223 Trainer Build: My Most Accurate Rifle EVER?

Подписаться 360 тыс.

Просмотров 180 тыс.

50% 1

Full Story: bit.ly/3uiEAUL
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
Few things are as rewarding as shooting the rifle you just built on your lathe. This satisfaction is compounded when your rifle's performance exceeds your expectations! And that is what this video is about: my long-awaited 223 trainer build.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
Precision Matthews
Benchmark Barrels
Bat Machine
Berger Bullets
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 383

@rob1135 2 года назад

That pile of bullets and brass is worth more than a 401K account nowadays…. LOL. Glad to see you are still able to produce content Gavin

@huntersmark917 2 года назад

the lathe he bought is $20,000, upgrading from the $17,000 lathe sitting in the corner. That's pre-tooling cost.

@cheatinggravity173 Год назад

@@huntersmark917 a new quality lathe is sooooo nice! If i had the cash I'd splurge for sure. I mean, you can get a new truck for 40-70k...what would bring you more enjoyment? Lathe for half that for me for sure... priorities😀

@bradthompson3720 2 года назад

I live vicariously through your amazing shop setup, machining equipment, products, and shooting environment. Well done!

@Ultimatereloader 2 года назад

So glad you are enjoying the channel Brad. Thank you for watching!

@siege78 2 года назад

same here! I'm not a machinist or gun smith but have been fascinated by the idea of being able to build my very own bolt gun to the exact specifications I want for the purpose (or just as an experiment) I intend. @Gavin - hope to see you at King of Two MIles some year, would very much like to sit down and have a beer and just chat about rifle building.

@DavidHerscher 2 года назад

Yeah, I pretty much love and hate this guy all at the same time. Love him cause he's living his best life, but also watch all his videos whilst slamming back shots of hater-aide

@tuckerjl 2 года назад

I feel that sense you go into so much detail about the product that you should at least give a ballpark of the prices of each doesn't have to be exact but ballpark would be quite helpful!! Besides that you do incredible work!!!

@Ultimatereloader 2 года назад

Interested in an Ultimate Reloader custom rifle? Sign up on the list here: ultimatereloader.com/rifles/ Hi everyone! Some people have asked "why a 223 trainer?". There can be lots of reasons- removing recoil to train on other aspects of shooting, being able to train with low cost bulk 223 ammunition, barrel life for match gun (Example 6mm Creedmoor- barrel life can be as low as 800-ish rounds). 22 trainers are great, but don't have full bolt throw, etc. I like this rifle so much, I would consider shooting tactical class with it. Each person has their reasons for training with different rifles and calibers. Glad we can respectfully discuss here!

@diywithjonandpebbles 2 года назад

Cost and Ballistically, I’m likely going to run the Bergara B14R and my savage .223 trainer for a few years. I have built up way more reloading supplies for .223 Remington and shoot sub MOA to not justify a bigger caliber until my skills and ability justify a 6 or 6.5 mm class rifle. $3.50 or less for a box of .223 vs $10.80 for a .260 Remington using Lapua brass and ELD-M/X bullets. More reasons TO build a .223 rifle than not. Ballistically, it may be a rainbow arch, but there’s more Ballistically similar using that .223 and if you match that to the 6 or 6.5 chambering, you’ll find they are more similar for adjustments than not. Within their limits. Gavin, there’s another video session for you. Comparing and matching different calibers and ballistics and their dopes.

@lexusowner2924 2 года назад

Interesting reply, though it doesn't hold much weight. Recoil: If you need to remove recoil from a 17-20 lb 6 dasher with a muzzle brake on it by dropping down to a 223, well then you are just a wimp, sorry. Low Cost 223 ammo: Where is the savings? In order to "save" a few cents per round, you are going to spend thousands of dollars again, because remember you've already done this once for your match rifle, on a new optic, receiver, trigger, barrel, match-grade dies, brass, powder, and bullets. Assuming you never wear out that 223 barrel, you'd have to shoot hundreds of thousands of rounds to begin to actually save money. In reality though, that isn't possible, so you will never actually save any money and the whole time you aren't shooting the gun you're actually competing with. Where is the logic there? Barrel Life: If you want to save your barrel life then don't load hot rounds. 6CM barrels burn out at 800 rounds when they are pushed to the max. Load a few grains off max and see what happens to your barrel life. In addition, barrels are relatively cheap. How many barrels could you buy for the cost of that 223 trainer? If you want to shoot it in a tactical class then cool, but that's not a training rifle, that's a match gun for a different discipline. Bolt throw: well, I guess you got me there, a 22LR does not have the same bolt throw as a SA receiver. For me though, its pretty hard to see how spending 6k justifies this one aspect. 223's are fun and I'm glad you're enjoying it, most people do, but the idea that it is a trainer that is going to save you money is just silly. It's another rifle, that's it.

