Тёмный

[2020] How to Solder 18650, AA, 9v, or ANY Other Battery (To Make Battery Packs) | Safe & Quick 

DaGoose
Подписаться 3 тыс.
Просмотров 140 тыс.
50% 1

This very quick and informative guide will show you how to solder any battery (Including Li-poly & lead acid). This guide will be useful if you are planning on making a battery pack or similar device and have a tight budget on tools. You can get a good soldering iron for as low as $10. 3 example batteries were shown in the video so that the viewer can have an understanding of the soldering process on a variety of different batteries. The same process is followed despite the type of battery. Please understand though, a general knowledge of batteries (and their safety) is required before attempting anything in this guide. Other than that you should have no problems. By following the steps shown in this guide, you comply to the disclaimer shown below in this video's description. Subscribe to join DaGoose Flock! ;)
⇨ This guide was suggested by NUMEROUS users on Goose's external social media (Instagram & Twitter). Big thanks to everyone that submitted this video suggestion! Video suggestions are always appreciated and taken into consideration. However, for video suggestions to be accepted, they must be related to the channel's general topic (technology) and can be done possible by me. You may post them on any video's comment section. Be the next to see YOUR channel mentioned here!
[Disclaimer]: Under no circumstances will I held responsible for the damage of your property or yourself from following the directions in this video. Everyone that attempts the steps in this video must do so AT THEIR OWN RISK. This video assumes that the viewer has intermediate to advanced soldering skills and also has knowledge regarding the importance of how different batteries react to heat.
▬▬▬▬▬▬▬▬▬▬▬[Links]▬▬▬▬▬▬▬▬▬▬▬
⇨ Subscribe: / dagoose
⇨ Instagram: / dagooseyt
⇨ Discord: / discord
⇨ Twitter: / dagooseyt
⇨ EasyEDA Profile: easyeda.com/DaGoose
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Хобби

Опубликовано:

 

19 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 129   
@neeraj563
@neeraj563 Год назад
I just applied your method. My soldering kept falling off. I scraped surface and used soldering paste and it helped. Thanks buddy
@Shakey31
@Shakey31 Год назад
Ditto. I used a Dremel to rough up the ends of regular Aa nimh battery. Worked great
@dalegass784
@dalegass784 Месяц назад
I've been mucking with electronics for decades, soldering for all of that. But I picked up some handy tips from this video. Really well done!
@ktrump5882
@ktrump5882 2 года назад
Thanks for the video homie 🤙🏽
@zerodefault3069
@zerodefault3069 Год назад
Just repaired my portable blender, thanks man
@aziz1981
@aziz1981 3 месяца назад
Thank you for this helpful video.
@raphaelvictoratanacio5362
@raphaelvictoratanacio5362 3 года назад
This is cool! Thanks for this
@guyvautin3807
@guyvautin3807 6 месяцев назад
Thank you simple easy, done.
@bickyboc
@bickyboc Год назад
Very useful video. Thank u
@tausiprahmanshihab
@tausiprahmanshihab Год назад
Thanks you so much sir From Bangladesh 🇧🇩🇧🇩
@Android25K
@Android25K 4 года назад
I don't know when I'll use this, but thank you
@dinkfeatherhead8340
@dinkfeatherhead8340 3 года назад
Came here to fix my disposable😎
@emmachambers1338
@emmachambers1338 3 года назад
did it work
@bradlynowell7499
@bradlynowell7499 2 года назад
LMFAOOOO SAME💀😭
@3dayrain225
@3dayrain225 2 года назад
😂 same
@inutero2068
@inutero2068 2 года назад
Same lmao
@teetee4291
@teetee4291 2 года назад
@@emmachambers1338 49
@nikko
@nikko Год назад
Thanks for this
@rexluna5430
@rexluna5430 2 года назад
This was such a useful god damn video. Thank you.
@nidhishree3795
@nidhishree3795 3 года назад
THANK YOU
@cliffBMRC
@cliffBMRC Год назад
Excellent!!!!!!!!!!!!!!!!
@jameslfowler9988
@jameslfowler9988 4 месяца назад
kind of always thought that soldering a battery would make it rupture and explode? the things you learn sitting on ass at home..... can be educational. cheers dude!
@trollking202
@trollking202 2 года назад
I’m use this 🤔excellent 😊
@PrafulMeena
@PrafulMeena Год назад
Thanks man
@sasquatch3945
@sasquatch3945 3 месяца назад
Thanks!
