live and from
@Miller Bingham I had one of those magnum 330’s last year. I ended up selling it to my brother. Those are very tough machines and have plenty of power for a 330.
I have some questions for you tho I got one and in progress on rebuilding everything on it like a stator and all electronic systems are trashed man if you go on my channel I'm in process of getting everything replace everything tho I'm not a expert by no means I got a cell number if you can reach me that be nice I'm a first time ATV owner and learning from mudd mowers to ATVs
I picked up a 97 with 2200 mile on it that was just flat out neglected went through it front to back about 6 years ago super great bike strong reliable!
Best 4x4 utility atv built imo. On the price I remember the 99 retail sheets and even tho jd power said 6749 I recall 6999. Also the ebs model was 1000 more so 7999 until they made it standard. Ive owned 2 brand new the first and last year of the HO. 01 and 13. Better than the grizzlies king quads and rincon/rubicons ive owned. In 13 to get ebs you had to get the camo. Ive seen these with 60k miles. I would buy another new one in a heartbeat if they still made them. Can't find a used one here for under 3k.
@Motofarm mx They are a great utility machine. And Yeah I was going off the price I see online for msrp back then. It very well could of been more. 60k miles on any wheeler is impressive! The most I’ve seen on a sportsman 500 that come into the shop was probably 12,000 miles. Have you tried out the sportsman 570? Not a fan?
@@rockspowersports your model is the higher end one with the ebs back then. Crazy it was 1000 more. In 2000 it was standard and in 01 they came out with the HO. Got to compare these new since the neighbors had 2 new 2000s and I had a 01. The 00 might of had a tiny bit more bottom end but the 01 had a little more top. Different cam lifters and carb. I'm not a fan of them either. Bring back the sportsman 500. I'm sure trail guys might like them but my uses for a quad like this was around the farm and in the woods. With an occasional leisure ride.
@@rockspowersports first gen it was a 1k option. 2000 it was standard. Then I'm not exactly sure when they made it an option again. I believe in the last gen. It was cheaper to get as an option then than when it originally came out. By a good bit also.
Great video! I’ve enjoy watching that sportsman doing wheelies I have a 2002 and 2003 500s and I love them great old machines!! Hope we can see more videos soon👍👍
I've had several Polaris utility ATVs... two 850's and now on a 2022 570. The 570 is amazing. It has exactly the right amount of power. The 850 was great but I would never let a noob ride it because it's too fast.
Helps the 500 was so reliable as well. The Gen IV polaris's are still comparable to new machines which is incredible. So far the dual sensing ebs is still my favorite (I havent gotten a ADC model yet). You should do a work shoot out with the turbo diesel since the 500 was the diesel's competitor.
@98dodge360v8 The turbo has been removed from my Polaris diesel for now. I’m planning on installing it in one of my other diesels with the custom oversized piston.
@@rockspowersports Then that'll make a more original comparison. You always read the diesel was to expensive and under performed too the gas version. How true is that? Seems like a good vid to do. If you dont I might make a vid comparing it to a 02 400 sportsman.
@Lucas Perttu The plan was to sell this one. I have to many machines to keep them all.. I will do a utility/work video on this wheeler before I sell it.
Does anybody know what the welded plate on the front brush guard is designed to accept? It's the off-centered plate between the bars. I'd think something winch related, but, I can't find any information online about it.
Great review!! Enjoyed, thank you. May I ask how tight of a turn radius this machine has. And may I suggest you include that info in your reviews. Thanks again!
@Jim’s Tech Nonsense I usually do, I’ll usually sand off the faded part and then use the heat gun. I did a couple of test spots on this and it is faded deep. Heat gun just turns it hot pink at this point.
@RobL. They are pretty fast! This dirt road is pretty soft right now from the frost coming out of the ground, if it was tightened up I’d expect to see a few more mph out of it.
I had one of these but she was getting ready to blow up and hopped really bad when driving and hardly drove cause the belt was slipping for some reason even after replacing it
@@rockspowersports i believe so but the mechanic I was going to didn’t wanna fix it cause it would have been “too expensive” but I ended up selling it for 3k it had a rear seat and 3k lbs winch so I think the buyer and I got a good deal
@@rockspowersports my dad first owner 1996 so my dad give me 2012 since. My dad used working at caterpillar equipment so dad bring caterpillar oil, grease fit, transmission oil, other stuff on atv pretty reliable but few issues front end like tied rod, pad brakes but great atv. Strong engine much torque. I see sportsman 1999 not same as 1996 different
@Broc Fetz I would definetly look into the belt condition and your clutching on yours. They won’t wheelie just from stabbing the throttle, you either need to hit small bump in the trail like I did or pull back on the handle bars pretty good.