@diywithjonandpebbles 2 года назад

Hornady match ammo is $37.99 a box of 20. I reload it for $3.90 a box. .260 Remington is $65 a box for match ammo. I reload it for $9/ box. Economically, it totally makes sense to shoot a .223.

@72opelmanta 2 года назад

@@lexusowner2924 he is talking about recoil in the sense of keeping the scope on target to spot your shots, not that the recoil hurts his shoulder... PRS shooting is done without a spotter so it's on you to spot and adjust hits and misses... I do agree with you on the part that thousands of dollars on a gun build to save on ammo and wear on a match rifle is a excuse just to build another gun and not a viable financial reason lol

@sakusalo-tuisku4305 2 года назад

The main reason i got a 223 in same configuration with my primary comp gun was the saved reloading time. It's so easy, fast and cheap to just pick up couple boxes of decent bulk 223 and hit the range. Plus i can reload heavier pills for it and use it as a backup gun if i do shoot out my main guns barrel and can't get a new one right away. And it's ton of fun to shoot 😆

@jeffallen3382 2 года назад

Congratulation on this trainer build Gavin! You really do put the "Ultimate" in Ultimate Reloader!

@jasonfiggemeier2499 2 года назад

Bro you have come so far with this channel, been watching since the rpr deer hunting videos and the stuff you build is nothing short of impressive

@Ultimatereloader 2 года назад

Thanks for being along for the ride! I'm having a lot of fun...

@cwreese345 2 года назад

I have a 223 Ackley Improved trainer that is identical in absolutely every way to my 6 Dasher competition rifle. I did the machining and built both rifles myself and both are incredibly accurate. Great video, keep them coming

@lars277 2 года назад

What do you get MV with that Improved. 3400 fps?

@cwreese345 2 года назад

@@lars277 I haven't maxed it out I'm shooting either a Sierra 77 or 80 grain matchking at 2,950 fps. The reason I went with the Ackley is the 40° shoulder, I despise trimming brass.

@MonarchMountainRanch 2 года назад

I have a 223 built by KW Precision and I love it. I'm shooting 80 grain Bergers and it's a dream. Great video!!!

@rafkend1422 Год назад

Amazing Gavin!!! I am seeing you materializing my dream come true with this build. I just finished my frugal version of a build using Howa mini varmint barreled action in .223 and did my second session of shooting. Topped it with a Riton 3X 6-24 scope and a Bell & Carlson M40 style stock. Adjusted the original trigger to 1.5 lb. With handloads of 55gr Hrdy FMJ and 21 grains of 2200 powder I got a group of .310. Very proud of my achievement for someone with seriously depleted physical dexterity and advanced age. However, my most excitement is watching you realize the awesomeness of the .223 and seeing it materialize. Thank you a million from a fellow Washingtonian.

@sambenge9140 2 года назад

If every gunsmith only took this much time and attention to detail…the wait times still don’t remotely add up

@siege78 2 года назад

No doubt!! I had a Tikka built and it took over a year! I'm still wondering if my smith took my barrel for another build and ordered another. I was also supposed to get my original barrel back but never did. I will say so far into load development that its showing good signs for sub 1/2 moa

@huntersmark917 2 года назад

There's no real money in gunsmithing outside of precision work with high end clients. This means most gunsmiths have other sources of income.

@brentwinkelman1990 2 года назад

So satisfying when a rifle comes together...built myself a 223 trainer a while back... definitely fun with no recoil...got some 75gr eldm to try now

@Ultimatereloader 2 года назад

Brent gets it! :) It's an awesome scenario isn't it?

@fjb4932 2 месяца назад

@brentwinkelman, How is that possible ? A .22 Long Rifle has recoil. ☆

@christittle1131 2 года назад

For any the idiots give u slack about the rifle their just jealous they can’t do what you do. Great video as usual. Do you build rifles for people the public if not u need to am sure theirs tons of people out there like me love how much you pay attention to detail and for it to be spot on. God bless!

@captaincripple7218 2 года назад

You do a great job of explaining your processes! there’s something to be said for your ability to simplify something so complex and explain it in a way a novice can understand!

@kenorrah8072 2 года назад

Great to see some .223 content . In this world of latest and greatest cartridges it’s refreshing to see extreme accuracy and Gunsmithing on my favourite usable, accessible and fun cartridge .I will be very interested to see your reloading results . PS - great channel 👍

@bradbarley6639 2 года назад

My brain is in gun technical information overload... But why do I still enjoy watching? 😆 That is SO friggin amazing. Certainly the Ultimate Trainer!