@GarethCometa
@GarethCometa 3 месяца назад
Is a battery with little remnants left on still safe to use?
@Koryteq
@Koryteq 3 года назад
Hi, thanks for the video. Does it matter where exactly I put the wire in a 9V battery? I see that in your 9V battery in '+' you soldered a wire exactly in the middle, but in '-' at the edge of the spot. Thanks
@DaGoose
@DaGoose 3 года назад
No, it does not matter. Just ensure that the wires are firmly soldered to any part of the leads.
@lamboking8able
@lamboking8able Год назад
Way easier than I thought tbh
@sykeamer88_20
@sykeamer88_20 3 года назад
Nice
@dragomxsoldier
@dragomxsoldier Год назад
How about Gameboy cartridge battery like the 1616 for Pokemon
@geminigem9526
@geminigem9526 6 месяцев назад
IS it dangerous to solder batteries. ? What to look out Safety factor when solder?
@ofcv1238
@ofcv1238 3 года назад
As a general rule, fine sandpaper was missed. You can’t see microscopic oxidation which prevents bonding.
@DaGoose
@DaGoose 3 года назад
I suggested a flat blade screwdriver which is also suitable for removing the oxidation.
@ofcv1238
@ofcv1238 3 года назад
@@DaGoose I was not entirely dismissing the idea but certain most think you were knocking off high points and probably not as effective as a form-fitting abrasive...but you are right...does job. I believe few understand why soldering wires or pipes is VERY difficult or impossible without mechanical removal of invisible oxidation and flux.
@davidbarker3591
@davidbarker3591 Год назад
I like a small wire wheel on my Dremel to clean the battery ends
@gtasandman
@gtasandman 2 года назад
Will this work with button cells? like a 2016 size.
@DaGoose
@DaGoose 2 года назад
Yes, but be very careful. Some users on here had commented that they are prone to exploding.
@mikecripps6990
@mikecripps6990 Год назад
Hi, thanks for the video. If I wanted to join 18650 or 21700 batteries together in a line (creating a stick) how do I join them? Any advice will be much appreciated.
@DaGoose
@DaGoose Год назад
line up the cells vertically by alternating polarity then connect them using nickel strips, where you connect negative to positive on each side (be careful not to short circuit!) until all cells are connected in series and you have an open positive on one end and an open negative on the other end. then fold each of the nickel strips with the cells connected so that the cells are in a single line. This is how cells are commonly put in a line in laptop battery packs.
@mikecripps6990
@mikecripps6990 Год назад
@@DaGoose do you think you could provide a video to do this? 😉
@DaGoose
@DaGoose Год назад
i won’t make one because this is a specific problem. i only have but so much time in the real world to make videos so [out of interest in high viewership] if i make one it’s usually regarding a solution to a problem that’s widely encountered. However, the next video will be about making lithium ion battery packs which should at least get you started.
@ninomandal181
@ninomandal181 2 года назад
We can simply connect a 9v battery connector for the 9volt battery... So no need to solder.
@walterr8115
@walterr8115 2 месяца назад
Ily ❤❤❤
@jjaylad
@jjaylad 3 года назад
I want to replace flat top D cells with cells that have a post on the positive end and they don't fit. How can I remove/flatten the post?
@DaGoose
@DaGoose 3 года назад
You’ll have to link a picture to show me. It’s a bit confusing just simply reading the issue.
@davidbarker3591
@davidbarker3591 Год назад
You have a button top, made for flashlights, etc. Do NOT try and smash it. Just go buy a flat top..
@phatman808
@phatman808 2 года назад
What temperature did you use?
@DaGoose
@DaGoose 2 года назад
My soldering iron doesn’t report temperature so I’m not exactly sure about that. Though, I do remember that the soldering iron is 60w total power and I used about a fourth of the power for this guide. Hope this helps.
@davidbarker3591
@davidbarker3591 Год назад
Try and get the iron to 750*F to 900*. You want it HOT. I. Tin my strip or wire, tin the battery cap and usually on and off in 2 seconds
@falkenvir
@falkenvir 2 года назад
What Solder Power you used 40W is enough?
@davidbarker3591
@davidbarker3591 Год назад
Yes, just have wait between solder jobs to let the 40W build up heat
@hamzahyassine8752
@hamzahyassine8752 9 месяцев назад
I tried soldiering my 18650 battery for a few hours, but the soldier would never stick to the battery. It felt like the flux even made it worst. So I just held the strip with electrical tape.
