2024 Mini ITX PC Build ASMR | NR200P

Подписаться 6 тыс.

Просмотров 63 тыс.

50% 1

#coolermaster #miniitx #7950x #amd #am5 #radeon #7800xt #pcbuild #miniitx #itx #asmr #nr200p
I built NR200P again, which was my channel's first ITX build video two years ago, with a similar but new configuration.
▶ System info
▷ CPU : AMD Ryzen 9 7950X
+ Thermalright PA120 MINI BLACK
▷ M/B : ASUS ROG STRIX B650E-I GAMING WIFI
▷ RAM : TeamGroup T-CREATE CLASSIC 32GB
▷ VGA : ASUS TUF Gaming RX 7800 XT O16G
▷ SSD : WD BLACK SN850X 2TB
▷ PSU : CORSAIR SF750 80 PLUS Platinum
+ Custom Modular Cable(PCIE)
▷ CASE : COOLERMASTER NR200P BLACK
▶ BLOG
in.naver.com/an2gen3
▶ E-Mail
an2gen3@naver.com

Наука

Опубликовано:

19 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 126

@vasileiospgr 2 месяца назад

One of the few builders who doesn't remove the CPU installing plastic bracket before installing it and does it as the manual says. nice dude 👍

@georgmartin_ 3 дня назад

In my opinion it is one of the most satisfying moments of the entire build :D

@vasileiospgr 3 дня назад

@@georgmartin_ yeah, that "pop" sound 😂

@mcrazza 3 месяца назад

Now that is one good looking stealth build right there! Love the NR200P case too. So easy to work with.

@shiftto 3 месяца назад

its great when you show how to manage cable neat and tidy, great tutorial

@YoLiMow 3 месяца назад

Nothing but PERFECTION!!!!!

@fairlymoon448 2 дня назад

you did that so neatly! love it

@henryteng-ti7gn 2 дня назад

love the way you did the cable management might have to copy your techniques in my own build!

@marksulloway5669 3 месяца назад

Nicely done.

@Hathal_98 2 месяца назад

beautiful

@mathieuchardonnet 3 месяца назад

really nice rig !! got the same motherboard and case with a MSI 4080 super. !!

@KiNgStoN1461 5 дней назад

That small piece of foam was goated.

@ted-b 3 месяца назад

Nice job.

@griffin1366 3 месяца назад

Nice!

@ahkmahadd2857 Месяц назад

Sick build love the blackout theme I want to build a super similar machine and wanted to use an matx board (no bottom fan) and wanted to know what your temps are like with this thanks

@Helios.vfx. 2 месяца назад

Didn't know such mini atennas did exist. Looks awesome

@kanatokazuya1637 2 месяца назад

Ikr. Just knew about them because of this video, and they're the exact antenna form factor that I need.

@CristianNinel Месяц назад

Anyone found a name ? I’m looking for this one too

@Helios.vfx. Месяц назад

@@kanatokazuya1637 yep me too. Lovely designs

@TheLoomit Месяц назад

Great build! I am planning to build something quite similar in the coming days. Did you daisy-chain the top mount fans?

@iikatinggangsengii2471 Месяц назад

my fav sfx case

@songhh777 3 месяца назад

노루 잘봤습니다.. 저는 v2 정발 기다리고 있어요 ㅎㅎ 상단 280 수냉 ITX 못 참아...

@pabloletelier3811 24 дня назад

Primer itx q veo q ponen incorrecto flujo de aire y se preocupan en hacer una buena gestión de cables, simplemente hermoso

@doomnationalist 3 месяца назад

That's one crazy thermal paste pattern lol

@kmillo77 3 месяца назад

Hey, great video as usual :-) Did you switch the cooler's fan direction on purpose? Looks like it's sucking air in from the back of the case. Does it improve temps?

@DalraeMyo 3 месяца назад

Since there is no separate intake cooling fan, the CPU cooler side is configured as a rear intake for balance. This configuration resulted in satisfactory results for both CPU and GPU.

