2008 - 2013 Toyota Highlander Radio install

Подписаться 129 тыс.

Просмотров 61 тыс.

50% 1

Parts used listed in the description below!
Watch a full tutorial as a 2010 Toyota Highlander will have a Sony double din Apple Carplay and Android Auto radio installed. This radio provides additional features including bluetooth, USB, backup camera compatibility, and an enhanced sound quality.
This video applies to Toyota Highlander models for years 2008, 2009, 2010, 2011, 2012, and 2013. This video also includes complete radio wiring and assembly, installation, and testing.
Click here to see the unboxing of the radio we used:
• Sony Apple CarPlay Rad...
Click here for the backup camera video:
• 2008 - 2013 Toyota Hig...
Pioneer bypass video: • How Bypass The Video R...
Alpine bypass video: • How To Bypass Parking ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Sony XAV-AX100 Double Din Radio: amzn.to/3e1qGgJ
*Pac (American International) TOYK989 Dash Kit: amzn.to/3qysWRD
*Metra 70-1761 Wiring Harness Adapter: amzn.to/3z8PT1y
--If you have the steering wheel control / Non JBL trim, use the
Crux SWRTY-61S: amzn.to/3iqHcK7
--If you have the steering wheel control / JBL trim, use the
Crux SWRTY-61J: amzn.to/2T1yw2m
--For just the AUX / steering wheel control harness, use the
Metra 70-8114: amzn.to/356ZIzz
*Toyota USB Flush mount adapter: amzn.to/3z87Yg7
Disclosure: As an Amazon Associate I earn from qualifying purchases

Авто/Мото

Опубликовано:

29 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@ProvoBeastAudio 2 года назад

Parts used linked in the description of the video!

@Jake-or6mq 29 дней назад

where do I find that parts list? looking for the nrs to the JBL system as I have.

@ProvoBeastAudio 28 дней назад

@@Jake-or6mq In the description of this video

@chadg6874 Год назад

Thank you so much! You made my daughter's day and mine. We found an excellent running 2011 Highlander that was perfect for her. She was very understanding to sacrifice the backup cam she wanted in her car in order to get a more mechanically sound reliable vehicle in our budget.. and now we get to install it for her! Awesome day!

@OrientEspresso Год назад

I appreciated the comments about the factor AUX connector... wasn't sure why my wiring harness had 2 connectors instead of three. No steering wheel controls, and my new radio comes with it's own AUX mini plug jack. Great video!

@gordondean6910 Год назад

My seat heater switch died! I watched an different video where i was supposed to buy several other tools. This video saved me time and money! Thanks so much! My radio has been acting up for years! Not I might replace it my self and save $$$$!

@ProvoBeastAudio Год назад

glad it helped!

@248johansson 2 года назад

That’s my Highlander!! Thanks Provo Beast. Great job on the install and I am loving the new radio!

@johnhill9909 7 месяцев назад

This video was great help on 2012 Highlander. Thanks!

@royrucker2928 Год назад

Excellent information.. Thank you for your time..

@mikeware69 8 месяцев назад

Great job

@samuelhoyle1730 Год назад

Hello! I'm planning on doing a stereo swap on my car and your video looks like it's going to be super helpful! However, my version has a backup camera and a Bluetooth mic already. Is there a way to use the original hardware that comes with the car to make the swap easier? Thanks in advance!

@alataweel8954 2 года назад

Why was the blue power antenna connected to the red wire rather than to the matching blue wire on the stereo harness?

@justinsvidz 2 месяца назад

Thank you for all your great content! I just bought a 2008 Highlander with the JBL system. It already has a Kenwood DNX693S Head unit with a maestro. I'm going to replace it as it doesn't support Android Auto. Can I reuse the maestro for integration? Or am I better off to just get a Crux 61J ? I'd like to retain the factory amp and sub. Thanks

@ionewingedangel1712 2 года назад

I'm guessing it's the same with the SE that doesn't have the navigation but a back up camera on the upper screen right?

@vboccanf 22 часа назад

Great video @ProvoBeastAudio! Is there any way to use the factory metal brackets together with the TOYK989 Dash Kit or some other dash kit? The plastic brackets that come with the TOYK989 Dash Kit are flimsy and I would much rather use the stock metals ones.

@heathercarney3845 Год назад

This same unit is in the 2010 Highlander we recently purchased, but it is not secure in the opening. It is sliding backward. I watched your video to see what holds it in place, but couldn't tell. (8:11-8:16)

@Calirangr Год назад

Hey...loved the video. Thinking about giving this upgrade a try. I did notice that the link to the Sony XAV-AX100 6.4 inches Car Play at Amazon says both 'renewed' and 'out of stock'. The alternative offered for a 2011 Highlander is a Double Din Car Stereo Radio Voice Control Apple Carplay & Android Auto, 7In HD LCD Touch Screen Bluetooth 5.2, MP5 Player with Mirror Link, Front/Backup Camera, USB/SD A/FM Audio Receiver, Subwoofer. Amazon has a model confirmation function, but 6.4 and 7" is a pretty big difference. Is this item really compatible using the stock brackets and trim pieces? BTW...I have the steering wheel controls and JBL speakers.

@Leo363615 8 месяцев назад

My after market came with the same pluses you need. The issue with kin is the rear speakers don't work because it has different connector

@justinromero7884 Год назад

I have a 2008 toyota Highlander with the back up cam and jlb speakers. Will this set up work for my truck?

@SalYourPalChencho Год назад

Can I get to the blend door motors from that angle?

@katieharper5858 2 года назад

Wondering about all the various functions, so I wish you had demoed how it all works (camera, etc.) after the install. I'm also not a huge fan of the new faceplate where the old large knobs were on the side. Are there alternate looks for that?

