1st Gold Minelab’s X-Terra Pro Beach Metal Detecting. Live digs. Things to do in Florida. Xterra 

Exactly! We'll said.

Howdy, Leann! ☺️ Merry Christmas!

I think that he hasn't increased the X-Terra Pro iron volume and it's a hidden features that nobody has ever seen it Or read the instructions and I have watched so many videos of people that don't even change the Tone's Break and the minus-16 is on the Screen and they keep going By it and it will change back every time you turn on the X-Terra Pro..... and keep a lower sensitivity and the X-Terra Pro can get the targets and I started with 12 Sensitivity on the very first time I was using it and I switch between 12- 18 Sensitivity and nothing higher than 20 without any kind of ground Feedback and that's why the Jumpy VDI is Happening with the X-Terra Pro and the junk Targets and it's a Very Powerful Detector and the Budget Price Range....❤....

Thanks. I’ve watched videos where detectorists can differentiate targets by the sound it makes. I’ll have to remember this wobble sound. This is one thing I don’t like. No iron sound unless pin pointing or you use threshold audio. I got lucky swinging over the knife.

​​​​@@Gaptains_vloGHave you turned it up yet the Iron Volume in the Hidden Settings ????? 🤔🤔 And I will try to tell you how to get there, Push the Settings Button and go over to the volume and then hold the Settings Button down and Up comes e1 and that's the Iron volume and just push the Plus button and it will go up and then after that just hold the Settings button again and it will get you back out and then you can change the Tone's Settings when you go to the -16 and then hold the Settings Button again and it will change and e1 will show up again and that's the tone break if I have read it right and possibly the accept/reject tone function which is hidden and about every video that I have seen of the X-Terra Pro everyone hasn't changed the -16 and just scroll through again and again and I hope that helps you with the X-Terra Pro... and the iron volume and the tone break....Edit And Lower the Sensitivity down below 20 Sensitivity (15)and the X-Terra Pro will really sound off on the good Targets and then when you get to Another Park the Same Settings that would work at one place May not work at another it's really Site Dependent on the X-Terra Pro Setup.... edit again and the Settings that you have done will have to be done again each time you turn on the X-Terra Pro At least on the tone break always goes back to -16 every time and if you use 5 Tone it will only go up some but when you are using the All Tone's it will go All the way to the top of the scale and I haven't tried it on the Depth Tone And see how it goes ?? YET.... And Good Luck 🤞....