About
The PK Ripper was the raddest, baddest, and most famous bike during the first BMX boom in the early 80s. Fast forward 40 years to today and now it’s the 29” Big Ripper that’s on top during the Big Bike BMX boom. This Big Ripper frame now comes equipped with an American bottom bracket and an OG seatstay wishbone plate just like the original PK Ripper. The 29” x 2.4” SE Bozack tires are just wide enough to give stability and cushion, but also roll extremely fast. Whether you are an old school BMX rider reliving your youth or a new school SE bike life rider raising it up, the Big Ripper is for you.
Key Features
Retro 6061 aluminum Big Ripper frame with Floval tubing, looptail rear end, American bottom bracket and classic PK Ripper wishbone plate
Full Cr-Mo Landing Gear forks
Cr-Mo Big Honkin’ cruiser bars
Double-wall rims with sealed-bearing and high-flange hubs
SE 3-piece V-Ridge cranks with alloy SE sprocket
Authentic ODI Mushroom II grips with donuts (Yellow Sparkle and Dark Blue Sparkle do not include donuts)
SE Bozack 29” x 2.4” tires
SE Flyer seat with SE bottle opener
SE Racing padset (Wood Grain, Yellow Sparkle, and Dark Blue Sparkle do not include padset)
SE Wheelie pegs
32 pounds
SPECIFICATIONS
COLOR(S) Red Ano, Wood Grain, Yellow Sparkle, Dark Blue Sparkle, Purple Rain, Ball Burnish, Classic Black
FRAME 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts
FORK Landing Gear, Full Cr-Mo
CRANKSET SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket
PEDALS Wellgo Low-profile Platform
CHAIN KMC S1
WHEELSET Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
TIRES SE Bozack, Street Proven Multi Purpose Compound, Wrap Around Urban Tread Pattern, Grooved SE Wing Logo, 29" x 2.4" Front & Rear
BRAKESET Tektro 855AL V-Brake, Slick Cable
BRAKE LEVERS Tektro 316A, 2-Finger Alloy
HEADSET Tange 1-1/8" Threadless
HANDLEBAR Big Honkin' Cr-Mo Cruiser Bar, 29" x 7", 12° Backsweep, 2° Upsweep
STEM Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
GRIPS Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ 45 Years of Radness SE Donuts (Yellow Sparkle and Dark Blue Sparkle do not include donuts)
SEAT SE Flyer Seat w/ Custom SE Bottle Opener Brace
SEATPOST Micro-Adjust Alloy, 27.2mm
SEAT CLAMP SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
ACCESSORIES Checkerboard SE Snap Padset, (Wood Grain, Yellow Sparkle, and Dark Blue Sparkle do not include padset), Alloy Valve Caps, SE Wheelie Pegs
WEIGHT 32 lbs / 14.51 kgs
*Specifications subject to change without notice
GEOMETRY
A TOP TUBE, ACTUAL 23.6"
B SEAT TUBE, CENTER TO TOP 16.9"
C SEAT TUBE ANGLE 71°
D HEAD TUBE ANGLE 71°
E CHAINSTAY LENGTH 18.25"
F WHEELBASE 44"
G BOTTOM BRACKET HEIGHT 12.25"
H STANDOVER 30.75"
SUGGESTED RIDER SIZE 5'5"+ (165cm+)
STEM 55mm
HANDLEBAR WIDTH 29"
CRANK 175mm
WHEEL SIZE 29"
SEAT POST DIAMETER 27.2mm
26 авг 2024
