2020 CRF 110 PIT BIKE BUILD - ENTIRE SERIES

Подписаться 3 тыс.

Просмотров 97 тыс.

50% 1

Full build video on my 2020 CRF110 project. When I started my project I had questions about a few mods that I couldn't find answers too, so I covered everything I couldn't find throughout this video. If you're looking for the timelapse of teardown/build and final reveal that video will be linked below:
• 2020 CRF110 PIT BIKE B...
Tri-County - tricountyhonda...
Nick Fratz-Orr Shout Out -- / nfomx144
POWDERCOATING - / mountainstatepowdercoa...
Helpful videos I used:
Building Forks: • BUILDING MY CRAZY CRF1...
BBR Rear Spring Change: • BBR CRF110 Shock Sprin...
FULL PARTS LIST:
Exhaust - amzn.to/3b3X66L
Bars - amzn.to/34zNCO3
Red Bar Pad - bit.ly/2yaSP2C
Grips - amzn.to/2KbxCst
Throttle Cable - bit.ly/3caGM4g
Full Size Throttle Tube - bit.ly/2Ry2TK6
Shorty Front Brake Lever - bit.ly/3b4km4r
Extended Brake Cable - bit.ly/2x532O0
Fork Springs - bit.ly/3bfIOQk
Damping Rods - bit.ly/2yehWBF
Rear Shock Spring - amzn.to/2V3G8Qw
HD Spokes (front) - bit.ly/3a25bHU
HD Spokes (rear) - bit.ly/39WN0Dm
Rim Locks - amzn.to/3a2Znhd
UpSweep Peg Mount - bit.ly/39YfT1W
Skid Plate - bit.ly/3cauFnM
Shifter - bit.ly/2V2BG4p
Chain - amzn.to/2wDTn0Q
Rear Sprocket - bit.ly/3a25kLs
Red Billet Engine Plugs - bit.ly/2VlL5mx
Steering Stem Bearings - bit.ly/3cbymcP
Fork Seal Kit - bit.ly/3aZjkGW
Camera Gear:
A Camera: amzn.to/2JoCv12 (used in this video)
B Camera: amzn.to/2JoCDxy (used in this video)
Vlog Camera 1: amzn.to/2PlXrtE (used in this video)
Vlog Camera 2: amzn.to/2qJCNJr
Wireless Mic - amzn.to/380dItR (used in this video)
Drone: amzn.to/32JjHRT
GoPro7: amzn.to/2JkByXC (used in this video)
GoPro8: amzn.to/2PmdF5K (used in this video)
Metabones Adapter: amzn.to/2p5it52
My Favorite Lens: amzn.to/367A6Sg (used in this video)
16-35mm Lens: amzn.to/2JoXPnd (used in this video)
24-70mm Lens: amzn.to/2JnlVyI
70-200mm Lens: amzn.to/2pf5yxk
14mm Lens: amzn.to/31O4IF0
35mm Lens: amzn.to/2qNTZ0F
85mm Lens: amzn.to/367pyCF
Tripod: amzn.to/2pWhW5u
Video Head: amzn.to/2WgqVKL
Drone/Gear Backpack: amzn.to/2MMjAQ2
Camera Straps: amzn.to/2NhRk6I
www.loganmarksmedia.com

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 104

@sojaracing260 4 года назад

This has to be one of the most helpful AND entertaining video on building a 110 thank you so much. Definitely am subscribed

@loganmarksmedia 4 года назад

Soja_427 much appreciated! I try to sneak in some Easter eggs when I can lol

@randymoreland4344 4 года назад

Hi Logan, thank you for putting in a good word/review for Mnt St. Powder Coating. It is very much appreciated. Looks to be a top notch build and very informative video. Cant wait to see it completed!

@loganmarksmedia 4 года назад

Randy Moreland absolutely! Super excited with how everything came out - I have more headed your way very soon!

@Jazsft 3 года назад

Awesome bike man 🤩 Good to see I’m not the only one who sits down to do everything hehe

@lancairw867 4 года назад

Impressed with the details and time you put into the 110 👍🏼. I’m a Dad with kids riders here. We have a KLX 110, 17CRF 110 and a 2019 CRF 125. I’m 6’0” and have rode all bikes. Love the 110 but to me a fun pit bike, the perfect size for teen/adult would be the Honda 125 ( not to small not to big and only a few lbs heavier ).? I know it has a clutch but can handle more weight, much more comfortable and has the bigger motor. ? Edit: I have a KTM 250 for myself but enjoy playing around with the smaller bikes.

@loganmarksmedia 4 года назад

Lancair W I have a XR100 from when I was a kid that’s on my to build list. It’s basically what the CRF125 replaced and I agree on the most fun. They are def a little more comfortable - but once you build the 110’s up a little that little compact ripper is hard to not put a smile on your face lol. Make sure you check back soon, I have a KLX110 I’m building, 3 50’s, the XR100 and then an 03 CR250 and an 02 CR125. Lots of winter projects coming up!

@izackmayfield7690 4 года назад

most helpful video and thank you for putting the links in your bio

@ch33ch4 2 года назад

My stunt bike matches perfectly dope colors👍 anyway crazy good video!