@Marcus2750-u1t 2 года назад

I love this channel! It can’t get any better and Im thankful we get to be taken along on this accuracy journey with you! So thank you Sir!

@agbrown308 2 года назад

Flat out dream build! And that new PM leaves me speechless. I love your content 👍🏻

@MrFelix002 Год назад

this the best channel watch in regards building the most accurate rifle ive ever seen, wonderful stuff

@haganengr 2 года назад

Can't say enough about this .223 effort. Nicely produced video. Impressed with your lathe expertise.

@Ultimatereloader 2 года назад

Thank you!

@h.d.tobybradshaw1464 6 месяцев назад

Great topic, as usual. Best production value of any shooting channel on RU-vid.

@nickmcgee6438 2 года назад

Nice build Gavin. I started with a Savage 12 target action and a Shilen barrel. It's sits in a HS precision tactical stock. It's by far the best shooting rifle I have built. I run the Sierra 77 SMK with IMR 8208 and CCI 450s for awesome dime sized 5 shot groups at 200 yards. Congratulations on your build!

@Ultimatereloader 2 года назад

Awesome results Nick!

@johnshipley9755 2 года назад

Fantastic build I love it, have been working on my own rifle build rimfire the cartridge is 17 Winchester Super Magnum barrel is Encore has 24",1-9 twist.

@theegupper 2 года назад

Really liked the video. Moved from out west where i had access to a 1000 yard range to FL where 600 is all i have access too. Locals advice is to build a 223 trainer to be able to simulate wind calls at longer ranges when shooting out of state. Gonna have to pull the trigger on one. Thanks again for all your work on the videos!

@jackiemeyer2428 2 года назад

This is so up my ally. I have a very similar rifle system with the same ideas in mind. Howa 1500 Short action. 1:9 heavy barrel. Worrior suppressor with Tuner end on it. Nikon 6-24×50 Target reticle scope. AIM comoposite stock. Lapua brass Swift Scroccos 62gn bonded pills CCI BR4 primers Varget Supported by either my Sinclaire bipod or Farley with joystick. Benchrest is my style.

@cz-bundy6896 2 года назад

Damn I need to learn how to start building bolt actions damn! Great stuff Gavin thank you

@brucec2635 Год назад

I'll get one lathe for myself and another for my son in law. This guy is amazing.

@ScottPriestley 2 года назад

Great build Gavin! I'm shooting a 26" 223 Criterion Remage Barrel in a trued Remington 700 receiver with Hornady 88gr ELD-M @ 2800fps using CFE-223. This is actually the first rifle I've used to get to 1000 yds and it's been so much fun! Enjoy your build!

@ScottPriestley 2 года назад

Oh yeah and my loads are only 45 cents a round!

@Ultimatereloader 2 года назад

Awesome!!!

@martinc.4699 2 года назад

I’m making a similar loan, so far pushed it to 2520 fps

@ScottPriestley 2 года назад

@@martinc.4699 What length barrel? Powder?

@martinc.4699 2 года назад

Scott Priestley 26” stabal 6.5

@ianwoodward1554 2 года назад

What a beast of a build, I thoroughly enjoyed it. You have forgotten more about guns, than I know. Very, very informative.

@ronmartblog 2 года назад

Nice!! I’ve been wanting to get a great 223 trainer so I’m crazy jealous!! Awesome 👏🏻 🙌🏻

@glockparaastra 2 года назад

My Remington VSSFII 223 groups exactly the same with 50gr BK. I love it. A higher twist would be ideal.

@G5Hohn Год назад

I had my Forster honed to 0.2445. Works perfectly with Lapua and other brass without overworking. Probably could go bigger, but I use a bushing die for that.

@russvaagen3004 2 года назад

I think I need to have you build me a couple of those. .223 and I was thinking 6XC. Impressive dedication to accuracy.

@terryspooner128 2 года назад

I'll Take two!!! :) That is one heck of a WOODCHUCK rig. :) 1000 yards with a 223 Remington? OMG!!!!!! Hope you succeed get ing out that far and look forward to watching your attempts with that rifle eagerly. :) It'l be soomething to see indeed.

@taps_1021 2 года назад

I would love a trainer like that for my son to train with. Awesome job 👏

@Ultimatereloader 2 года назад

Thanks 👍

@Ultimatereloader 2 года назад

Can you send an inquiry here? We are starting public work very soon! ultimatereloader.com/rifles/

@billylee2312 2 года назад

I’m building a .223 for training purposes. Mainly to get back into shooting consistently. It’s been a while since I’ve put rounds down range on a consistent basis. I’ve never shot long range it’s my goal this year. My sons and I are going down the reloading and long range rabbit hole together. I’m building an M4 and will throw a night scope on it when I have out grown it. We do have a b14 hmr 300 win mag with a sig tango 4 6-24 scope on the way

@GTMGunTotinMinnesotan 2 года назад

I love it man. Just fun to shoot targets with. I have a Savage 12fv that still shoots pretty incredibly tight with match ammo. There's just something fun about a rifle that doesn't recoil much and hits exactly where the reticle is.

