Тёмный

2008 - 2012 Honda Accord Headlight Housing Replacement! 

Trick Shift Garage
Подписаться 35 тыс.
Просмотров 34 тыс.
50% 1

***REMINDER: Don't forget to reattach your negative battery terminal!
Welcome back everyone! In this video, Bob shows how to remove and install the headlight housing in a 2008 Honda Accord. Let us know in the comment's what you think! Thanks for watching!
Products used in this video:
Push Clips (6 Sizes) - amzn.to/3BDSC5z
Push Clips (22 Sizes!) - amzn.to/42OHoHp
Push Clips (36 Sizes!) - amzn.to/42PvjBZ
Screwdriver Set - amzn.to/3IpFwge
Car Ramps - amzn.to/3PBQsdq
Some other items to consider:
Ryobi electric ratchet - amzn.to/3uD4dPp
Ryobi Battery and Charger - amzn.to/3AKa4WM
Ratcheting Wrenches - amzn.to/3OY15pk
Socket Set (with swivel extension) - amzn.to/3Ix9SvX
Breaker bar set - amzn.to/3nT5LRD
Tool Kit - amzn.to/3acTWPN
Shop Rags - amzn.to/3e3OBv3
Shop Towels - amzn.to/3mRx0dG
Extensions - amzn.to/3cgcfEU
Loctite - amzn.to/3dyyMOe
Brake Cleaner - amzn.to/3uyr8vT
Spark Plugs Sockets - amzn.to/3zVkBgu
Spark Plug Gap Tool - amzn.to/3KUdSti
Dielectric Grease - amzn.to/3Ku6DHb
Video Gear:
DJI Osmo Mobile 3 - amzn.to/32mHI39
GoPro Hero 10 Black (basic kit) - amzn.to/3nVqSCy
GoPro Hero 10 Black (extra batteries) - amzn.to/3NVOmCp
GoPro Hero 10 Black (batteries and accessories) - amzn.to/3Rs49vs
62" Camera Tripod - amzn.to/2JNEnne
GoPro Single Suction Mount - amzn.to/3kbbzl3
GoPro Three-Arm Suction Mount - amzn.to/3k6ke8h
As an Amazon Associate, we earn from qualifying purchases.
We get commissions for purchases made through links in this post.
Disclaimer:
Trick Shift Garage hosts are DIY (Do IT Yourself), not mechanics. Due to factors beyond the control of Trick Shift Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Trick Shift Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Trick Shift Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Trick Shift Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Trick Shift Garage.

Авто/Мото

Опубликовано:

 