@caleb7194 3 года назад

Bro those wheels are sick.

@cwbfmxer 3 года назад

11:25 when you say “hey Siri” activated Siri on MY phone! Thought I was trippin and rewinds and it did it again! 😂 Anyway, super helpful video! Thanks for all the info!

@chrismorgan1366 4 года назад

The Honda 110s so dope 👌

@loganmarksmedia 4 года назад

This might be one of the only bikes I’ve ever actually really liked the stock graphics too.

@chrismorgan1366 4 года назад

Logan Marks right the whole bike looks really good in General

@reeseraymond2016 4 года назад

i like how nicks playing cashmere by led zepplin good taste

@zac0912 3 года назад

My 10 year old has this bike and loves it, lol. I really wish it had a clutch though. Thats the one thing i dont care for, wish they made it an option. Cant wait to move him up to a 125 and get him working a clutch, he just has to get taller.

@Chumbucketsecret 2 года назад

There have been clutch kits since 2014

@morromk7538 3 года назад

God bless ya Logan homey

@JacobsLifestyleWreckedByNature 3 года назад

Help me rebuild my 110. That thing clean

@james_holm 4 года назад

Badass Outro!

@ForrestJones214 4 года назад

Did you clean the carb? 😁

@loganmarksmedia 4 года назад

new jets and fresh blinker fluid

@rayv882 3 года назад

Nice job with the video and the bike, did you have an issue with your throttle tube staying stuck open after installing those bars and longer throttle tube?

@loganmarksmedia 3 года назад

no. that's what the extended cables are for

@squarecrawler9551 4 года назад

Noticed your part number for rear BBR spring was for 18’ and older. Did it fit your 20’ just fine? Thanks just curious because the 1205’s are all out of stock

@loganmarksmedia 4 года назад

Walleye Willy no they are different sizes! Thanks for catching that I must I’m have grabbed the wrong link, not surprising I have a ton of stuff on that list lol

@danielbowering9354 4 года назад

Awesome video mate love the build looks like you have a pro circuit pipe in the reveal ? Did you change out the other?

@loganmarksmedia 4 года назад

Daniel Bowering nope. Just put pro circuit decals on that pipe.

@danielbowering9354 4 года назад

Logan Marks okay that’s where you got me lol 😉 and awesome build Logan keep up the top work mate 👍😎

@colehicks8117 4 года назад

Awesome video. Why not blue the pipe?

@AUGH967 4 года назад

hey im just saying no hate but you should keep it always stock but its nicer when you have aftermarket stuff but aftermarket stuff makes the bike ware out faster

@pillaryclinton6187 3 года назад

It was kinda hard to understand you maybe English isn't your first language lol. However no you shouldn't keep it stock it's boring and doesn't show your unique style and flavor. Plus most the mods are to make it ride better and more comfortable for him. Nothing is going to wear it out faster then normal unless he starts modding the motor significantly and even then so long as it's done right and maintained well he shouldn't have any issues. Maintenance is key to anything running for a long time. Only thing stock is good for is a warranty I don't think he's worried about that he ready for fun.

@AUGH967 3 года назад

@@pillaryclinton6187 English is my main

@braxtonsykes3534 3 года назад

Can this bike pop a wheelie in 1st gear if you just sat down and full throttle

@HONDAracing22hca 2 года назад

Hold up piranha exhaust works on the 2019+??

@trevorvoss6487 2 года назад

Where did you find the swing arm bushings

@I53-624 4 года назад

would you recommend putting inverted race forks on my 110 I’m thinking about it instead of bbs

@loganmarksmedia 4 года назад

AldenG I would like to swap mine too but the there are a few issues with doing it. The main issue will be finding a set of triple clamps that mount up without a custom steering stem. The issue after that is that you’ll most likely need an extended swingarm. BBR is the only company that makes them that I know of and they are backordered for months to get one.

@overzxne1304 3 года назад

Was it flat packed

@justinnoss5900 3 года назад

I don’t think your part number for the extended brake cable is correct. I’ve ordered 2 (45450-GN1-A21) and both are identical length as stock and too short for extended bars and bbr triple clamp. Can you double check what you used. All crf125 are showing hydraulic front brakes from what I can see....?

@loganmarksmedia 3 года назад

That’s the part # for a front brake cable off of a CRF80, it’s what I used and it was definitely longer than stock - I don’t have aftermarket triple clamps though, just stock ones that are powdercoated. You’re adding another inch or more with those. Try the cable off of a CRF100 (45450-KN4-A11) or the CRF110 +5 cables are in stock lots of places. (www.faster-minis.com/products/brake-cable-honda-bbr-crf-110?variant=8434137923626&gclid=CjwKCAjwx6WDBhBQEiwA_dP8rQOtgO7NBPcJfLCqu2JNDLsrpxypxH0tui4Z6-VSNL0Z5GTs4zNhuRoCgfQQAvD_BwE)

@justinnoss5900 3 года назад

@@loganmarksmedia thanks I’ll try the bbr +5” cable. Great video btw!

@dirtbiketelevision6865 2 года назад

What kind of bar bend is that

@scottwhitehead4278 2 года назад

Hey did you have any wiggle on the “red”shock extender?

