2020 Mavic 2 Pro Anamorphic Lens by Moment 

João Pina thanks! I’ll be shooting a new video on the Anamorphic tomorrow! Hopefully posted by Wednesday! Thanks for the support 👍🏼

LOL!! Truth! I’ll be releasing another video on the anamorphic next week explaining the good, bad, and ugly

THANKS!

thanks!!!

Interesting.... I haven’t tested this out but now I’m really curious, it does make since though 👍🏼

Thank you for your reply. A video of the rolling shutter phenomenon has been uploaded to my channel. However, this is a known issue and seems to have been answered by Moment in the KickStarter forum, where it would subside after taking off the drone. I didn't notice because I didn't fly. However, in general, the rolling shutter phenomenon is more noticeable when the image moves, and the slower the shutter speed, the more this phenomenon becomes more noticeable as the shutter speed increases in a stationary state. Although the principle, including the fact that it will subside when the drone flies, has not yet been fully understood, the area where the drone side performs electronic rolling shutter correction is to attach an anamorphic lens and form an image on the sensor May be doing something wrong as a result of a slightly different result.

Probably, I understand why. This is a slight gimbal pitch caused by the gimbal being overweight. It is expected that the pitch will subside by taking off or increasing the power of the ball or the frequency of the correction.

Happy to! Next video will address that 👍🏼

It is not about the aspect ratio only. Simply said: it is not about the bars only, but about what is between the bars. The field of view is larger on the horizontal axis and unchanged on the vertical one. That transformation gives a very cinematographic aspect to the film that you can't achieve in post-production by adding the bars. I'm very satisfied with the result, but I'm scared by the lens unbalancing my gimbal and dropping of video as a result. You can lose your drone that way. Apparently, the incident occurs only at high winds and/or high speed. PS - I haven't bought the lens yet, but I intend to buy it. These comments are based exclusively on RU-vid movies. I hope this will help you!

paul chitonu thanks Paul! Great reply! I’m doing a full review this coming Monday, hope it helps!

The weight has to be perfect centered, try that before sending it back, if you don't center it, it doesn't fit and the gimbal gets jammed. Is that what's happening to you? Mine did that the first time I tried to put it on. But if its not fitting its not fitting. The good news is Ive been shooting with the lens a lot the last few weeks and attaching it gets easier and easier, now I can do in super fast and sometimes you don't even have to do the calibration, just takes some practice. Hope you get yours working soon! I love this lens!

@@epvideocreations520 Thanks for the advice. Nah, it looks like it's just a bad unit. When the two pieces are together, they are small than the gimbal. Most likely it just got past quality control. My friend has one and it just snaps right on. I wish Moment had goe rubber or something soft for the lens housing. No worries. Thanks man!!

Thanks! According to Moment you need to calibrate every time because you are adding the lens after the gimbal is powered on. But.. I’ve used it a few times with out doing the calibration and it still seemed to work

@@epvideocreations520 Thank you for your Reply! Make moments "WE" 😊 can't forget, with this lense...

D-Log 265 + Lut color graded. A couple of the shots were done in HQ as well

Thank you so much for the quick reply...context is good. One more thing...Does Moment include an ND 16 with the lens? I have a pretty complete set of their iPhone lenses and a Movi. I like Moment

No they do not include them, but they do have them for purchase

When you turn it off it’s recommended by moment that you remove it. And it has to be removed before starting up again. Nope it can’t do the full gimbal check with it on. Full review is coming this Monday, stay tuned

DANOfilms great question! I’m working hard on doing a full video review soon for everyone with the many questions. Short answer- This will happen, the counter weight and lens is surprising heavy. My latest experience I was struggling to get the gimbal calibrated. High winds will cause the gimbal to drop. So far it hasn’t happened to me but it doesn’t surprise me that it happened with the Jet

@@epvideocreations520 This is my big concern too and so far I keep my money in my wallet. Mavic 2 Pro is too expensive to be lost so easy!

Watch my full review and it explains your question: 2020 Review Mavic 2 Pro Anamorphic Lens ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Eltwa0_cXqA.html

D-log M

4 - 64ND $19 each

Great Question! You can only use the Moment ND filters with the Moment lens. Unless a new company starts making ND filters that will fit over the Moment lens but I seriously doubt it

@@epvideocreations520 I am currently using the nd filter of the pgyytech company. Looking at your video, I think the nd filter of pgytech is maneuverable.

@@epvideocreations520 But I am looking forward to the filter you showed me because it looks safe.

Moment makes great glass products so I wouldn’t be overly concerned about the quality of ND filters from moment. They make great products! Because you have to mount the Anamorphic lens directly to Mavic lens with the stock glass removed, there’s no room to mount a non moment ND filter. It has to be mounted to the outside of anamorphic lens

Check out my full review if you want some questions answer regarding the Anamorphic lens

A place Beyond Belief by Sounds Like Sander app.soundstripe.com/songs/6536

Yogita Thakur check Out my other video it gives you a full explanation: 2020 Review Mavic 2 Pro Anamorphic Lens ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Eltwa0_cXqA.html

🙌🏻

Link is in the description

Yep, it’s a skin made by decalgirl.com #starkiller design

Благодарность

Thanks! Came from decalgirl.com

DJI necesita dejar de restringir drones en la aplicación. Es responsabilidad del piloto estar seguro y seguir las reglas, no una corporación. ¡Buen comentario!