The vehicle information display is located between the speedometer and tachometer. Operation information for the following systems, if so equipped, is shown on the display:
● Automatic transmission position indicator
● All-Wheel Drive information
● Cruise Control and Intelligent Cruise Control (ICC)
● Active Lane Control
● Lane Departure Warning (LDW) and Lane Departure Prevention (LDP) systems
● Blind Spot Warning (BSW), Blind Spot Intervention® (BSI) and Back-Up Collision Intervention (BCI) systems
● Distance Control Assist (DCA) system
● Forward emergency braking system
● Predictive forward collision warning system
● Active Trace Control
● Intelligent Key operation, and
● Various warnings and indicators.
One of the vehicle information display modes is the Trip Computer. Press THESE buttons on the right side of the steering wheel to cycle through the following modes, if so equipped:
● Current and Average Fuel Consumption
● Average Speed
● Elapsed Time and Trip Odometer
● Distance to Empty
● Route Guidance for the Navigation System
● Audio Information
● Driving Aids
● Chassis Control
● Tire Pressure, and
● Warnings, if there are any.
Press and hold either of THESE switches on the steering wheel for more than one second to reset the Average Fuel Consumption, Average Speed or Elapsed Time modes.
The odometer and twin trip odometer are displayed when the ignition switch is in the ON position.
The odometer records the total distance the vehicle has been driven, while the twin trip odometer records the distance of two individual trips. Push the TRIP RESET switch on the left side of the instrument panel to change the display from trip A, to trip B, and back again. Push and hold the switch for more than one second to reset the selected odometer.
Consult your Owner's Manual for further details or visit INFINITI's Owner's at bit.ly/2OgdfeU
Discover more about INFINITI at bit.ly/2OaB47N
Follow INFINITI on Instagram: / infinitiusa
Like us on Facebook: / infiniti
Follow INFINITI on Twitter: / infinitiusa
22 окт 2014
