2017 Mazda 6 Caliper and Rotor upgrade to 2016-2021 Mazda CX9 Calipers | 2017 Mazda 6 Mods

Подписаться 3,1 тыс.

Просмотров 2,5 тыс.

50% 1

Xavier made an upgrade to his 2017 Mazda 6 by installing CX-9 calipers, which feature dual pistons, a significant improvement over the single-piston OEM brakes. In addition to the caliper upgrade, we also enhanced the braking system by installing rotors that are approximately one inch larger. Enjoy the enhanced performance!
➡️➡️ lnk.bio/p1zaro MODLIST WITH LINKS ⬅️⬅️

Авто/Мото

Опубликовано:

19 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@cvp0917 4 месяца назад

I did this upgrade on my 2014 and absolutely love the results. Everything bolted right up and fit with the factory 19" wheels. Brake feeling is much improved and brake power is crazy good. Definitely recommend it.

@P1zaro 4 месяца назад

It’s definitely an awesome upgrade. Don’t forget to get a new spare. The oem spare doesn’t fit over the Caliper.. we found out the hard way lol

@cvp0917 4 месяца назад

@@P1zaro Did you get a spare from a cx9?

@P1zaro 4 месяца назад

Picked up a used 19 inch oem wheel for $100

@Cloudead88 2 месяца назад

Thanks for sharing some good info in this vid. I'll be seeing if I can get a hold of some cx-9 calipers for myself now lol.

@SamLoki 5 месяцев назад

That is such a beautiful Mazda 6 holy moly bro

@whitelion6s459 10 месяцев назад

Nice Video guys.

@miguelarriola6519 4 месяца назад

* Mods his Mazda * * Mazda oem parts breaks* * is surprised * lol

@kensg 8 дней назад

Beautiful job..that Red is wicked 😅

@ryanverplank8212 10 месяцев назад

Look forward to seeing more of Xavier's build! Does he have the MV tuning rear defuser?

@P1zaro 10 месяцев назад

He does !!

@uncleshrek32 10 месяцев назад

🔥 🔥 🔥

@rrodriguez0130 10 месяцев назад

nice video where in Florida do you live? I have a Mazda 6 too!

@xnawaf8864 3 месяца назад

Can I upgrade the fronts rotor to cx-9 rotors without change the brake calipers? I have a Mazda 6 2020 NA

@sirplus3809 6 месяцев назад

😂@ 1.30 on point 😂

@rickyse3p 10 месяцев назад

I recently did front rotors and pads so I'm a little bit burnt that I'm just now finding out about the compatibility between the 6 and CX-9.. but I need to do front wheel bearings now I'm pretty sure and have to take everything apart so I might be considering doing this. That said, I am due for rear rotors and rear pads.. any clue if the CX-9 rear calipers also being electronic would work on the 6?

@kbain5200 3 месяца назад

Headlights id?

@Staarkyy 10 месяцев назад

Where did you get the front grill from? Also any recommendations on where to start? I've been wanting to work on my 2017 Mazda 6

@P1zaro 10 месяцев назад

In a few days I’m releasing an in depth video of his car with links to all of the modifications.

@kimberlyryan7799 10 месяцев назад

I’m his mother now (referring to the Mazda).

@ContasYT 10 месяцев назад

Is there any guide you guys found or how did you know the CX-9 callipers would work and this might be a dumb questions but couldn't you put the old front callipers in the rear and have an upgrade there too?

@P1zaro 10 месяцев назад

Rear is electronic so it wouldn’t be compatible

@P1zaro 10 месяцев назад

There was a forum showing a few people doing this

@puddleduckist 7 месяцев назад

Could u use the cx9 dustshields for the front as well? I have a 17 6 and would consider this swap. How are they working now? Improvement?? I have the mv tuning rear diffuser on my 6 as well, recently added some rotiform rse's and continental dws06 tires as well. Sweet mazda!!!

@cvp0917 5 месяцев назад

Swapping out the dust shield means you have to pull the wheel bearing and hub off which can be a huge pita. Took me about 2 hours to get my old bearing and hub out when I changed mine. Something to think about.

@OldisNewAgain 3 месяца назад

@@cvp0917 I did the same upgrade. Super Easy and the factory dust shields on the 2017 Mazda 6 fit nicely over the cx-9 rotors and calipers. I ordered my calipers off of amazon for $103. Big thanks and super easy. Just remember if the Brake Bleed screw is not on the top of the caliper its on the wrong side.

@mcmittens8211 10 месяцев назад

by any chance do you know that car's wheel specs? looking to finally upgrade my wheels from stock. Don't know how wide and how low my offset can go. Please HELLLP lol

@P1zaro 10 месяцев назад

I do not but we are making a walk around video soon showing off his car and specifications including the wheel specs