220V Spot Welder Review Harbor Freight Pro Point 

Rob, Thanks for taking the time to do that review, I would feel comfortable buying one now after seeing that it actually appeared to work quite well. TP

I have their 110V version in my shop. It is an amperage hog for sure. It frequently (but not always) trips my 20 amp circuit breaker the instant I try to use it. However it runs just fine in my 110v 30 amp circuit. It probably pulls at least 16 or 17 amps. With a longer pulse duration I have welded steel a lot thicker (can we say 2x or 3x?) than in your demonstration with no problems. All spot welds produce an area of weaker metal surrounding the weld spot. For any application where the joint will experience stress, more than one weld spot is recommended. If you are bold with proper safety equipment and precautions and are a little inventive one can easily get carbon steel hot enough (as in white hot) to temper in a bucket of oil a second later with this implement especially if you are willing to cut the end with the weld spot off afterwards. That technique is much faster than my furnace. LoL

Thank you for your review! I almost bought one several days ago, but decided to watch reviews first.

z kiss Another great video. Keep it up. Placing 2 thin sheets of steel on top of the 2 aluminum sheets & increasing the diameter of the welding tips to 1/4" you can make good quality spot welds. A timer is also a must for good quality spot welds.

Hey Rob, I was just looking at picking one of these up at the Dixie Rd Princess Auto, question for you, I'm trying to do some spot welds on a 22g (possibly bit thinner) steel plate to an 11g s/s plate. On the bottom side of the weld, I'm wondering if there is a way to minimize or prevent marking on the bottom side of the weld, I just emailed a company in India about a single sided spot welder (just a gun basically) that have some vids on RU-vid, couple things, shipping may take a long time, the actual machine aside from the hand held gun looks massive, I imagine it would cost a mint to ship aside from the actual cost of the unit is probably pretty high! also concerned about quality / craftsmanship going that route, so I saw your video and thought I'd ask your thoughts on the bottom side weld marks, thanks I appreciate your time.

Also looking at going the 220v route vs buying the 120v on sale for $70 less. What I really need being a Journeyman sheet metal worker is a full on spot welder with long arms, water cooling and air clamp assist. But that's $1500 used minimum. Still paying off my 10' 16g brake, 3' rolls, 3' bar folder, sheer and Pittsburgh machine. So I think this is a decent stop gap. Can fab filter racks, sq to rounds, reducers, boxes and saddles. Severely limited thou by the length of the arms. Also, file your tips to a nice point. Make sure they are aligned. The trick to spot welding is to limit the amount of heat generated melting your copper tips by concentrating all the amperage into the smallest area possible for the shortest amount of time. Focusing your heat not only produces a much stronger weld, it saves your tips, reduces heat internally for your spot welder with much shorter weld times, and your actual spot weld will look 10x cleaner compared to a weld done with fat tips.

I love how honest he is during the separation of metal to test .

A tip for aluminium is to sandwich it between a piece of stainless when spotting

Oh this was golden. I really wish the 110v would do the trick on aluminum. I'm limited to 110v in my apartment, both hobby welders are 110. Loving the information here...

Any thoughts about whether it's possible to modify the arms and make a setup for welding projection style weld nuts? The machines for attaching these nuts have copper threaded cylinders that attach to the arms. Once assembled they pass the current to the base material and the nut in a ring shape and the lower ring has a non conductive cone that aligns the two parts. I'm thinking you could make it out of copper plumbing fittings brazed to the arms.

Any idea how you'd change this to run off a foot peddle?

Does it weld aluminum beer cans?

can weld in any position?

I’ve found that aluminum needs more time because of the high conductivity. Spot welding works because of the large difference in the very high conductivity of copper when compared to that of ferrous metals, which aren’t very conductive. The difference between copper and aluminum isn’t that much. Also, aluminum leaves aluminum on the tips, and needs to be removed or the tips will stick to your welds. I’ve never needed argon gas for this. It’s also hard to give consistent times with your finger and I’ve made a timer for it.

Can you give me link for buy this tool 🙏

to do aluminium best to put a carbon steel on top and bottom as a sanwitch and it will work properly

will it weld automotive body panels - rocker panels -wheel well arches etc...

The electrical conductivity of aluminum is similar to that of copper; it is and much higher than steel or iron. Hence, there is not much heat developed in the case of aluminum.

The aluminum will weld strong if you brush the surfaces you're sticking with a stainless steel brush. Aluminum forms a thin protective oxide layer, aluminum oxide AKA sapphire. You can also use an AC welder which breaks through that layer.

Seems to work okay. Can you hold the workpiece will spot welding without getting shocked

It also runs on 120

I want this one how many price 220 Pakistan

If I'm spot welding 26 gauge galvanized sheet metal, should I use the 120v or 220v?

Could you weld a 1/4-20 hex nut to a flat washer?

can I use a bigger electrode ?

I've worked with automotive spot welding and from what I saw these welds were crap. If this was a good spot weld the samples should have been completely deformed in the process of pulling them apart and the nugget should have been pulled out of the base metal.

This is a good machine for serious metal workers, but it’s too big for young men to use. There should be projects which use light gauge sheet metal, airplane snips, a little press brake, and a cheap spot welder. That way, boys can learn the entire process and make tackle boxes, enclosures, whatever. It might be possible to make a cheap 110v spot welder which is shaped like a hammer, with a point on the end. So you’d hit the sheet metal with the hammer to produce the spot weld. The objective is to keep everything cheap.

Do you have a website? If you do what is it?

Very nice video PS bring back the old hat lol

Hello please can you send help me lm looking for the machine

The 220v model in Canada needs to be hardwired into 220v no plug available

pila dong

Like for used 🧤

Made in china?😳 Jman