@gdrozd555 4 года назад

Is it me or is the wheel still crooked at 6:40

@carsonjohnson1845 3 года назад

Just you

@gdrozd555 3 года назад

@@carsonjohnson1845 haha. Its fcked. Good job

@tannerwestrick2618 4 года назад

Did you think you’ll need to add a spacer to the rear shock due to the front sitting higher?

@loganmarksmedia 4 года назад

Tanner Westrick yes. I have one ordered it just wasn’t here in time for the video.

@tannerwestrick2618 4 года назад

Very fast response thank you. what size did you end up getting for the rear?

@loganmarksmedia 4 года назад

@@tannerwestrick2618 yea man. On lockdown in Maryland so I'm on RU-vid ALOT lol - tboltusa.com/store/pit-bike-rear-shock-extender-p-1067.html

@tannerwestrick2618 4 года назад

Logan Marks awesome thank you just subbed to you!

@turbobino6496 4 года назад

@@loganmarksmedia Hi, just checking, would these spacer on the link fit the on a 2020 CRF 110? It says crf 50 or klx 110 on the website, thanks for clearing that up and love your videos!!

@aeror115 4 года назад

Is it necessary to buy extended cables for the wider pro taper handlebar on a stock crf110 ? Cheers mate

@LaneSplitting247 3 года назад

Hey man we have a little track in Morgantown, wanna come rip?

@loganmarksmedia 3 года назад

NICE! My parents have a house out there, weather probably won’t be great for awhile - but I’ll def come rip when it’s not freezing outside lol

@SookaMaDeek 4 года назад

Your killing me I need to hear it!!!!!😭😭

@loganmarksmedia 4 года назад

bryan loleas check the video on my channel about installing the exhaust - there is a clip at the end.

@austintradup6446 4 года назад

What size socket is the triple clamp top middle bolt

@loganmarksmedia 4 года назад

30mm

@jeffreyford3076 3 года назад

I want it

@DizTV 3 года назад

The exhaust needs unbolted just to remove the rear fender, doesn’t it?

@corz758 3 года назад

@DizTV 3 года назад

@@corz758 Clearly you don’t have one

@gsrport1 4 года назад

how in the world did u get the swing arm bearings out ?

@loganmarksmedia 4 года назад

Drew Drew my powdercoat guy actually took them out for me with a press! I took the same style ones out of my 50 though - use a vise and two sockets. One that’s the size of the bushing and then one on the other end that’s large enough for the bearing to push into. They’re a pain to get out but without a hydraulic press the vise method is by far the easiest!

@gsrport1 4 года назад

Logan Marks u the man thx bro just hit u up on ig same question thx dude

@ponderosapines 4 года назад

Let's race

@loganmarksmedia 4 года назад

that KTM don't want none of this monster lol

@fazecleanup2578 3 года назад

Can u build my 1990 suzuki 250r 2 stroke

@jayverstraeten4670 3 года назад

Which bar bend did you go with

@VDUB26 4 года назад

Hey Logan, are out interested in selling anyof the stock parts?

@loganmarksmedia 4 года назад

Yea, shoot me a message on IG or you can email - accounting@loganmarksmedia.com

@kaysonosborn5247 4 года назад

If ur still looking for parts I got a couple things I’d sell

@VDUB26 4 года назад

Kayson Osborn All I have now are a klx 110 and a yamaha 110. Do you have any parts that will fit either of them?

@alessandropezzella4505 4 года назад

Top

@mackelook0633 3 года назад

Were did you find those rims?

@billywardynski9113 4 года назад

with the pipe and sliencer why dint you just geta yoshimura exhaust or fmf??

@loganmarksmedia 4 года назад

Not a fan of how they look. I mainly did it because I was holding out to see what other options come out. I would say as of now the Bill’s pipe is probably the best looking one for the 19+, but I’ve been running that piranha for months now and have had no issues.

@thomassylvestro9041 4 года назад

Awesome job, what tires did you use. Are they the stock tires

@loganmarksmedia 4 года назад

yes. leaving the stock ones on for now. May as well wear them out before I get a new set.

@carsonjohnson1845 4 года назад

Hey were did you get the bling kit

@taylorwilliams2376 4 года назад

Could I use just the throttle tube for the 125 and keep the same throttle cables to upgrade to full size grips?

@loganmarksmedia 4 года назад

Yes, as long as your stock cable is long enough. Because I added taller bars and the damping rods my stock cables were too short

@TheJameskerr 4 года назад

Did you have stock clamp?

@marcjonmeniano9664 4 года назад

do you have a junk dirt bike like 110cc?

@michaelpattee6669 4 года назад

did doing the crf125 throttle tube/cable/housing make it a 1/4 twist throttle? i am trying to make mine a 1/4 twist but there is not much info i have found on how to do so.

@loganmarksmedia 4 года назад

It's just the stock crf125 tube and cable. It doesn't feel quite as quick as a 1/4 CR throttle - but it also doesn't feel as bad as a 1/2 turn. I don't mind it at all and my big bikes have 1/4 turns so that's what I'm used too.