2008 lifted Ford explorer 35"s 3"lift 20"wheels(BTFabrication upper control arms) 4.6 3valve 

Thanks much appreciated good luck with your build

Thanks, they are really the turn radius is on a dime doesn't weigh to much with the wider tires nd spacers almost perfect for the sand but I am losing cv boots even though I can't rule out my neighbor cutting them considering he has punctured tires on other trucks cut trailer lights off my truck that was connected to my trailer and I'm 99% sure there is something in my fuel tank. so right now feels like I'm driving on rectangled tires or unbalanced drive line and it runs lean at the top of the gears causing misfires it still runs though :) 2900 miles or 128 hours without a fix I'm put up video of the carnage and how it happened soon thanks for watching:)

Rancho and other make struts for the explorer but I just used all stock struts only because with or without them you are going to be limited by the travel even with the btf fabrication uppers on the front I been debating on chopping the towers and relocating uppers and struts but it's hard to find time theses days with work and family

Yeah I put it together for video wasn't to far from the house alignment and some under coat is getting done atm i was wondering if someone caught that :)

We caught it.

You need btf control arms

@@SuPerPiTs I was looking for it, check that and I saw your video and it was very helpful, you have a reason I will do it...

Sway bar links taking a sht so I just used the ones from the back on the front and they should be rubber so they make less noise other than that it drives as good as it did new you will probably want to disable the rsc because it won't exit or enter the off ramps over 35 if not rsc won't let it also the stock cv axles seem a little short on the front so I bought the longest ones I could find and no issues yet good luck with the build you should be happy with it its a daily driver still today 🤙

@@SuPerPiTs could you elaborate on the RSC? Why would it not allow you to accelerate?

@@Bowdinky itthe RSC or roll stability control will sense the lean and and not let you pedal the throttle until you are out of the lean and level around 30mph usually is when it would apply itself. I have another video shows how to permanently disable it. You will not have traction control awd and rsc if you do it but 4 high and 4 low still works as normal

Ok that's cool I'm check them out I did find a longer set but not as beefy need something that can stretch more than 28"that's what I need or anyone who lifts one these this tall but they are only longer by an inch thanks for the info:)

Idk they are blacked out or smoked other than that still stock look

The control arms may clear but the cv axles and more won't be long enough and the rear cv axle goes through the frame that could be an issue as well the 3" lift with @ 1" body lift would be a more reliable lift

btffabrication.com/

Thanks tires on it are M/T thunderer they are loud and super soft not the best street tire but they look good I put radar renegades on it this year 35/12.50 /20 and they are a much better tire for suv they are so thick there's basically no roll around corners and they kind of look like swampers on tread side.

From

8 weeks

They was worth the wait drives like a factory ride on the road now and it can actually be aligned with them. if you don't wanna keep replacing tires and uca's get them for sure

What? Like add another lift on top of the lift?

@@SuPerPiTs yes like a smaller one on top of the 3 inch one

The cv axles wouldn't drop out enough if you could find longer cv axles possibly but then you would have another control arm and alignment issues I'm having troubles atm with taking out the boots on the front Rancho does make a coil over that fits and adds height also but I haven't used them because I can't find a longer cv axle then stock. Lmk if you find them :)

Carpartsparadise is where I got them it's ebay store

@@SuPerPiTs thanks bro appreciate it, What size is the front I never seen anything bigger than 3"..

It's a 3" same as back I measured them because your not the 1st to ask why it's taller :)

@@SuPerPiTs yea it's weird, Anyway thanks bro... Nice X..

Thanks good luck with your build :) 🤙