No video :(

2001 Dodge Ram Headliner Replacement

Подписаться 100

Просмотров 78 тыс.

50% 1

Remove, recover, and replace headliner in a 2001 Dodge Ram 2500 Quad cab. If your are looking at doing this repair, hopefully this video will help you out. This procedure would mostly likely be the same for a 1998 - 2001 Dodge Ram quad cab, 1500 or 2500.
Here is another video with more detail of the fabric application process: • Headliner Repair - Don...
I bought my supplies off amazon, since we live out in the sticks. Here is a link to the fabric and glue I purchased for this project:
Fabric
www.amazon.com/gp/product/B00...
Glue
www.amazon.com/3M-08074-Spray...

Опубликовано:

6 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@meldeer6253 5 месяцев назад

the best part is you did it your self im 68 iv done this stuf all my life and you did a excellent job i proly cant do any better thank you LOOKS GOOD

@r6smurf186 2 года назад

Was the perfect opportunity to use black or dark brown fabric for the headliner to match interior!

@etwalgade 6 лет назад

I should mention... I am not doing this for money or sponsors, or subscriptions. I am just a guy who decided to tackle this myself, because its allot cheaper than having someone else doing it. With that in mind I had a hard time find a complete source of truth for some of the tricky aspects of doing this, so I created my own video, in hopes it will help someone else out there! If this helps you, let me know.

@rogerash0 5 лет назад

What glue/adhesive did you use, and how did you go about making good adhesion while it set up? Also where did you choose to source your fabric?

@flyintime6320 5 лет назад

Excellent final product & video. Thanks for the great detail in your video, buddy. I'm grateful to you for paying careful attention before and during the renovation. You should feel good about all your selfless efforts 👍

@athletejmv 4 года назад

Thanks for sharing. LMK Trucks sells a roof liner that bolts in, no fabric and will NEVER sag. Just wanted to share as well.

@godfamilycountry4211 3 года назад

Help immensely. Thx so much. Looks awesome too. Hopefully mine comes out nice.

@212Tan Год назад

thanks man! i have worked on cars for 13 years but never have i removed a headliner. it nice to watch what you are going to do before you actually go do it! thanks for posting and sharing advice

@godfamilycountry4211 3 года назад

Nice job. Appreciate you talking the time to show us ram guys how to do this. Looks great.

@allkindsofgains8012 6 лет назад

Doing my headliner tomorrow, thank you for the help. Doing my 97 Dodge Ram.

@etwalgade 6 лет назад

My pleasure. That's why I created the video. I was having trouble finding examples of doing this start to finish when I was going to do mine. Hope it goes well for you.

@guesswhooldtimer2358 2 года назад

Looks great to me. Thanks for taking the time to show how it’s done.

@mikescustomworx4680 2 года назад

Awesome job, deff a lot easier with the way our doors are. Full access to the inside of the truck.

@casualsniping4865 6 лет назад

you are the man! couldn't figure out how to get the damn overhead console off but you made the whole replacement process a breeze! my 99 ram looks great! I appreciate it!

@miguelrodriguez9372 3 года назад

Great video. Ready to repair my 99 dodge headliner. Thank you so much!

@technoshaman001 2 года назад

I have a 99 dodge and need to replace the headliner too

@thuss5162 6 лет назад

A angle grinder with a wire brush and a vacuum .would make short work on stripping the foam , just go slow and easy. Good video thanks

@Carsonbobarson98 5 лет назад

Thankyou so much i was so worried i was going to break the center console

@drevans4100 5 лет назад

Awesome video! Thank you sir, very helpful

@john-cx7nt 2 года назад

Thanks for the video. It helped a lot!!

@Advertisement41 3 года назад

Looks good. I plan on doing mine but I want to change it the dark gray and paint the plastic pieces updating the dome light to LED.

@jaclyncremeans4883 6 лет назад

Love the vid it helped a lot

@davidhines4189 3 года назад

How do the coat hooks go back in. I know they are two pieces but don't know how to get them back into their spots.

@wendyboyd2355 2 года назад

Doing mine also

@mxnation9912 2 года назад

Thanks man this really helped

@tommiller8416 6 лет назад

Great video. I've been trying to figure out how to get the headliner out of my 99 which has the same issues yours did. Thanks!

@GusSaar 3 года назад

put the visor screws just slightly in after you rewove the visor, that makes it very easy to locate the holes when reinstalling

@ericmoldero 4 года назад

thanks man, getting ready to do this now, my headliner is deteriorating

@ericmoldero 4 года назад

the soft foam on my headliner is turning to dust, dusting my entire cab

@7Supernova7 4 года назад

Great dodge vid. Do you have any more?

@sboverbs 6 лет назад

Thankful for this video. It is extremely helpful. Do you have a link to this one you bought so I have no issues...theres so many out there. Most stay dash cover replacement and wasn't positive if thats what I need because in red letters it says its a cover almost like it isn't like yours. Yours is what I am looking for..any help would be really appreciated.. Thanks again

@gavinmcgraw6642 Год назад

How do you get the clips out I’ve been trying to many ways for over an hour

@melvinlara-falcone2362 2 года назад

Nice job looks real pro one thing though you didn’t show us The adhesive you used I’ll give this video👍👍👍👍👍

@etwalgade 2 года назад

Glue: www.amazon.com/3M-08074-Spray-Trim-Adhesive/dp/B000CPZYY0/ref=sr_1_2?keywords=3m+headliner+adhesive+spray+38808&qid=1641181292&sprefix=3m+headl%2Caps%2C97&sr=8-2

@missiondatruthe7058 Месяц назад

HOw did you reinstall the coat hanger clips?

