2023 Ninja 650 with Delkevic Exhaust PEAK Horsepower 

Man I love this channel I was just about to look up a ninja 650 on dyno and here you go!!!

Just shipped my 22 650 ECU in yesterday can't wait to get it back and see what we got

I have this bike with a Mivv full exhaust and of course that Moore Mafia ECU work!

Moore Mafia, y'all rock! ❤Peace

You will getting my ECU in the future 🤘🏽

Finally another 650. I sent my 2021 Z650 ECU to Chris at Moore Mafia last year and I love the tune. I did feel her more sluggish than before the tune. But that may have been due to the fact that I’m from Puerto Rico and the elevation, temperature and fuels are different. Chris if you get to read this I love my bike and you do amazing work. If you could comment on that it would be great but not necessary. Love from Puerto Rico! Come hit the drag strip some time here in the island

Please try and get some kspp throttle bodies for these, the stock are just soft rubber and squeeze at high rpm, thus crap top end. I have your flash, with a filter and the throttle bodies, I haven't been to the track yet to really test, but feels better on street anyway.

Sending my 22 650 ecu in with the same exhaust. Boy runs lean as hell right now lol

Hey Chris as much as I would love to agree with you the problem with all the other pipes you recommended are in the $800 to $1k+ price range, maybe you try get hold of Hindle EVO Megaphone Full Exhaust System I'm curious how well it does over the Delkevic exhaust.

Great vid, I have a ninja 650. Side Note, what are those ceiling lights?!

I have a golf tee jammed in my pair valve tube. 😂

Mr Moore mafia my name is Dylan all the way from South Africa... Bro u are amazing at what you do... Never had the finances to own a bike of my own but please help me... Been subscribed to you from a very long time please send some love to south africa

Cool beginner bike, looks good and just enough power to have fun, especially now with the MooreMafia touch👍🏻

Just got a Yoshi Stainless AT2 full system and K&N filter for my '18 GSXR 1000. Do you have a good tune?

Shorty pipes suck for the Ninja 650. There are reasons why Arata made a system that maintains back pressure. Leo Vince had a slip on too that had a windy mid pipe created for this exact reason.

Been wanting to get my ECU flashed by you but wanted to get a full exhaust system first. What full exhaust would you recommend for a 2016 ninja 650? Ive been between the Yoshi and or the akrapovic. Any insights would be appreciated

I have a delkevic on my gsxr 750 also had one on my cbr1000 have vids of both on my channel gsxr exhaust clip under”yamawho”

Great job. Just a smidge

I have this bike with the akrapovic. Im debating sending in the ecu

Do you guys do ECU flashing just to get a stock set up to run better? I have a 650 and alot of on and off throttle jerking

Would you recommend doing the flash without buying an exhaust system? I have a 2023 650 as well.

I have a 2023 650 with this exhaust, had to buy clamps off of amazon to actually make it seal and stay on. Huge oversight by delkevic IMO

I got my 2023 ninja 650 flashed a while back, should I go back in and cover the pair valve?

Sounds ok. Weld it up. When ready to change saw it off. That torque number is very respectable

Have same bike . I have a hindle megaphone. Want a Ecu flash.

Would you be willing to work on a 2024 Honda fury.

Does anyone know if you can fit these ninja exhausts on a vulcan? The aftermarket support for the ninjas are just better and I'm not sure why cause they run the same motor

Can the 2nd throttle plate be tuned?

My wife owns same bike. Very interesting

Damn the 2024 Kawasaki ninja 650 has like 67 hp

If i buy a tune will that get me entrys into the giveaway

Does a flash void the warranty?

Have 2023 ninja 650 with hindle megaphone full system.

Hi mate been watching your vids for a while now and wondering if you could help me out? Im in Scotland have just built me another 5VY R1 track bike and on the back wheel im feeling like its resisting a bit when i spin it freehand. Ive recheched all my torque tubes etc with micrometers and it all checks out, its on new bearings and they got rechecked too and all minted. I've only gave the floating tube and all the rest of the assembly a light glove smeared coating of my bearing grease and the bearings themselves got just enough as i wanted to keep the greasing light as its obviously going to be getting taken off a lot and inspected a lot now. I just feel like its not as free moving as it used to be and thats without the chain on it and brake caliper on it so no drivetrain loss at all. Its not "hard to move" per say but if i give it a good hard push i get just over 1 rotation of the wheel and with all the chain and brakes fitted id be lucky to get one full rotation unless i really push the tyre hard. Would you say this is a problem or am i just paranoid and because quite a lot of the assembly and the grease is all new that its likely to be tight. Can post a vid of it.

That almost sounds as good as my childhood 1970's Schwinn did with the card's in the spokes. 😂

Sounds like my old 4 wheeler

Chris, what happened to zx6 you were trying to blow up? Should see how much nitrous it will hold. 😂

Will flashing the ECU void the factory warranty? I just bought a 2024 650 hence the question.

Change your camera position . Can't see the new display during runs .

Would a bone stock z650 ecu be worth getting the ecu reflashed ?

I was gonna have moore mafia tune a 2017 650 but glad I didn't thought I would of got more power but not much more n the engine break hits to hard

everything is fine but i think now it's time for Kawasaki to make this Ninja 650 a little bit more aggressive and track friendly.... just a lill bit....

I got a 09 flashed

@moore mafia I want to bring my 24 ninja 650 to you I’ll be coming from Long Island ny gonna have akropovic full titanium race exhaust velocity stacks dna air filter pair valve block and o2 delete

I have a delkevic exhaust 😆

CM$🤙🏾🙏🏾✌🏾

Delkavic are rubbish exhausts. A good but affordable exhausts for these things has to be leovince. They also have a resonator which makes it sound less raspy. Got one on my Z650 and while these engine don't sound the best, leovince pipes do make them sound fairly nice.

Bought one of these 650's as a first street bike after only riding in dirt. Really lacking the power for most american roads... Switched to a Z900 in only 4 months....

isn't it supposed to make 67 hp ? why was it making 58?

My 86 250r made that much hp

That first pull sounded like absolute crap. I have a 2008 ninja 650 with a Delkevic I promise I can out run that thing. I love the way it sounds ,and just sayin mine has right at 78hp. I don't think that's a exhaust thing as much as it is a Kawi thing with all the new poop they do to the bikes.

The new era of 2cyl 600s is sad. Sounds like my lawnmower and makes about the same power.

Throttle is very jumpy

Lol, for a couple of buck more. $1000+ is not a couple of bucks more.

*RU-vid has a porn bot problem😂*

Yeah Djokovic is definitely shity I bought one on my old Gixxer and when I put it on it ran worse I went back to my Yoshi

Moped.

I literally have a lawnmower with more horsepower and alot more torque than that junkie girls bike

They sound horrible.

Not a fast bike. Looks fast but 65hp?? 😅

I have 2023 ninja 650 full K.O exhaust system and power commander can I still send in my ecu

First 😂