@aleksanderholm2428
@aleksanderholm2428 Месяц назад
You taped a nickelstrip on top of the battery.....?
@saurabhjuvekar3671
@saurabhjuvekar3671 2 года назад
No matter how much I try to solder strip and battery, I failed everytime. It's very hard to apply solder to nickel strip even with flux. I try so much and end up buying new trimmer... 😄
@d_sidepaintball
@d_sidepaintball 2 года назад
Sand paper or razor scuff and flux
@5gun1
@5gun1 Год назад
LOL IM TRYING TO SOLDER TO MY TRIMMER TOO LMAO
@saurabhjuvekar3671
@saurabhjuvekar3671 Год назад
@@5gun1 & Left with damaged trimmer body..😅
@5gun1
@5gun1 Год назад
@@saurabhjuvekar3671 dude update, things are actually going well I removed the old battery (had to break a bit of the strips) but my new batter is too long. I’ll have to break some the plastic casing to let it fit. Will have to hold it together will electric tape. Honestly I just like fixing things myself and learning. I probably could’ve bought another razor but now I’ll have experience with soldering so can’t complain (:
@adolfventer7481
@adolfventer7481 Год назад
No way what is it with trimmers? I am also trying to fix my trimmer!
@tutornews7596
@tutornews7596 2 года назад
What's the power of your solder iron? 30W?
@DaGoose
@DaGoose 2 года назад
40w
@sakomorgan1192
@sakomorgan1192 2 года назад
Bro I dosent have this cream dose it make a problem?
@denrico777
@denrico777 2 года назад
I think you're talking about the flux. Yes, you need the flux.
@philsketball
@philsketball 2 года назад
Where do you get nickel strips
@DaGoose
@DaGoose 2 года назад
Buy them online. I found the ones in this video on Amazon
@sharkhunter451
@sharkhunter451 8 месяцев назад
What temp do you recomend?
@michalis5817
@michalis5817 Месяц назад
30000 Fahrenheit
@iGentle0
@iGentle0 3 года назад
My solder doesn't stick to the metal of the battery nor the nickel strip. Are you using anything special?
@DaGoose
@DaGoose 3 года назад
Did you use additional flux as shown in the video?
@iGentle0
@iGentle0 3 года назад
@@DaGoose yes I did add flux but it didn't help. I saw there is special type of flux for nickel and stainless steel.
@DaGoose
@DaGoose 3 года назад
@@iGentle0 there is no special type of flux that you need to use. Rosin core flux should do the trick. I don’t think acid based flux will work with this
@iGentle0
@iGentle0 3 года назад
@@DaGoose I'm using this one ibb.co/dL5YCrR Is it also working with you on the nickel strip?
@sparkster7744
@sparkster7744 3 года назад
Scratching the surface lightly might provide exposed metal to solder on. Also, be sure to get a good quality solder, cheap ones just won't stick to anything no matter how hard you try
@viktorbachew3316
@viktorbachew3316 Год назад
bro what is that liquid or smtg over the batery 0:38
@liouxliouxisgod
@liouxliouxisgod 3 месяца назад
Solder….because they’re soldering a battery
@steptodraw3811
@steptodraw3811 Год назад
1000th like
@oldschool8432
@oldschool8432 2 года назад
Came here to replace my internal battery mod What solder did you use?
@DaGoose
@DaGoose 2 года назад
I used 63/37 1mm Chinese solder
@oldschool8432
@oldschool8432 2 года назад
@@DaGoose Thank you. I have never soldered anything in my life before
@oldschool8432
@oldschool8432 2 года назад
@@DaGoose Can you please help me? I am trying to solder a small wire to a 18 350 battery for my vape. It came with an internal battery but I'm able to replace it but I cannot get the solder to stick. I clean the surface, I sanded it and wiped it with alcohol and I cannot get the solder to work. I have a brand new solder iron new solder and flux
@DaGoose
@DaGoose 2 года назад
You’ll want to apply flux to both the wire and the Battery. If the solder won’t stick to the wire, try using a different wire consisting of different conductors. EDIT: I don’t suggest using alcohol. That could be your primary problem.
@oldschool8432
@oldschool8432 2 года назад
@@DaGoose The solder doesn't stick to the battery or the wire. I'll clean up everything tonight with water and resend the battery down. Thank you for your help
@anishhirve7741
@anishhirve7741 2 года назад
Do i have to use single stranded wire or multi standard wire ? please help sir.