31 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 72   
@mjgnmsp
@mjgnmsp 11 дней назад
Completed both headlights on a 2012 Accord Sedan today with your video. It was extremely helpful and very accurate.
@TrickShiftGarage
@TrickShiftGarage 11 дней назад
Oh that's great to hear! Glad you were able to get it done! 🤟
@lbccrx1rex933
@lbccrx1rex933 8 месяцев назад
One of the best instructional videos I've seen.
@TrickShiftGarage
@TrickShiftGarage 8 месяцев назад
Thank you! And thanks for watching! 🤟
@leecowell8165
@leecowell8165 10 месяцев назад
Excellent presentation, sir. You even mentioned disconnecting the negative battery terminal. I liked the detail of those wire harness connectors as well. Very clear with good audio as well.
@TrickShiftGarage
@TrickShiftGarage 10 месяцев назад
Thanks for the kind words! And thank you for choosing our video to watch! 🤟
@tugginalong
@tugginalong 5 месяцев назад
Thanks for the video. I replaced both headlight assemblies on my wife’s car. The fixtures were easier to remove and replace than I thought they’d be based on your video but the fasteners were mostly more difficult to remove for me than you. Your video made the job easy.
@TrickShiftGarage
@TrickShiftGarage 5 месяцев назад
That's awesome man, I'm glad it helped! Thanks for watching! 🤟
@talatahmed2559
@talatahmed2559 4 месяца назад
It could not be any better. A video of a perfection class.
@TrickShiftGarage
@TrickShiftGarage 4 месяца назад
Thank you so much for the kind words! 🙏
@tchristian5530
@tchristian5530 5 месяцев назад
Great video... Much appreciated. Just a note. When I replaced mine, I removed that strip of plastic on the bumper that runs from headlamp to headlamp. Two fasteners and some clips. Made the assembly come right out without any obstruction...
@TrickShiftGarage
@TrickShiftGarage 5 месяцев назад
Good information! This should be able to help others so thanks for sharing! 🙏
@iandenby-jones6467
@iandenby-jones6467 4 месяца назад
Really helpful, I needed this in order to be able to replace the dipped beam bulb on the passenger side of a RHD car in the UK
@TrickShiftGarage
@TrickShiftGarage 4 месяца назад
I'm glad it helped! Thanks for watching and taking the time to leave a comment! 🤟
@craigdedecker4599
@craigdedecker4599 3 дня назад
Very helpful
@TrickShiftGarage
@TrickShiftGarage 3 дня назад
Thanks for watching! 🙏
@Garrxttiv
@Garrxttiv 4 месяца назад
installed my first car mod thanks to you.
@TrickShiftGarage
@TrickShiftGarage 4 месяца назад
That's great man congrats! Thanks for taking the time to comment! 🤟
@07jayman
@07jayman 11 месяцев назад
Man I love how you did that awesome
@TrickShiftGarage
@TrickShiftGarage 11 месяцев назад
Thanks for watching! 🤟
@brysonishere
@brysonishere 7 месяцев назад
thank you so much Trick, my old headlights where way to foggy i tried to clean them and it was no use. picked up some awesome headlights and some LED bulbs and its amazing its night and day with how much i can see at night. again thank you so much for this amazing walk through the details where amazing and very easy to go step by step with you!
@TrickShiftGarage
@TrickShiftGarage 7 месяцев назад
That's great, I'm glad you found it helpful! Thanks for watching and taking the time to leave a comment! We appreciate the support! 🤟
@brysonishere
@brysonishere 7 месяцев назад
@@TrickShiftGarage my pleasure man you got my sub looking forward to the new videos on the accord 8th gen!
@Vince-VA
@Vince-VA 8 месяцев назад
Thank you, very details 👍
@TrickShiftGarage
@TrickShiftGarage 8 месяцев назад
Anytime! Thanks for watching! 🤟
@tashfeenuk
@tashfeenuk 9 месяцев назад
Excellent video, thank u.
@TrickShiftGarage
@TrickShiftGarage 9 месяцев назад
Anytime! Thanks for watching! 🤟
@leenie1255
@leenie1255 2 месяца назад
great instructions!! Thanks.
@TrickShiftGarage
@TrickShiftGarage 2 месяца назад
Thanks for watching! 🤟
@nicoruizmejia6801
@nicoruizmejia6801 2 месяца назад
Great video ! Thank you 🙏🏼
@TrickShiftGarage
@TrickShiftGarage 2 месяца назад
Thanks for watching and taking the time to leave a comment! 🤟
@sandrazaragoza8468
@sandrazaragoza8468 Год назад
Video well detailed
@TrickShiftGarage
@TrickShiftGarage Год назад
Thanks for watching! 🤟
@xxxlh1
@xxxlh1 Месяц назад
You gave us a lot of details. I am gonna subscribe to your channel because of the same reason. Good luck
@TrickShiftGarage
@TrickShiftGarage Месяц назад
Thank you! 🙏
@tomfisher8951
@tomfisher8951 2 месяца назад
You are great thank you
@TrickShiftGarage
@TrickShiftGarage 2 месяца назад
Thanks for watching! 🤟
@Zaudunyani
@Zaudunyani 6 месяцев назад
In case you still want ideas about getting the headlight out - as you mention after you wrestled that guy loose, you can easily take the lower plastic bracket off with two 10mm bolts. Just remove those so it's two pieces and you'll have the flexibility to get it out without much hassle :)
@TrickShiftGarage
@TrickShiftGarage 6 месяцев назад
Yea I really wish I would have done that in the video to help show everyone how easy it is.
@mjholmes2012
@mjholmes2012 3 месяца назад
Remove the plastic piece that sits in front of the radiator in which the front of bumper is behind it. Headlight will be much easier to take out. Hope this helps😁
