212cc Predator Beach Cruiser Race Build

Подписаться 1,1 тыс.

Просмотров 40 тыс.

50% 1

The 212cc Predator Beach Cruiser Build! Had a blast building this at AGK racing and love the bike. Finally put the video together for RU-vid, hope you enjoy!
Feel free to comment any questions or specs on the bike. If you’re looking to do this yourself. Affordable Go Karts .com has great resources and is your one stop shop!
Music credit:
Karl Casey @ White Bat Audio

Развлечения

Опубликовано:

22 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@stubby7934 3 месяца назад

Engine fits like it belongs there....probably the best looking 212 installs I've seen!

@jonb1131 10 месяцев назад

One of the best builds I've seen..

@randallchunn8286 Год назад

That’s a fine build there fellow biker Man !❤

@kennyh5083 5 месяцев назад

Totally AWESOME Dude!

@agkracing140 3 года назад

Turned out to be a very cool bike, especially for a budget build!

@Littleevil9975 2 года назад

I agree sweet build bro

@JTVlogs.247 Год назад

Very cool! I’m building a 49cc 4 stroke right now but would love to build a 212cc next 😎

@Canadian_Craftsman 2 года назад

Nicely done these bikes RIP love my 212 more than allot of builds of done!!😁✌💚

@sasajugovic6984 Год назад

This is amazing,great looking bike LOVE IT with all my heart

@revolvinggarage5425 Год назад

Appreciate it!

@MierCatCustomz Год назад

Cool bike, thanks for sharing!

@eugene5438 Год назад

Nice job and attention to detail.

@johnwebb6017 9 месяцев назад

😮 that thing is sick ❤ very nicely done!! 👍

@mozezcen-valley7555 2 года назад

Really cool nice build

@OliverMotorized 6 месяцев назад

What a beauty!

@warchild1386 2 года назад

YESSIR!! PROPER BAD ASSERY RITE THERE BUDDY!!!

@joneserupinsmoke9161 2 года назад

Yea that's a bad ass build bro👍👍

@wompstopm123 Год назад

aww cute, your dad did all the welding for you

@revolvinggarage5425 Год назад

Aww stick to your keyboard

@RogerTolliver1 Год назад

Nice build !

@qgoods8036 3 года назад

Super nice

@ChristopherJones16 Год назад

That's why I say hey man nice bike. A good bike, man.

@thompsonbrian8791 Год назад

Wish you the best nice ride

@thompsonbrian8791 2 года назад

Nice build

@tomrockhill8634 2 года назад

Very nice. What torque convertor are you using?

@Littleevil9975 2 года назад

Very nice build bro turned out sweet

@revolvinggarage5425 2 года назад

Thank you!

@Littleevil9975 2 года назад

Welcome

@ICXC0 3 года назад

Awesome bike!!! That thing looks fast with those lightweight wheels!! 💨 for those ohv engines how much oil you put into it in the vertical orientation? do you ever have oil issues?

@revolvinggarage5425 3 года назад

Thanks! No oiling issues with the vertical mount. I believe it was the same amount of oil as usual, can’t remember the exact amount.

@glenlarsen8496 Год назад

CAN YOU PLEASE do a list of parts (wheels etc.) List and where you bought from?.....FANTASTIC BUILD!....I AM IMPRESSED

@robertboyer5498 Год назад

Wow. That turned out great. I’ve been thinking about this but I thought you couldn’t mount them upright. What about oil starvation?

@Mac181 Год назад

Dat thing must be fast that motor on a bike I bet it at least hits 50 or more ino the build of the motor and ino with out that performance parts it’s capable of 40

@esesoke 3 года назад

Freaking badass build bro blade 2

@revolvinggarage5425 3 года назад

Appreciate it!

@gametiterecords8683 Год назад

Sheesh I want one😁

@revolvinggarage5425 Год назад

You can do it!

@meme5887 2 года назад

Can we please see a video of you actually ripping it down the street??!

@revolvinggarage5425 2 года назад

I have some videos in tik tok too, same account name

@rolandogonzalez2788 Год назад

Hello, how much oil would the engine take in that position?

