Thanks for the video. My Recon was bought used and never wanted to start properly. Pulled the carb apart and cleaned the jets and adjusted the fuel air screw and it fires up first time. Also the vacuum hoses were in the wrong location. Fixed👍 Thx again
Thanks Bob! If you need more helpful tips, check out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0AdFxkJiOg.html and if you need parts: www.ebay.com/str/midnebraskamotorsports. thanks for watching and the comment.
Definitely not. Keep it closed unless you need to empty the fuel out of the carb. Thanks for the comment! Let us know if there is anything we can help with. Check out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0AdFxkJiOg.html for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.
Hi we were leaking fuel from the carb drain (screw was open - understood it is supposed to be open to allow overflow if the gas gets above the post inside the bowl…because the float isn’t seating the needle properly). Extensive attempts to clean the seat and needle did not work…so installed entirely new, OEM carb. Still leaks from the drain when screw is open! Other sites say to just close the drain screw! That works, and ATV starts & runs…but understood from your video the drain screw should remain open. Help?!!
I have an ‘04 recon and it starts, idles,and runs great. At idle however the overflow hose from the bowl drips gas constantly. Turning off the gas line stops it. What do you recommend might be the trouble maker?