@jessiesandoval7356 6 лет назад

With the headliner removed, could you see the clearance lights holes for a truck that doesn't have clearance lights?

@etwalgade 6 лет назад

no clearance light holes on my truck.

@yvonnejohnston2791 4 месяца назад

Thank you so much,,

@kidt3068 4 года назад

In my experience if you press the padding too hard while the glue is still wet it will leave lumps. Nice even pressure. Gentle. Let the glue dry before flipping over and installing.

@isaiasrico7972 Год назад

Hi where you get the carpet

@Kyle_Godfrey111 5 лет назад

How did you get the connector out of the dome light. Can’t get my fingers int their

@etwalgade 5 лет назад

It;s been a while since I did this, but I think I had to push it far to one side so that some tabs holding it in would be exposed so I could lower it down and pop it out.

@etwalgade 6 лет назад

I did not see any holes for clearance lights

@donsnoble5267 4 года назад

Great instructional video... I have the same truck style 2002 ram 2500 quad cab also how many yards of fabric did you purchase? I didn’t hear it during your video. Amazon sells it by the yard I most likely not buy enough

@etwalgade 4 года назад

Thanks so much for the comment! It was one of those things where I could not find this information when I did mine, so I decided to make this video in case it helped someone else. Here is a link to the fabric I bought for mine off Amazon: www.amazon.com/gp/product/B00X2TLA82/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 It was a 120" x 60". With that much, I had plenty left over. I am also pleased to report the headliner is still looking good. Hope this answers your question.

@deasttn 3 года назад

Measure, but I'd say 2 yards is plenty. A yard and half might be enough (not every store will sell cloth by half yard, though?)

@missiondatruthe7058 Месяц назад

they're hard asf to get back in

@allythompson6973 5 лет назад

So what kind of fabric did you use and glue? Is it kind of like an iron-on fabric or peel and apply?

@etwalgade 5 лет назад

I used an auto headliner fabric I purchased from Amazon. You can find the link here: www.amazon.com/gp/product/B00X2TLA82/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 The glue I used was from 3m. You can find it here: www.amazon.com/gp/product/B004MEBENM/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1

@deasttn 3 года назад

You can find headliner material online and at most fabric stores. The soapy adhesive is available at most automotive part stores (and online, of course)

@JNCdlS 4 года назад

How is it looking a couple years later, still no sagging?

@etwalgade 3 года назад

Still looking great. That 3M glue is doing it's job!

@JNCdlS 3 года назад

@@etwalgade awesome, i'm glad to hear

@05keywest 5 лет назад

How do you get it out of the truck. That’s the problem I’m haveung

@etwalgade 5 лет назад

In my case I have a quad cab. I had to open both doors, and then fold the front seats as flat as the would go. Once its loose, drop it down, then angel the back up toward the rear window as high as it can go and drop the front of the headliner toward the floor of the front seat. From there I kind of jimmied it back and forth until I was able to slide it out.

@deasttn 3 года назад

Tetris. Yes, getting it out of the vehicle can be challenging. Some vehicles require you to lower the seats or twist the headliner. Remove the seat if it's too hard

@billcollinspt 6 лет назад

Nice job. Where and what kind of fabric? Glue used? Thanks for any feedback you can give me. Thanks!

@etwalgade 6 лет назад

The fabric was some generic headliner fabric I bought on amazon, you can find it here: www.amazon.com/gp/product/B00X2TLA82/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 The glue is 3M 38808 Headliner and Fabric Adhesive, also bought off amazone, here: www.amazon.com/gp/product/B004MEBENM/ref=oh_aui_detailpage_o04_s02?ie=UTF8&psc=1 My biggest piece of advice on that is buy two cans. I only bought and it barely was enough. In hindsight, I wish I had two so I could be more liberal with the application.

@Ihelpyouwithtutorial 6 лет назад

Has it started sag at all?

@etwalgade 6 лет назад

no, still looks great.

@moreira2218 5 месяцев назад

where can i get the fabric from?

@etwalgade 5 месяцев назад

Amazon: www.amazon.com/gp/product/B00X2TLA82/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

@benniedonald Год назад

What is the shell made of???

@etwalgade Год назад

It's kind of a fiber board.

@zerotodona1495 3 года назад

Oh! A scraper!!!

@deasttn 3 года назад

I used a nylon drill brush. That drill brush is super handy for all sorts of things.

@damiandelapp5490 Год назад

Thats why i just paid a little shop $500 to let them do it..I look at like im going to have a day in it and materials…how much is my time worth

@maciejolejniczak151 3 года назад

Change Your dome light to a led ,You got burnt bulb holder

@davemccloy4600 2 года назад

n 7:78h

@matthewhuff5815 10 месяцев назад

........dat ain't no center console

@fourfortyroadrunner6701 Год назад

"Stellantis" should have their corporate collective asses kicked for this nonsense. I just got done converting my 01 Cummins to 4WD, using a donor V10 96 and a "rolling" 98 parts frame.