1mm Ref Magnet using Silhouette Cameo 5 & Kraft Blade 

Cameo 3 before, yes. Pero di na ko umulit sa mga sumunod na machines ko 🤭 bukod sa gugugol ng oras para sa adjusment, found out na in the long run pwede ma-damage ng alternative blades ang blade carriage. Since it is not made specifically for cameo machines. So since then original blades lang gamit ko and so far lahat ng machines ko from 2017 working and in perfect condition. And iba na mga owners, nagagamit pa nila ng maayos.

Hi! BLADE DEPTH IS 20, yung FORCE ang first three passes is 14 then last pass is 15. Magkaiba po sila. Hindi na po ako nagbago ng Blade Depth :)

@@user-dk6fx4yj5h try changing the material sa carriage 2. Pag may exclamation point beside it, ibig sabihin hindi pwede gamitin yung settings nun for cutting kaya walang lumalabas na option

Hello! yes, same lang settings sa cameo 4. if with adhesive, better nasa ibabaw yung adhesive. add ka na lang siguro ng force since may dadaan pa sya adhesive before yung mismong magnet. but gradual lang ang dagdag ha.

I don't recommend po. Since may smart cut po, may tendency na ma-cut yung printed image. And hindi po ganun ka-accurate si kraft blade for print and cut. Mas better po cut hiwalay.

@@kprintscraft what about po dun sa brother cutting machine mas okay po ba yun for ref magnets ?

@@ravenservando6221 sorry I can't say po. Never owned a brother cutting machine ever :)

@@kprintscraft thank you so much po

@@ravenservando6221 welcome :)

Blade - 11 (kraft Blade- 3mm) Force - 5 Passes - 2 Speed - 2 Yan lang po setting ko. Almost tagos na sa mat ang cut.

Hi! Nakalapat ba maigi yung kraft blade sa carriage?

what material are you trying to cut gamit ang kraft blade? this blade is not applicable for print and cut projects.

@@kprintscraft okay na po maam slamat, nakuha kona po, off ko yung registration.. tpos gumawa ako ng limang template na papa taas ang force, hirap pa din icut ung 1mm magnet sheet. Salamat po

@@AyronAwesome ok po, once naman na nag-cut through na kahit pano sa back ng magnet, madali na alisin yung magnet na na-cut. as long as manipis na lang naiiwan sa likod.

Kraft blade po gamit? 3mm?

@@kprintscraft yes po, 3 mm kraft blade din

Latest po, 4.5.7 kasi hindi po mag-work ang older version sa mga newest machines if hindi updated

@@zromeo30 meron po 2mm kraft blade for cameo 3. Yung pabilog din po. 3mm po kasi is for cameo 4 and 5 kasi square na po yung blade.

Hi! This is around 2x2inches. If ako po tatanungin sa price, 35 each po. Pero sakin po yun ah, mataas po talaga ko mag-price ha. Depende po sa computation nyo po sa gamit :)

Hi! Sorry late reply. My warning was about the blade, that if you use it often with a thick magnet sheet, you'll have to change blades often too since it is thick and tough to cut. But it can cut magnets, just have to do your own test cut so you'll know the best settings for your machine :)

@@kprintscraft Hey thank you so much for the reply. How often do I have to change the blade if I cut 1mm magnetic sheet? I just ordered a cameo 5 machine. My main project would be to cut magnetic sheets. Is there any alternative for 3mm Kraft blade like CB09?

@@saranyabalaji3122 i wouldn't recommend a replacement blade specially with the newest line up of machine. Those blades are not made specifically for our cameo machines, and in the long run, it can cause problem with your blade holder/carriage. With regards to how often, I guess it depends on the quantity. Your blade can last max of 1month if regular/daily use. You can add more depth or pressure if needed just in case.

@@kprintscraft Thank you so much for taking time to reply.

Hi! Yes, pwedeng i-same settings with cameo 4

Here po : shope.ee/9A1K8kcG2K

Masyado po makapal ang magnet for the original blade. Baka po nag uumpisa palang i-cut, putol na po original blade. Sayang po. Mas malaki po talaga ang kraft blade, so built po ito for thicker materials like magnet

@@kprintscraft san po need bumili?link po at cameo4 po gamit q

slamat po

@@kristillaguno9940 3mm kraft blade po pwede. You can check beehappy, arfs and crafts or usagi. Authorized dealers yan ng Silhouette Ph :)