2009-2014 Ford f150 fuel pump control module replacement (no start) (intermittent starting) P0627 

Thank you so much. I was able to check and verify power at the plug. So bought a new fuel pump module. Popped it in and started right up! Saved me a tow and a shop bill. Thanks again.

Very excellent work on this video. I’m very happy you shared it cause there’s not a lot of information on testing them.

My Ford F150 5.0L truck will start and run for about ten minutes then shut off and no re start because not getting fuel. I let it sit overnight and then it will start perfectly fine and do the same thing.

Great job explaining your process 👍😁

You saved the day my man. I can't thank you enough for sharing this. You saved me 200 bucks. God bless!

Great Video! I have a 2012 f350 dump truck and I think the fuel pump module went bad. I seen the code on my Scan tool delete the code. mins later after doing that truck won’t start. Crank strong? Can I spray starting fluid into intake hose to see if it will fire up?

Nice work

Replacing the AC compressor and the orifice

How did you check the power coming out of the module?

Thanks for the informative vid! Appreciate the schematics and explanations, good job!

I changed fuel pump on my 09 f150 xlt 5.4 started and died now i got crank no start it sounds like im getting power to the pump could it be my pump module?

2014 still 150 Same problem ges what not the gas pump it was a starter going bad Ya the starter controls the gas pump ,, saved me 800 dollars by a good mechanic

Awesome video! This was the fix for mine 2013 f150 with only 80k miles! Mine had the exact same symptoms as in this video. Went straight to the parts store and they had ot in stock. Took me about 20 minutes to change it out and it started right up! Way to go saving me tons of time and money! Thanks good Sir

Excellent video. Well explained and to the point. Thank you

It's gonna be gas it's not diesel correct

Thanks for the video without any further diagnoses I replaced the module and my truck started right up.

This video is the only one on the entire internet that has helped me precisely with my situation. Literally, this morning I just bought a new fuel pump, and tomorrow I was going to install it. But after watching this video just now, I'm looking for this control module to replace it to see if it's the cause of the problem. Thank You! Have Nice day. Greetings from Ags, México.

Excellent !

27 needs a 20 amp in it

I wish I had your skill of understanding the mysterious art of diagnosing issues with a multi-meter. You're brilliant. I will be paying $300 for this work at the Ford dealership later today. Seems a bit steep after watching this. You make it look easy but it's not. Great video.

GM's need to have the vin programmed to the replacement, Ford kept it simple, remove and replace.

Super 👍🏻👍🏻 thank you for sharing this video

So would u hear ur pump turn on when u turned the key before u replaced it?

He did not comment if it was a no crank or no start if intermittent okay

Thank you sir. I am gonna install tomorrow and see if this fixes it. Also fantastic for adding the part # into the video. Fr so helpfull

My fuse #27 is melted. Cranks but no start. I’ll try this module.

Was it cranking at all either or just not starting?