If you want to sleep. You can turn the clock face completely off. By holding down the snooze button for 3 seconds. To turn display back on. Just push any button.
Thank goodness for your video. I couldn’t find any tutorials on how this clock works except yours and it was hard to find but nonetheless thankyou so very much for making this video and sharing it with everyone!
Error - re Alarm settings. there is Alarm time (hrs/min), snooze min, and work days. The 'work days' selection is 1-5, 1-6, and 1-7 this selection is for how many days you want the alarm to wake you, in case you want to sleep in on the weekends without turning your alarm off and on. Rather handy. Snooze 5, 6 or 7 min didn't make sense to me. In the snooze setting you can select as much snooze time as you desire.
after to select the 12 hour setting, click on the mode button, then u will see the hours number flickering, lets say its on 10 & u want it to be 10 PM, so all u have to do is click the up button, then it will say 11 then click the up button again then it will say 12 PM then 1PM then 2PM & so on till u reach the 10PM u want (in this example)...also it doesnt say AM, so if on the left there isnt anything then it means its AM, & if its PM, then u will find a PM symbol appear on the left..i hope that helps! cheers
make sure u clicked alarm mode (should show a cirlce) and then just set up a time then switch it back to mode and it should work what i like to do to make sure it works it set the mode to my time and then turn on alarm mode and just move it up a few mins like 1 or 2 and just wait for it to go off MAKE SURE ITS DURING THE SAME TIME AS PM OR AM
after to select the 12 hour setting, click on the mode button, then u will see the hours number flickering, lets say its on 10 & u want it to be 10 PM, so all u have to do is click the up button, then it will say 11 then click the up button again then it will say 12 PM then 1PM then 2PM & so on till u reach the 10PM u want (in this example)...also it doesnt say AM, so if on the left there isnt anything then it means its AM, & if its PM, then u will find a PM symbol appear on the left
when you make it pass 12 it should say pm at the top corner! make it pass 12 another time and if pm doesn't show then its set for am!! (i hope im right and hope it worked!)
click the mode button 3 times (so that you can see the temperature) then click & hold the mode button for a few seconds till u hear a sound, then bam, it will no longer transition between modes