@mannyperez9789 3 года назад

Hi love your bike can you do a parts list thank you.

@mbrrideitlikeyoustoleit8436 Год назад

How are those mag wheels holding up against the 212cc? And what’s a good gear racial I’m running a 10 tooth with a 40 tooth in the rear. Should I go up on the rear sprocket?

@zKNitroYT Год назад

I might have to mount mine like this on my cruiser! 😅 right now I’ve got my 224 mounted on the back rack and it’s kinda sketchy lol

@revolvinggarage5425 Год назад

Go for it! Good luck

@justinmedia1776 2 года назад

How much did the build cost for the engine?

@tylerpupo2886 10 месяцев назад

Cool

@fawxa6731 3 года назад

Loved this video. What type of frame is that?

@revolvinggarage5425 3 года назад

It’s a Foose Beach Cruiser

@DAT_BIKE_LIFE Год назад

dude this bike looks awesome i have white cycle mags like that''...will a scwinn beach cruiser handle that engine?

@revolvinggarage5425 Год назад

It’s hard to say really. They have a ton of torque. Appreciate the support!

@theoriginalbingchilling 3 месяца назад

Hi! Very nice build! My question is could you tell me the gear ratio of the drive system? I want to build one of these motorized bikes but I am confused with what kind of gear ratio should I use.

@JAM-zb2vh 2 года назад

I love your bike that's is very nice where'd you get your torque converter

@revolvinggarage5425 2 года назад

AffordableGoKarts.com

@breezetixhv 10 месяцев назад

whats the top speed it can go?

@user-vy9ht7qe6u 3 месяца назад

Y que pasa con la lubrica ion ya que ese motor va de inclinado ya que las dos tapas de aceite se ven muy verticales.

@NguyenReallyDoIt Год назад

How’s the gas tank holding up? How much gas can you fit in it

@secondchancegarage 2 года назад

After a year of ripping on this, how is the motor doing in the vertical position?

@revolvinggarage5425 2 года назад

Haven’t ridden much, but still works as it always has

@Adalbertomatos_ 2 года назад

That frame is genesis 29 inch?

@mortenhansen3455 Год назад

Cool ride! What is the name of the frame?

@revolvinggarage5425 Год назад

It’s a foose beach cruiser, found it on Craigslist

@lerabidheavy7437 11 месяцев назад

Pretty damn nice, build now imagine a properly built engine on that thing

@revolvinggarage5425 11 месяцев назад

It’s plenty of power

@user-mn1nc1ur8v 3 месяца назад

Молодец сделано умно! 🎉

@georgethompson4632 2 года назад

What chain set up Products you have I need the same parts but having Trouble acquiring the parts

@revolvinggarage5425 2 года назад

Check out AffordableGoKarts.com (AGK) all the parts in this bike were from there and sponsored from him

@mariorivasriva7137 Год назад

No hay problema al colocar el motor en ésa posición? De antemano gracias

@revolvinggarage5425 Год назад

It works!

@williamhollie7817 Год назад

How did u determine the proper gears for 50 mph??

@revolvinggarage5425 Год назад

Sprocket calculator website

@Noneyabusinesscoolstorybro 11 месяцев назад

May I ask where did you get your wide crankset?

@revolvinggarage5425 11 месяцев назад

Agk racing .com

@ThatGuyShuuby Год назад

What kind of bicycle is that? I've been having a hard time finding one that will fit a 212cc

@revolvinggarage5425 Год назад

Any beach cruiser that has that open frame will fit. This one is a foose bike

@spacktrax 2 года назад

What's the top speed?

@romandefoart Год назад

Hi! Cool motobike! What's the purpose of jackshaft here? to extend the sproket?

@revolvinggarage5425 Год назад

Yes, and it’s not a straight shot since it’s not level

@romandefoart Год назад

@@revolvinggarage5425 Thank you man for your answer, It will be very helpful if you can tell me where can I buy this jackshaft to assemble it properly, or what elements should I have, thanks

@revolvinggarage5425 Год назад

@@romandefoart i built this bike in house at agk, affordablegokarts.com Check out his website and if you have questions, just email him and and you can let him know about this video for reference. Everything is there!

