2004 Acura TSX || Winjet Automotive Aftermarket Foglights 

The video was helpful and just finished my fogs! Thank you!

Used your instructions, very helpful. I did not use the fuse adapter because the one I purchased was too large. I ended up just wrapping the ignition wire to the 7.5 amp fuse. I also did not remove the bumper.

If you have big hands and/or also pushed the grommet through getting it stuck, you can cut a small slit and use the grommet that has the big harness coming through, its right near the fuse panel also. Much easier.

4 years later. so that red wire that's going into your fuse box in the car ... what is it connected to; is it part of the package or something you spliced on the car?

If you want amber fogs, make sure to either buy the amber kit, or if you wanna DIY it and wrap with headlight tint, then get some amber bulbs. I got some tint that I thought was come out too yellow (almost green) when I bought it, but after installing, I realized the light was actually too white, because of the bulbs

Hello, thanks for the video it was very helpful. My foglights work a for awhile then stop working. I then have to unplug the from the fuse box in the car then they might start working again. I have checked the wiring and changed all of the fuses. Any other suggestions?

it looks like you tried your best on this video and I like that, thank you very much it helped alot!!

Wait so instead of using a wire splice connector for the red wire & ACC you use the add on fuse connector instead ?

so the harness winjet gives you has a switch plug that goes into your fog light switch. it has the yellow female plug attached to it as well as the red positive wire and the black ground. i see the black ground goes to the 10mm ground bolt but you are taking the red wire and connecting it directly to that add on adapter you bought from o'reilys part store so you don't have to connect to the black and red accessory wire harness you mentioned about doing a t tap on?

Does the fog light switch naturally glow when car is off? Mine does and wanna know if it’s normal.

Wow thanks so much for making this video! I had the hardest time trying to figure out how to feed the wire through firewall.

This video is old but hopefully you reply do you need 2 fuses connected to power it on?

Is there a slight green/ yellow glow around your fog light switch? I just had mine installed and that's what it seems.

Thank you, this is very helpful!

didn't want to use a relay and battery votage with the factory switch?

Helpful 💪 thanks just did mine today

Where did you managed to get the OEM fog switch, part number?

what disappointed me was that when I got my aftermarket fogs on... the adjustability of them wasn't what I expected.

thanks man ,helped me wire mines

Helpful tutorial thanks man

Does your sun roof button, VSA button, and heated seats buttons light up/illuminate in the dark when your driving lights are on?

You Rock Hoang !

Do your fogs switch off when your high beams are on? I want to get fogs but in my state, they must switch off when high beams are on in order to pass inspection.

You think this’ll work with my OEM wiring? My fog light cracked and im not tryin to pay $139 a PIECE for them.

I wired my 2005 this way but if I turn the fog lights off and take the key out the radio stays on until I turn the switch back to on. Anyone else have this problem. And all my wires are different colors

Niceee

is there a died bug at 00:55 ?

Doing this on my 2000 TL boyyy

Thanks

do you know how to do it for a nissan murano 2005

wat website did u get that print out of the wiring?

what is the brand of those fog lights?

Whats the fuse connector called

How are they now?