2015-16 Hyundai Genesis Sedan G80 Headlight Bulb Replacement (No Bumper Removal) 

hyundai engineers must be drunk when they designed this part of the car.

Is it necessary to remove all of the pieces on the driver's side. Appears as though it can be completed without

What a trash design. Never buying a Hyundai

I wanted to upgrade mine after I saw your video. I have a 2015 Hyundai Genesis 3.8 BUT my original bulb is a OSRAM H11 and not compatible with D1S. I'm returning the bulb but man it would've been nice to have the D1S. commenting so someone does not make same mistake as me

Thank you. You saved my $500 on my drivers side headlight after I bought a Phillips bulb. I used your technique with four minor tweaks. First I did not need to remove the shroud for the drivers side replacement. The second tweak I took off the bulb harness before moving by placing a standard head screwdriver between the old bulb base and the connector and gently twisting the screwdriver. Third I stuffed the lower light housing with about 8 paper towels so that if the screw fell it would remain accessible. Lastly, I cheated a little. I removed the more accessible screw on the bracket and then gently bent the bracket back just enough to remove the bulb. Thanks again for providing this insight!

awesome video. A headlight went out on my G80 the day before I was headed to my local Genesis dealer for a minor defroster issue and thought I would let them change the bulb. The owners manual said " spin off the access panel, remover the bracket, and pull the bulb carefully out". It didn't look very accessible, so i figured there was a trick. I asked the Genesis Parts guys if I could watch the mechanic school me on pulling the bracket and the said "sure". 5 minutes later he comes out and said, before Start, I want you to know that GENESIS wants $400 for the bulb plus the labor for the shroud and bumper removal. I about choked. Brought the car home and plan on using your wheel well access technique when I get the bulbs shipped for $70. Thanks for the tips!

I've got an 18 g80 sport rwd. Basically the same car as yours. Thanks for making these great guides, looking forward to more!

My blub went do I just need the blub or do I need to buy the ballast as well

I’m thinking about doing this myself. My drivers side headlight blew and I was told $340 for 1 bulb and another $300 for labor. So here I am. Thank you for this video. Any extra advice?

Can you put the link of where you purchased the replacement bulb?

Yes… you had fo investigate that model. But good job, since you didn’t break anything that your video showed.

My 1989 Prelude: To replace the headlight. Flip up lights. Take off cover by removing screws, Unplug bulb. Repeat steps in reverse order. Today's vehicles: To replace the headlight, disassemble vehicle down to the frame. If it wasn't for videos like this I'd probably never attempt this. Thx!

2015 50 Genesis. Sad that my passenger light went out and they quoted me about $80.00 per side and ended up calling me to say it's $400.00 for one side and I had it done. I needed to get the light because I was driving out of town the next day. I will replace the other one when I return and the bulbs were only $80.00.

So the led strip in my head lights seems pretty dim is there a bulb I can change that might make them brighter?

I was told that I have to replace the whole headlight assembly when my headlight went out

Nicely done. Good job man