Need advice, so my rear left door had a huge scrape, so I decided to replace the door. Transferred everything onto the new door. Everything works but when I lock the velar, the handle goes inside but not fully, I have to move it with my finger to the right and then it shuts. What do I need to do? Thank you
The same exact thing happened to me on that very same car,I had took the door back apart to make sure everything was plug in and it was so I had the tech guy reprogram it and it went right in
I removed my passenger rear door panel to fix my speaker it was successful now for some reason the door won’t open from the inside but it open from outside any idea bro?
Hey man I finally replaced the main control window module and it fixed the issue. All windows go up and down except the driver window. I hear the motor when I pull on the switch but doesn’t roll it down or up. I had to replace the door before this. Do you think maybe the window is not aligned causing it to fall down by itself??
Double check to make sure the window is on the regulator then put the door back together. Pull up on the switch once if the window doesn’t goes up by itself hold the switch up for 15 to 20 seconds
@@BumperdoorDIY Will do thank you, I’m super happy that replacing the main module fixed the issues with the windows and I can finally adjust my side mirrors , tomorrow will take it down and see if it’s on the regulator. Right now literally if I pull up or down the window with my bare hands the window moves up or down…
Hi my Range Rover velar front driver window wont go up or down. I tried the resetting process holding the button down and then up for 10 seconds and nothing. What can be the issue?
@@BumperdoorDIY Last question , I tried using a small flat head screwdriver to remove the little panel cover inside the handle but I can’t get it off. What tool you recommend?
Try using a pick tool to get it out of there sorry I took so long to get back to you at duty calls. Did you get that window to work If not take off back the trim panel and make sure all of the wires are plug back in
@@BumperdoorDIY What’s up managed to remove the interior panel to check everything, and it’s all the connections are connected. The window won’t go up or down but always none of the window switches work on my driver side , and also you can’t even adjust the side mirrors because it doesn’t work. Any advice?
Morning wise guy sometimes these types of vehicle need to be hook up to the computer and get reset, take it to a shop and have them reset it for you but they will charge you a price unless you buy the device and do it yourself