@ElangTitoPersada Месяц назад

Nice

@50H3i1 Месяц назад

7800XT , such a good card

@Helios.vfx. 2 месяца назад

Brilliant build!! Finally someone did it with such processor. I didn't know there are air coolers for systems like this itx. Glad to have found your channel. Do you think if a 4090 would it in there? As for refference. I wanna build a similar one but next year with a 9950x + 5090, the annoying thing is that it does not support 128gb of ram, at least ther aren't DIM modules of 64gb each one that I know of.

@DalraeMyo 2 месяца назад

If it is a 3-slot RTX4090 less than 330mm long, it can be mounted.

@Helios.vfx. 2 месяца назад

@@DalraeMyo Thank you mate!

@paulbarriosduque1101 2 месяца назад

Best looking build so far. Can you please tell us if you have any intakes or everything is set as exhaust? Thanks

@DalraeMyo 2 месяца назад

The rear and bottom are in the intake direction, and the upper cooling fan is installed in the exhaust direction.

@hassannassar8136 2 месяца назад

great video bro, i have a question why not PS 120 SE at same price with 2 fans or the PA120 MINI BLACK has same/better thermals?

@spoorthyv Месяц назад

I have the regular PS 120 SE in my nr200p and its def the move. Its the better cooler and it fits great. Only reason to consider the mini is looks.

@Maddesen 2 месяца назад

Oh would've liked to see the NR200P V2..

@chairman67 3 месяца назад

we like the nr200p

@impaque 3 месяца назад

That foam will compress over time under pressure, FYI.

@vincetheveganprince 2 месяца назад

Happened to mine. Had to find another solution

@PleepyC 3 месяца назад

Really enjoyed watching this since it was very satisfying. Also do you have any case recommendations for mATX < 20L?

@DalraeMyo 3 месяца назад

In the ITX (SFF) system, I think the size preferred by the user is more important than the recommended specifications. In the case of NR200P, it is a little large to call the SFF system, but it uses a classic layout that does not require a riser cable, has a low price and compatibility with parts.

@ejolnafaz2357 3 месяца назад

If you like the NR200 design, try looking into the SAMA IM01 or the Tecware Fusion as it can support matx size

@etm0st 3 месяца назад

Interesting WiFi antenna you have on the build. How is the signal strength?

@DalraeMyo 3 месяца назад

There is no problem with Wi-Fi signals and Bluetooth reception around the PC. The reception rate drops from a distance of about 5 meters or more.

@ciskim6036 10 часов назад

Hi, would it be possible to use an ATX power supply in this case? It looks like it would fit in that mount.

@user-ph9tp8wk1f Месяц назад

how long did it take you to complete the build?

@Fahimpcbbd 3 месяца назад

nice stealth 0 rgb build.

@blindman8093 3 месяца назад

please try 14600k with axp90-x53 and id cooling is-55

@YeIlowv 3 месяца назад

rear intake ? or you're putting a dust fister on a exaust ? great build brozer

@Xipri.d.c. 3 месяца назад

rear and inferior intake, indeed nicely done in my opinion

@DalraeMyo 3 месяца назад

In the previous build, we added an intake cooling fan at the bottom, but in this build, we didn't have a separate intake cooling fan, so we tried to configure it as a rear intake cooling fan.

@paveltelegin7736 3 месяца назад

try the jonsbo z20 case. cheap, beautiful, 20 liters...

@DalraeMyo 3 месяца назад

If I have a chance, I'll try to build it.

@GeromeFournier 3 месяца назад

nice clean build! can you share the temps you have on the cpu/gpu while gaming? cheers

@DalraeMyo 3 месяца назад

In the previous video, it was measured about 10 degrees higher than when the CPU cooler and GPU were tested with an open bench, respectively. During gaming, the average temperature of the CPU was about 60 to 65 degrees, and the GPU was about 55 to 60 degrees.