@romandefoart Год назад

@@revolvinggarage5425 Thanks a lot!

@joshvictoria8937 2 года назад

is it ok to mount the engine vertically

@revolvinggarage5425 2 года назад

Yes

@shaolin224 2 года назад

Table grinder, band saw, welder, and tube bender. Budget build?!

@revolvinggarage5425 2 года назад

Could’ve used a grinder and harbor freight welder and it’d work the same. I have access to tools so I’ll use them.

@victorhernandez1443 Год назад

Hey how are love the bike.hey quick question i have a predator 79cc engine with ported head a 24lb strings . And a torque converter what rear sprocket should I use .BTW I live in florida

@revolvinggarage5425 Год назад

I would use a sprocket converter website. You just type in your sizes and desired speed and it’ll tell you what to use

@haerulrizalpunya 2 года назад

Can you cycle those pedals comfortably when the engine's not running?

@revolvinggarage5425 2 года назад

Yeah, but gear is really high so doesn’t move the bike much. Mainly for leaning and regulation

@beckwerks6817 5 месяцев назад

Wouldn't the gear be readily low with that tiny front sprocket?

@haerulrizalpunya 5 месяцев назад

@@beckwerks6817 that's the problem, small front sprocket on bicycle means low ratio, the pedal is light/easy to cycle but the bike travels very slowly

@beckwerks6817 5 месяцев назад

@@haerulrizalpunya seems like it would be way too low. Have to pedal like crazy to barely move.

@gyredev 2 года назад

what rims are those? Most look like potmetal, dont see those on ebay

@revolvinggarage5425 2 года назад

I found them on eBay, they seem to change often so may be harder to find now unfortunately

@danielrecinos8808 2 года назад

where can I get powerful motors for bicycles?

@revolvinggarage5425 2 года назад

Harbor freight

@roddallison5146 11 дней назад

Yo bro iam building that same bike could v I ask you somebody what you did plesezand thanknyou

@Westhelockpicker Год назад

That's awesome but it would be hard to find a bike with enough room

@darrinfry2251 Год назад

Let's race

@keithdebrine1625 Год назад

Do you know the manufacturer of the wheels you used?

@revolvinggarage5425 Год назад

I got them on ebay

@revolvinggarage5425 Год назад

I got them on eBay

@tytraulich4987 2 года назад

At 9” high with a 8” base I can’t even fit the 49 or 79

@zKNitroYT Год назад

Sounds like a personal problem haha

@abdullaharaby5401 3 года назад

Please parts

@rodneyyoung7972 Год назад

Nice bike peeps don't see the allure of them I just say take it for a ride .lol

@skubefamilychannel 3 года назад

Cool but open exposed chain and sprocket could be dangerous.....😖

@revolvinggarage5425 3 года назад

It’s a bit close, but no problems yet!

@TACOMASRT5 5 месяцев назад

Would you be willing to do a build with one of those Chinese diesel engines?

@revolvinggarage5425 5 месяцев назад

Never heard of them

@shannon6815 Год назад

Lmao that isn't no budget build. Sweet as hell though.

@revolvinggarage5425 Год назад

Got everything as cheap as I could on eBay. Don’t know what else I could do to make it cheaper

@shizzydeep6867 12 дней назад

My Tanaka 50cc would beat this thing all day.

@mark-_-2957 2 года назад

Dear god please don’t ever put your hand/finger in the direct path of a saw blade lol That gave me chills. Hold to the sides please 3:47

@adarkguyproductions4360 2 года назад

"Budget Build" *Uses thousands of dollars in machinery.*

@revolvinggarage5425 2 года назад

Could’ve used a grinder and a mig welder if I wanted to, why would I when I have access to the good stuff

@catsbyondrepair 2 года назад

motor will not hold up in that position

@revolvinggarage5425 2 года назад

lol

@kennyh5083 5 месяцев назад

Totally AWESOME Dude!