@TrickShiftGarage
@TrickShiftGarage 3 месяца назад
Good tip! Thanks for sharing! 🤟
@GStreezy
@GStreezy 4 месяца назад
Good video but you don't have to disconnect the battery man.
@TrickShiftGarage
@TrickShiftGarage 4 месяца назад
You're right, it's not necessary. However, it only takes a minute to remove so why not? Thanks for watching!
@GStreezy
@GStreezy 4 месяца назад
@@TrickShiftGarage I get it. I'm just not one of them guys to take a part off unless it is necessary. Of course that's just me. Just a heads up is all. Keep up the good work 💯
@swappedoutZ71
@swappedoutZ71 6 дней назад
​@@GStreezyaccidents can happen. You can be doing something unrelated to the batter and still get shocked or fry the electronics in the car if something happens. It's best to just disconnect when doing ANYYHING electrical
@GStreezy
@GStreezy 6 дней назад
@@swappedoutZ71 Not if you know what your doing you don't. Been working on cars for years bro.
@Golantheimpaler
@Golantheimpaler 8 месяцев назад
Just wanted to mention that there is a hole in the fender liner that allows you to access the two screws on the ends of the bumper so you don’t have to bother peeling it back.
@TrickShiftGarage
@TrickShiftGarage 8 месяцев назад
That's very true! You can actually see my finger poking through the hole in one of the clips. Thanks for pointing that out! 👍
@tomcistone1772
@tomcistone1772 2 месяца назад
Great video! Did you have enough push clips to complete the job with the 6 sizes pack you've linked?
@TrickShiftGarage
@TrickShiftGarage 2 месяца назад
Oh yea, I had some left over too. I even used some of the clips for my truck a couple of a weeks ago. Those clip packs are very convenient.
@moosethephysio
@moosethephysio 4 месяца назад
Can you pleases share a link for the exact clips? The clips in the description are all different sizes- not sure which one to get
@TrickShiftGarage
@TrickShiftGarage 4 месяца назад
Not every clip is the exact same size. Some fit perfectly in one hole but are too big in another. That's why a kit like the one I put in the description is so valuable. You can always go to your local Honda Dealer and get new clips from them, but that's going to be more expensive. It's up to you! Thanks for watching! 🤟
@OGMangler
@OGMangler 29 дней назад
I take it there is no light adjustment needed? Great video.
@TrickShiftGarage
@TrickShiftGarage 29 дней назад
Nope, thanks for watching!
@bluefalcon182
@bluefalcon182 2 месяца назад
Did you take steps to re-aim the headlights? If so, how?
@TrickShiftGarage
@TrickShiftGarage 2 месяца назад
Didn't need to. I did not replace the bulbs, nor did I mess with the housing like that.
@Nivlaceel78
@Nivlaceel78 2 месяца назад
Is it not possible to detach the mounting bracket off of the headlamp assembly first before trying to wiggle it out to disconnect? Seems that would be easier.
@TrickShiftGarage
@TrickShiftGarage 2 месяца назад
Yes for sure. I think I mentioned that in the video.
@billyelliot78
@billyelliot78 2 месяца назад
@@TrickShiftGarageno, you just mention how to take em off. Regardless, good to know. Also what I really appreciate about the video is the time that you took to explain how the electrical connectors are removed by showing the part that you have to push down. So many videos take that kind of thing for granted. The arrows you put in the freeze frame also help tremendously. Great attention to detail.
@serious6647
@serious6647 Месяц назад
Werd i feel confident removing the headlights now 😂
@TrickShiftGarage
@TrickShiftGarage Месяц назад
Lol let me know how it goes!
@andreaw7787
@andreaw7787 10 месяцев назад
My DS low beam seems to be stuck in the housing. I don’t wanna replace the whole piece 😢
@TrickShiftGarage
@TrickShiftGarage 10 месяцев назад
Some are very hard to turn. Try moving it back and forth in the housing and see if that helps loosen it up.
@rudybrittain634
@rudybrittain634 Год назад
How do I get those tire jacks ?
@TrickShiftGarage
@TrickShiftGarage Год назад
I have them in the description of the video!
@leecowell8165
@leecowell8165 10 месяцев назад
@@TrickShiftGarage I think he's talking about the ramps. They're not in your description.
@TrickShiftGarage
@TrickShiftGarage 10 месяцев назад
Whoops! I'll add that first thing tomorrow! Sorry for the confusion!
@TrickShiftGarage
@TrickShiftGarage 10 месяцев назад
Alright I added the ramps to the description and will also put them below! Car Ramps - amzn.to/3PBQsdq You can also get them with wheel chocks too! Car Ramps and Wheel Chocks - amzn.to/3Q0pvS1
@doubleitp
@doubleitp Год назад
Might wanna add that you need to re-attach your Negative cable to your battery terminal hehe, or she might not start lol :)
@TrickShiftGarage
@TrickShiftGarage Год назад
Lol dammit, very true! I completely forgot about that clip. Thanks for the reminder! 🤟
@doubleitp
@doubleitp Год назад
@@TrickShiftGarage hahaha you’re welcome!
Далее
2008 - 2012 Honda Accord Grille Replacement!
13:14
Просмотров 10 тыс.
вернуть Врискаса 📗 | WICSUR #shorts
00:54
How to Change a Headlight Honda Accord
11:08
Просмотров 229 тыс.
How to Replace Headlights 08-12 Honda Accord
15:37
Просмотров 523 тыс.