@GeromeFournier 3 месяца назад

@@DalraeMyo oh wow! those are great temps

@itsSwagPrince 3 месяца назад

Love this build would a 7900xt or xtx work here ?

@DalraeMyo 3 месяца назад

It is possible as long as the size of the graphics card is compatible.

@itsSwagPrince 3 месяца назад

@@DalraeMyo is this the v1 of the case ?

@DalraeMyo 3 месяца назад

Yes, it's the V1 version, not the V2 version.@@itsSwagPrince

@smuludgn 3 месяца назад

Small tip wish I knew before building with this motherboard. You need to place the rubber spacer for m2 ssd otherwise m2 ssd pcb will bend.

@DalraeMyo 3 месяца назад

Yes, that's right. After I put the SSD in and covered the heat sink, I saw it bending when I looked at it from the side. I used an additional thermal pad under the SSD to prevent it from bending.

@stellina4557 3 месяца назад

노루 V2가 나오면 그때는 4080S로 조립해보세여

@samfisher_90_gamer Месяц назад

Good Stuff bro! The fàn on the bàck is 92 mm?

@Garrett1974 28 дней назад

must be yes, 120mm won't fit so I'm 99.9% sure it's 92mm

@ikhyunkim6433 3 месяца назад

빅타워 조립 잘 보았습니다. 노루2 나온다는데 그것도 맛 보실건가요?

@DalraeMyo 3 месяца назад

노루 v2가 생각보다 전작만 못하다는 평가가 자주보여서 고민중입니다..

@rahul875 Месяц назад

How the temperatures of the build

@nazoooom 3 месяца назад

I’m pretty sure the base NR200p is being discontinued for the new V2 version 😞 great build by the way & I love the little cutout for the GPU support. Keep up the good work

@kwangyoungkim8590 2 месяца назад

커스텀 케이블 모듈이라고 하셨는데 어떤 제품을 쓰시는건가요? 해외포럼 보고 nr200p에 7900 xtx nitro + 빌드 해보려고 하는데 케이블이랑 sfx파워 고르기가 가장 어렵네요

@DalraeMyo 2 месяца назад

국내업체는 맥스파인더에서 쉽게 구매가 가능하고, 필요시 주문제작으로도 오더가 가능합니다.

@Eong_cat 2 месяца назад

파워는 역시 SF750 저는 그리고 바오트레이드에서 은선 사서 썼어요 친절함

@kwangyoungkim8590 2 месяца назад

@@Eong_cat xtx 니트로가 전력을 450w까지 먹어서 750w는 좀 불안해서요 ㅠㅠ 850w 위에서 고르기가 어렵네여. Loki는 커세어는 1000w이상급은 sfx-l이고...ㅠㅠ 쿨러마스터는 뭔가 평이 안 좋네여

@crystallyralei7832 16 дней назад

1 intake 2 exhaust ?

@jamesb.walker9177 2 месяца назад

What temps you are getting on the CCPU with this cooler?

@DalraeMyo 2 месяца назад

In the video I uploaded just before, I did a temperature test for each scenario. Compared to the open-bench system, it has increased by about 10 degrees.

@DoubleDrastik 18 дней назад

What memory speeds you running

@flyme565 3 месяца назад

мой либимый вид техноп0rN0

@Creep4EverMV588 3 месяца назад

Can't the pcie cables eventually get too hot since they are resting on the gpu's heatsink?

@DalraeMyo 3 месяца назад

By the time the PCIE power cable gets hot, I don't think there's a problem because the GPU cooling fan is already working. The heat sink's temperature remains lower than the GPU core temperature, and the GPU core temperature does not exceed 60 degrees.

@boneivory2020 2 месяца назад

What is the rhcp 5.8G antenna used for in this build ?

