2021 Ford F150: Complete Door Panel Removal 

Thanks for watching and commenting. Love the enthusiasm! Glad to help out.

No problem. Glad to help out. Thanks for watching,

Do a search and see how many videos stop at removing the internal door handle cable. It almost seems as if it is the forbidden zone. "Don't remove the complicated door handle cable."

Thank you. Glad to hear that it will help you out.

Thanks for watching and commenting.

No problem. Glad to help out.

You're welcome. Thanks for watching and commenting.

Thank you for watching and commenting. Glad to help out where I can.

Thanks. Glad to help out.

Thanks for watching.

I removed the panel in order to completely remove the window glass. I removed the glass to tint it. I was able to take the window indoors and get a much cleaner tint install. There is another video on my channel that covers the window glass. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LT-qJr8Z41o.htmlsi=3KCElE-FywnMiYo3 It will more than likely be your window regulator that is causing the closure issue. The window glass locks in place with plastic clips that aren't adjustable. Check window channel for obstructions. Reset window motor/regulator- turn key to accessory (not start). Push window switch all the way down so window goes all the way down. Quick pull the window switch so the window goes all the way up without having to hold switch. As the glass approaches the very top, pull the switch up and hold for two to three seconds. If window bounces back down a little, pull the switch again and hold for two to three seconds. This procedure is resetting/relearning stop point for window. This may not help the 1st time, but try it again.

You can use trim tools and attempt to remove it from the top, but it is easier to follow the panel removal procedure. Look for the long rectangular pins with clips on the underside of the switch plate. Some have white plastic on them and some have black metal. Carefully push up on these from the underside to remove switch plate.

If you heat it up with a hairdryer it will bond again. If it doesn't you can buy some butyl sealant tape... auto parts store or home improvement store,

There's no specific cover behind the panel that protects your switched/electronics. The multi-layered cloth type material behind the panel is an insulation. It might offer some protection. The plastic liner only covers the outside lower 1/4 of the door. Unfortunately, you will have to remove the panel to replace any liner behind the door panel.

I don't believe you can change them out. On the backside there are posts that are plastic welded (mushroomed) in place. You could remove them, but you have to have new ones that you could plastic weld back in place. If you look up these specific replacement pieces you will see that they are only covers that go over the originals with 3M tape. Try this link to see what I am talking about: www.ebay.com/itm/403611345446?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20200818143230%26meid%3De36b9157fac84858b7410826a2ad62e5%26pid%3D101224%26rk%3D4%26rkt%3D5%26sd%3D234506122908%26itm%3D403611345446%26pmt%3D1%26noa%3D1%26pg%3D2047675%26algv%3DDefaultOrganicWeb&_trksid=p2047675.c101224.m-1 Another option is to find a vinyl wrap you like and can install.

@@RoCDIY Awesome! Thanks for the information and replying so quick!

I don't know what that means, nor can it be translated.

It is amazing how it is made out to be complicated. I think some people get overwhelmed by the number of screws around it and think it involves removing all of the screws.