2007 Hydramaster Boxxer 421 Used Truckmount $2500 in San Antonio Tx 

2007 Hydramaster Boxxer 421 Used Truckmount $2500 in San Antonio Tx
Carburetor was cleaned
Added a new fuel pump
New fuel filter added
Changed oil in engine and water pump
Changed spark plugs
New Oil filter
New blower oil changed
Replaced engine oil drain hose
www.steam-brit...
Replaced cracked fresh water tank valve with [PX10] x1. Installed new air filter [47 083 01-S] x1. Installed new oil filter [12 050 01-S] x1. Replaced motor oil [79191004500] x1.5, blower oil [28G47-QT] x1, and pump oil with Hypro SAE 30 wt oil. Changed spark plugs [037551497768] x2. Cleaned Y-filter on fresh tank. Installed transfer pump with nylon braid hose [8.704-753.0] x 1 ft, clamps [620008] x2, fitting [3GMPB08X06] x1, [QD85] x1, [520104] x2, [515030] x2, [51A324] x2. Found and fixed oil leak from engine with new drain hose [20171215] x2ft, [87240270] x3, and fitting [28107L] x1. Replaced leaked out motor oil [79191004500] x1.5. 4 hours labor.
Tightened and sealed in-flow bulkhead in water box. Removed and checked ignition switch, which is physically loose but still functional. May be able to secure it using multiple washers as spacers or will need to order new one. Repaired ignition wire with eyelet [20181002] x1. Repaired choke line in engine. Replaced fuel filter near engine with [765809149915] x1 and clamps [350004] x2. Turned on unit and was able to get it running, although its rpm was slower than it should be. Appears to be an issue with belt being loose. May be able to tighten it by moving pieces, but if not will need new belt. 3 hours labor.
Items that MAY need to be ordered in:
000-010-126 x1 Belt - estimate $50.43
000-157-008 x1 Ignition switch - est. $29.13
Items the WILL need to be ordered in:
000-025-030 x1 Throttle Cable - est. ??
000-149-039 x1 Temp sender - est. ??
000-049-015 x2 1/2" Y filter replacement - est. $25.21 each
000-155-020 x2 springs for Y-filter - est. $5.25 each
Pass75-2.5-100-NIP-100 x1 Waste Tank Filter - est. $156.10
Plus additional work still needs to be done. The more we work on it, the higher the price goes!