@DaGoose
@DaGoose 2 года назад
Either would work, but ensure the current going through the wire(s) isn’t too high else they will burn up.
@davidbarker3591
@davidbarker3591 Год назад
Either...solid wire can carry a little more amps
@carmenskelton
@carmenskelton 3 года назад
PAX!
@dragomxsoldier
@dragomxsoldier Год назад
What about 1616
@caulkwater
@caulkwater 2 года назад
Do I need flux?
@DaGoose
@DaGoose 2 года назад
Yes, else the solder won’t stick.
@Jack-rs8kr
@Jack-rs8kr 7 месяцев назад
it want do it 😢
@HuzaifaM123
@HuzaifaM123 4 года назад
What are some real life applications of this?
@7889915
@7889915 4 года назад
Huz Gaming.....I can answer this one as I just had to do this on a pricey wifi thermocouple device. The manufacturer had 1 ni-mh battery spot welded to the pcb. After so many charge/discharge cycles, the battery finally gave up the ghost and wouldn't charge anymore rendering a $200 device useless. A total loss from a $2 AA battery? I think not. I didn't have the perfect solder setup, but did my best with my cheap iron and soldered a new battery back in place. Spent a few hours learning and trial/error labor, but in the end, I saved $200 from buying a new device and learned something in the process. Highly recommend!
@phatman808
@phatman808 2 года назад
Making rechargeable battery packs for lots of different things.
@davidbarker3591
@davidbarker3591 Год назад
Repairing power tool battery packs
@ash1eyrose
@ash1eyrose Год назад
Repairing something that uses rechargeable batteries that will no longer hold a charge and need to be replaced
@luieg9482
@luieg9482 2 года назад
Came here to attach a battery to my vape that broke bill nye style
@ugenegareth9339
@ugenegareth9339 2 дня назад
I answered and said, "If I have found favor in thy sight, O Lord, show this also to thy servant: whether after death, as soon as every one of us yields up his soul, we shall be kept in rest until those times come when thou wilt renew the creation, or whether we shall be tormented at once?" 76 He answered me and said, "I will show you that also, but do not be associated with those who have shown scorn, nor number yourself among those who are tormented. 77 For you have a treasure of works laid up with the Most High; but it will not be shown to you until the last times. 78 Now, concerning death, the teaching is: When the decisive decree has gone forth from the Most High that a man shall die, as the spirit leaves the body to return again to him who gave it, first of all it adores the glory of the Most High. 79 And if it is one of those who have shown scorn and have not kept the way of the Most High, and who have despised his law, and who have hated those who fear the Most High -- 80 such spirits shall not enter into habitations, but shall immediately wander about in torments, ever grieving and sad, in seven ways. 81 The first way, because they have scorned the law of the Most High. 82 The second way, because they cannot now make a good repentance that they may live. 83 The third way, they shall see the reward laid up for those who have trusted the covenants of the Most High. 84 The fourth way, they shall consider the torment laid up for themselves in the last days. 85 The fifth way, they shall see how the habitations of the others are guarded by angels in profound quiet. 86 The sixth way, they shall see how some of them will pass over into torments. 87 The seventh way, which is worse than all the ways that have been mentioned, because they shall utterly waste away in confusion and be consumed with shame, and shall wither with fear at seeing the glory of the Most High before whom they sinned while they were alive, and before whom they are to be judged in the last times. 88 "Now this is the order of those who have kept the ways of the Most High, when they shall be separated from their mortal body. 89 During the time that they lived in it, they laboriously served the Most High, and withstood danger every hour, that they might keep the law of the Lawgiver perfectly. 90 Therefore this is the teaching concerning them: 91 First of all, they shall see with great joy the glory of him who receives them, for they shall have rest in seven orders. 92 The first order, because they have striven with great effort to overcome the evil thought which was formed with them, that it might not lead them astray from life into death. 93 The second order, because they see the perplexity in which the souls of the unrighteous wander, and the punishment that awaits them. 94 The third order, they see the witness which he who formed them bears concerning them, that while they were alive they kept the law which was given them in trust. 