2001 ZX6R carburetor cleaning 

my bad 110 130hp was 05 model still only 10 or so less than 2023 and 05 had more than brand new one

Just take your time and do 1 carb at a time and you'll be fine . Thanks and glad the videos help

My bike has been down all summer because of the carb, shops saying 4-500 ima do it tomorrow

I use thiners as that is what I had around but you can use any thiners or solvent as it's to let the jets soak and help break down any crap that in them .

The one on the bike in this video came on the bike . I've now changed the exhaustsince then. This is the video of the new exhaust with the info on where I got it from . Hope this helps. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n8xgD0_6rtc.htmlsi=GWdB1OAd43OT3bnC

Thanks for the comment and glad the channel is of help to you . Love the 636 , was looking for one until I came across my zx6r .

Hi thanks for the comment, make sure to subscribe and check out some of my other videos

About 7 out of 10, then trickiest bit for me was undoing the clamps on the rubbers

Hi and thank you , the tool at 5m12s is hose clamp pliers. Difficulty out of 10 I would say the job is a 6 .

Your best of fitting the correct ones for your bike otherwise you can run the risk of the bowls not sealing correctly and fuel leaking.

Hi yes I do but if your looking to restrict your bike to meet the A2 licence requirements the zx6r is too powerful for it to comply to the A2 licence restrictions. The zx6r is 110 bhp and the A2 licence only allows you to restrict bikes less than 94 bhp .

@@f15hlermoto Okay thank you!. "licence only allows you to restrict bikes less than 94 bhp" is it only in UK? Because in my country it doesn't say anything about this. It just says minimum 20kwh, maximum 35kwh, cant be less than 245cc and Power-to-mass ratio cannot be more than 0,2 kW/kg

It's for the UK and the eu . What country are you in ?

@@f15hlermoto Im from Lithuania

Ahh OK, you'll most probably have to look for a carb restriction kit . They are like washers that sit between your carbs and intake boots and restrict the air fuel flow

For a full exhaust system blackwidow do one for the zx6r what is universal for most the end cans they do and it isn't too badly priced . If it is just an endcan change you are after most 3 bolt end cans should fit and its is as simple as unbolt the original end can and bolt the new one on , 5 min job

Thank you , I'm glad the videos on the zx6r are of help to you 😊 more maintenance videos will be coming soon .

Hey I have a 2000 zx6r aswell an it is dying when I give it throttle and don’t idle without choke any thoughts I was thinking maybe the carbs not getting airflow or pins could b clogged please open to suggestions

Hi it sounds like your jets could be blocked , try giving the carbs and jets clean and see if that helps

Thanks 👍

Could be vacume leak or mabey un balanced carbs

@@f15hlermoto synched carbs replaced intake boots they where cracked

OK , cracked boots will cause a vacume leak . Did replacing them and balancing the carbs fix your problem ?

What would 2006 zzr600 be considered as j2 the engine in my bike running gear is 01 Kawasaki ninja zx6r frame is 2006 zzr600

Where abouts in the world are you ? I've just had a Google and found out that in other countries there is a bike under the zzr600 name what looks identical to a 2001 zx6r j2 .

Thank you 😊 one of my mates has a j1 , not much difference between the j1 and j2 . Both good bikes