@DalraeMyo 2 месяца назад

This is a mini antenna purchased from AliExpress. It is introduced as an antenna used for drones, but it was also available on PC.

@DavidKang0 3 месяца назад

자석 팬 필터 생각 못 햇는데 사야겟넹 어디 꺼 쓰시나요?

@DalraeMyo 3 месяца назад

PC부품 주문할때 해당 쇼핑몰에서 파는 가장 저렴한걸로 골랐습니다. 대부분 다 똑같이 생겨서 저렴한걸 여러개 주문하시고 필요한만큼 잘라 쓰셔도 됩니다.

@DalraeMyo 3 месяца назад

개당 1000원정도합니다.

@suduong7486 Месяц назад

đẹp thật

@dharatbeersingh8924 3 месяца назад

thermals ?

@mawandaeed 3 месяца назад

Nr200 matx

@Misha-ug8sh 3 месяца назад

Does not that case support preinstalled AIO?

@DalraeMyo 3 месяца назад

I think you're mistaken for the NR200P MAX model. The model that comes with AIO is the NR200P MAX model.

@gorapadyuck 3 месяца назад

Big chup.

@earlbond2929 2 месяца назад

What is the CPU, GPU & Room Temp in celsius when gaming? Thanks.

@DalraeMyo 2 месяца назад

On average, in a gaming environment, the CPU is around 65 degrees, and the GPU is maintained at 60 degrees.

@earlbond2929 2 месяца назад

@@DalraeMyo and what is the room temperature when gaming? Thanks.

@DalraeMyo 2 месяца назад

@@earlbond2929 It's roughly between 20 and 22 degrees.

@earlbond2929 2 месяца назад

@@DalraeMyo Thank you very much for the information. It is very useful in my future build.

@Werry_Rang 3 месяца назад

Would be much more favourable if the front was mesh

@trento7183 21 день назад

The sides can have intake fans, but u cannot use a tower cooler. Some RU-vidrs say a low profile cooler plus side fans give the best airflow for this case. If u go with a tower cooler, then the rear intake is the only option.

@jeddimaster5393 Месяц назад

does it close using the tempered glass with that cooler?

@Whiteshade Месяц назад

no thats why he doesn't show it closed

@jeddimaster5393 24 дня назад

@@Whiteshadebought the pa p120 mini ang tempered glass closed with no problem

@AbiSarav 19 дней назад

@@jeddimaster5393 Nice one! I was about to create something like this build too.

@JamesTodd 3 месяца назад

why didnt u get the V2?

@DalraeMyo 3 месяца назад

In Korea, where I live, there is no release schedule yet, so I could not purchase it. In addition, there is a fact that we did not feel much benefit from the NR200P V2 product.

@gefo0 3 месяца назад

This case is so sexy OMG, thank you for this video

@OAOA0 2 месяца назад

What type CPU fan?

@DalraeMyo 2 месяца назад

A cooling fan bundled with the Thermalright PA120 MINI. It is a cooling fan with the model name TL-D12B, and the screw hole specification is different from the typical 92mm or 120mm.

@sobangcha3042 3 месяца назад

2ND!!!

@user-wo9ls4sg7g 3 месяца назад

Big

@mishalw210 3 месяца назад

can nh d15 fit?

@DalraeMyo 3 месяца назад

For NH-D15, it requires a height of 165 mm. The NR200P case supports mounting up to a CPU cooler that is 154 mm high in the spec sheet.

@miksyapan4914 3 месяца назад

Temps?

@DalraeMyo 3 месяца назад

@user-se8rs5vl6l 2 месяца назад

조립 의뢰 가능한가용?

@DalraeMyo 2 месяца назад

저는 PC업계 종사자는 아니라서 따로 조립의뢰는 받지않습니다.

@oRicardoHetfield 2 месяца назад

As a nr200p owner you could get away with a normal PA/PS120 air cooler, it just fits!!!! with the glass panel is a hit or miss with some motherboards! Clean build tho!