2014 - 2021 Toyota Tundra LED Conversion for the Rear & Interior | HR Tested 

Just installed these taillight and front turn signal bulbs. VERY bright. As for the taillight removal, I broke the lens housing using the method described on the first lens I took off. On the second one, after pulling the lower fastener straight away from the body, I used a pry tool on the upper fastener. Clean disengagement. Be sure and pre drill the holes for the relay. The screws are crap. Thanks for the video though! Life saver.

Installed the interior LED kit in my 2017 Tundra, huge difference to the interior brightness. Highly recommend this upgrade. This video was super helpful ❤

I would be putting a 7443 switchback bulb in that reverse housing and do some wiring so I can have an amber rear turn signal.

Which bulb am I supposed to get for a 2021 tundra turn signal bulb? I need a resistor too, what would be best?

First of all, the videos you guys put are great help installing LED for first time. and question. I have 2021 Tundra, and bought "2014-2020 TOYOTA TUNDRA LED REAR TURN SIGNAL UPGRADE." I was wondering why it didn't say 2021, but went for It anyways. Turns out, 2021 has LED rear turn signals from the factory. Is it ok to just install GTR T15 without register? or should I add the register as well?

That was a great complete demonstration of putting all the bulbs in I have one question does anyone sell a complete set of bulbs and how much would it cost?

First of all great video. I just recently installed the Morimoto headlamps and fog lamp assembles on my wifes sequoia and she loves it. But one thing I noticed is that If the lense is already red why do you have to use a red LED? The stock bulbs were clear so would using a white LED would make the stop lights brighter and still red?

0:52 my 2017 Tundra uses a 4157NAK. Are they interchangeable with 7443?

Quick question, in most of your prior videos, you guys said that the Carbide 2.0 bulbs don't need a resistor for turn signals. So why do the rear signals need resistors when the front does not?

where can we find the Carbide 2.0 rear brake lights that you refrenced @ 12:22 ? cannot seem to find it on your website as being listed for the 2021 Tundra...

Ok i have a question y u guys never do Nissan rouge sport or the regular rouge i have a 2020 I would to see what u guys have for that type of vehicle u guys can get at one to do ?????

The cargo lights the two white ones, you dont state what size they are. you say the same as the ones in the inside. Which ones might those be?

Which resistor should I purchase for the rear signal on a 2019 Tundra? 25 W 60 HM, 50W 30 HM, 50W 60 HM? I've added a pair of Carbide 2.0 921 red bulbs for my signal/blinkers on a Tundra 2019. I am now trying to figure out the proper resistor to purchase and am having trouble figuring out which resistor is appropriate.

What is the socket size for the reverse lights?

What would you recommend for us folks in the northeast most leds seem to have issues in the cold?

Where can we purchase these GTR Lighting ULTRA resistors with these connections (09:26)? I'm not able to locate them on your website.