95 The fourth order, they understand the rest which they now enjoy, being gathered into their chambers and guarded by angels in profound quiet, and the glory which awaits them in the last days. 96 The fifth order, they rejoice that they have now escaped what is corruptible, and shall inherit what is to come; and besides they see the straits and toil from which they have been delivered, and the spacious liberty which they are to receive and enjoy in immortality. 97 The sixth order, when it is shown to them how their face is to shine like the sun, and how they are to be made like the light of the stars, being incorruptible from then on. 98 The seventh order, which is greater than all that have been mentioned, because they shall rejoice with boldness, and shall be confident without confusion, and shall be glad without fear, for they hasten to behold the face of him whom they served in life and from whom they are to receive their reward when glorified. 99 This is the order of the souls of the righteous, as henceforth is announced; and the aforesaid are the ways of torment which those who would not give heed shall suffer hereafter." 100 I answered and said, "Will time therefore be given to the souls, after they have been separated from the bodies, to see what you have described to me?" 101 He said to me, "They shall have freedom for seven days, so that during these seven days they may see the things of which you have been told, and afterwards they shall be gathered in their habitations." 102 I answered and said, "If I have found favor in thy sight, show further to me, thy servant, whether on the day of judgment the righteous will be able to intercede for the unrighteous or to entreat the Most High for them, 103 fathers for sons or sons for parents, brothers for brothers, relatives for their kinsmen, or friends for those who are most dear." 104 He answered me and said, "Since you have found favor in my sight, I will show you this also. The day of judgment is decisive and displays to all the seal of truth. Just as now a father does not send his son, or a son his father, or a master his servant, or a friend his dearest friend, to be ill or sleep or eat or be healed in his stead, 105 so no one shall ever pray for another on that day, neither shall any one lay a burden on another; for then every one shall bear his own righteousness and unrighteousness." .....2 Esdras 7:75 ////////////////
@tadthompson3943
@tadthompson3943 7 месяцев назад
a"
@dylanlester113
@dylanlester113 2 года назад
Me wishing to see the dislike button before I blow up a battery
@DaGoose
@DaGoose 2 года назад
As of today, the like to dislikes on this video are: 643 / 28
@question4552
@question4552 2 года назад
@@DaGoose wait, you can see the dislikes? How?
@DaGoose
@DaGoose 2 года назад
I can see the like to dislike ratio in RU-vid Studio > Videos
@rexsceleratorum1632
@rexsceleratorum1632 Год назад
Wear some serious safety goggles, because cleaning battery goop out of your eyes is hard. Just sayin'
@DaGoose
@DaGoose Год назад
What battery did you attempt to solder
@steves313
@steves313 3 года назад
my battery exploded in my face
@DaGoose
@DaGoose 3 года назад
I am sorry you experienced that. Hope everything is ok.
@mjyanimations1062
@mjyanimations1062 2 года назад
This is why it's recommended to spot weld them, not solder
@jeffclassics
@jeffclassics 2 года назад
18650 must be discharged., everything in the video works and i actually made many solders using this method. Maybe you over solder and the blob of lead shorted the positive to negative, likely scenario if unexperienced.
@SellamAbraham
@SellamAbraham 3 года назад
Don't bother trying this, it doesn't work.
@DaGoose
@DaGoose 3 года назад
It clearly does work, as I have shown it in this video and others. Please address any issues you are having. I’m willing to help you.
@i80386sx
@i80386sx 3 года назад
I hope you're wrong. I'm trying this on a CR1632 tomorrow.
@Cherriedsalmonbowl
@Cherriedsalmonbowl 3 года назад
Wrong
@SHADOW-bg4mm
@SHADOW-bg4mm 3 года назад
i'll have to try it again, i didn't scrape the medal to expose it, as one comment suggested
@liouxliouxisgod
@liouxliouxisgod 3 месяца назад
How you going to sit there and watch the dude do it and say it doesn’t work? Do you tell math that it doesn’t work if you don’t get a math problem correct?
Далее
SOLDERING 18650 BATTERY - SAFER & MORE CAREFUL
9:54
Просмотров 34 тыс.
OMG! Bei der Hochzeit betrogen 😨 #tricks
00:43
Просмотров 1,8 млн
Мышка на механике?! Ну почти!
00:48
How to solder 18650 Li-Ion batteries
14:19
Просмотров 107 тыс.
Beginner’s guide to building safe 18650 batteries
19:38
How to solder 18650 Li-Ion batteries
7:40
Просмотров 23 тыс.
Wanna make 18650 Battery Packs? WATCH THIS FIRST!
9:20
Странный сбор подсолнуха 🌻
0:24