@ProvoBeastAudio 2 года назад

We have a camera video that walks you through that. We didn't have steering wheel volume controls, or JBL, or any factory features you are asking for. Every radio's functions will greatly vary, so a demo won't do much good for others. Again, if you want to see the backup camera, see that video, linked in the description. No, all manufactures have to create some sort of dash kit to fill the factory knob holes, a pitfall of Toyota's dash design.

@jackracherthomas7739 Год назад

Great video, very informative, will Pioneer DMH-1500NEX work with Toyota Highlander 2010?

@ProvoBeastAudio Год назад

Yes, any standard double din will fit the parts used.

@lciummo1 10 месяцев назад

And you have to get the correct after market bracket kit.

@captainover-tighten6729 15 дней назад

Hi. I have the mid trim level with steering wheel controls and XM satellite radio. Will the satellite work with this setup? Thanks

@GaryWold 2 месяца назад

Do you sell a kit to replace the factorty stereo for (2010) Highlander Limited Hybird w/JBL and Navigation. I'd love a Kenwood or Atoto with GPS and keeping all the steering wheel controls. I dealy even OBD 2 diagnostics would be a bonus.

@whoispradeep 9 месяцев назад

Can’t we shift the gear without turning ignition on ? Won’t it drain the battery until we finish the job?

@Steven-fh7gy Год назад

I have a 3td plug on my car six wires come into & it look s like about a 12 pin plug. do I need to order something else?

@timmyireland1 2 года назад

get an android 10 head unit with the OEM-style look, which can also retain the use of the existing dials. It looks way better than this island-in-the-sea approach i.e. the centre head unit surrounded by boring black fascia.

@311Hanel 2 года назад

This looks so ugly, I've installed a 10.1 in with Apple car play and android auto and wifi ready, tether from my phone to watch videos and it looks way better than this... it was basically plug and play,

@pappascw 2 года назад

@@311Hanel What model did you got with. Looking at the android 10 units myself. Have a non jbl 2010 highlander

@metsrock15 2 года назад

@@pappascw no response gotta love it, I've looked into the 10.1 units. They're all made in China, like most things and the shipping is about 4-6 weeks for the Joying and is $400-600. There are other ones with slower hardware for $100-200 as well that are listed on Amazon. I like the idea of having the Joying because of the have firmware updates for it and the flush mount but I'm not dropping that much money on a headunit for 3.7 inches larger then the current headunit im gonna with and waiting 6 weeks for it.

@metsrock15 2 года назад

Which one did you buy? Glad you're able to tell us that a double din radio that's 6-7 inches doesn't fit as nice in a space that can hold a 10.1 radio. What a grand observation. Now how about you tell everybody which one you bought instead so maybe others can decide on what headunit they want in their car. Not to mention which one specifically comes with retaining the existing knobs, all the ones i've seen either have new knobs on the top of the unit, no knobs at all or faux knobs that are just plastic molds. I mean no hate btw, I've just been researching what to do for my 2012 highlander and there is limited info on the 10.1 units

@ministeriosummitespanoldis2237 Год назад

@@311Hanel where did you get your unit? I own a highlander 2012 and I am looking for a unit with car play and mirror . Thanks

@dylanwilliams1041 21 день назад

I have a factory back up camera. How would I wire it?

@omaymaali9899 Год назад

❤❤❤❤❤❤

@chadg6874 Год назад

I also have a question... The radio you installed in this video is discontinued, but if I used a newer model Sony double din, which one would you recommend that could be installed following the steps in your video with the same other parts?

@VirtualWoodshed Год назад

I had the same question. Looks like there is a boss audio double DIN touchscreen on Crutchfield for $199. It got great reviews so I think I’m gonna go that route.

@chadg6874 Год назад

@@VirtualWoodshed I'll check it out as well. What's the model number?

@user-iy2fm8tp2l Год назад

I would like to replace my dead 2012 Highlander non JBL radio with a Kenwood dpx505bt cd/radio. I have steering control and the top mounted backup camera. My question is what wiring harness will work with this to retain all functions?

@lciummo1 10 месяцев назад

Goto Crutchfield - plug it in and they will tell you what you need.

@RebeccaSearch-qf4zy 4 месяца назад

Did this car have an amp In it

@Leo363615 4 месяца назад

I couldn't find the rear speaker connector 😢😢

@kimyattac7351 Год назад

I have question maybe you can help. I have 2011 hybrid limited. I bought a pioneer from Best Buy and they tried to install but my hazard control panel had multiple buttons and they said I need a different one like what’s in this car. Any idea of what you might do? I’m not convinced they know what their doing bc it was a shot show from the beginning.

@mhornqu1 Год назад

Same problem here - 2010 with the navigation. The dash panel is different. I am trying to order a non-nav hazard button about $60 on ebay. Also the crux harness he mentions doesn't seemt to fit the car with the nav and backup camera. ugh. what a pain. thanks toyota!

@michaelr9292 6 месяцев назад

Hi PB, I am trying to connect a XAV-AX1000 to a 2013 Kluger. Bit confused with some of the wires on the harnesses. You able to assist if I send some pics and further discussion? Mike (Australia)

@ProvoBeastAudio 6 месяцев назад

Shoot me a message on facebook or instagram and I can help out.

@mhornqu1 Год назад

Having trouble - I have 2010 highlander with JBL plus Navigation. Bought the Crux SWRTY-61J - only the "no-video" harness seems to fit. Any ideas? This radio is apparently impossible to replace? Toyota part # 86120-0E250. What a pain.

@ProvoBeastAudio Год назад

Send us a message on Facebook and we can help!