@Ultimatereloader 2 года назад

....and this will be a great varmint hunting rig as well!

@dinoc.5537 2 года назад

Well Done! Congrats on the new rig! So glad you gave it a dedicated action over messing with the bbls. I even see a dedicated stock in your future. The rigs are both going to shoot great, so there is no point to swapping things back and forth. Looking forward to the load work and range reports!!!

@dylanschulz2404 2 года назад

I bought a 1440HD from PM about 4 years ago now. Been used almost daily since then. Had to repair some minor things on it, but overall a pretty good lathe! Also like the 223 plan. I put a 1-6 twist 19" barrel on an ar and am impressed with the accuracy and range I can get with the 88 ELD-M bullets. Supersonic out to 1200 yards. Not bad for a 22!

@Ultimatereloader 2 года назад

Awesome!!!! PM lathes rock...

@livezero264 2 года назад

Great build and well presented. I should have pursued more machinist training in my travels. I will have to be content with using barrel nuts, good results so far.

@Ultimatereloader 2 года назад

Thank you!

@lmnhd1971 2 года назад

All I can say is Holy Crap…. I can only dream of accuracy like that. Beautiful rifle, hope to see more videos with it..

@gregpallister8336 2 года назад

You videos are top notch, very detail oriented and interesting to watch. I love your new trainer something you should be proud of. Keep up the good work.

@Ultimatereloader 2 года назад

Thank you very much!

@aklaunch 2 года назад

Hi Gavin, Thanks for another great video. I am eager to see how this rifle shoots at 1000, 2000, 3000, 4000 and 5000 rounds. Those will make great videos!!!

@Ultimatereloader 2 года назад

Thanks, yes this rifle will see a lot of rounds :)

@yellowjacket548 2 года назад

Another great vid Gavin! That build looks like a very enjoyable companion to your 6. Enjoy it!

@stephenjohnson6841 11 месяцев назад

That is way beyond impressive! Thanks again!

@Ultimatereloader 11 месяцев назад

Glad you liked it!

@rgthomson1 2 года назад

Nice build again Gavin, if i were in the US i would be sure to have a rifle built by you, but the gunsmith i use here in Scotland is really good too, keep up the good vids

@Dang_Near_Fed_Up 2 года назад

Watching this only makes me want to build my dream rifle more than ever.

@TigerCarpenter 2 года назад

this build has dropped my jaw, seriously. I was always wondering how to bore such a long hole precisely. I'm waiting for my 1st lathe to arrive, and it is not in that ballpark of precision and rigidity, but your build truly inspires me.

@3Kiwiana 3 месяца назад

My .223 is my favourite accurate rifle as well, and it’s only a tikka t3 with hand loads I get Less than a half inch at 200 yards all day every day. Including cold shot.

@danielmastrangelo3778 2 года назад

This has inspired me to want to build a 223, not so much for training, but just for insanely accurate fun.

@Rejectsocialism 2 года назад

I have a Remington 700 sps varmint in 223. It’s a joy to shoot.

@brazzy1467 2 года назад

My best shooting 223/5.56 is my Uintah Precision 223 Wylde UPR-15 upper. I also reload the 77gr OTM because that's what I used in the ARMY in my MK12. Awesome video.

@sterlingwilkey2124 2 года назад

That would be a awesome rifle for ground squirrels. Awesome, video

@jackiemeyer2428 2 года назад

Wow this such good news. I often think that .223 are like the unsung heros. So I try do everything with mine. Allthough a Howa 1500 in 1:9 twist. I loves 69gn SMKs nut it hard to find. So I am now committed to shooting Swift Siroccos 62gn but with a tuner on. I have used this rifle in 6ppc competitions just for fun. Does pretty good in IBS shooting out to 300m. Now just tune my barred and its off the chase distance. Thank you G for another great post. I sit and wait for them.

@AKGuru4774 2 года назад

The main reason why I'm in school for machining. Just waiting for the day I can grab my own lathe to build a few RUMs

@cheatinggravity173 Год назад

Gavin, coming from a machinist who had to hold .0002" tolerances in the aerospace industry, I have to say you're a quite competent machinist- your attention to detail is commending...very, very few gun builders go to this much trouble to make sure it's right- your results speak for themselves. Excellent accuracy. If you are self taught, that is quite impressive. I only got to the level I did from learning from others in my industry. There is another way to dial in a barrel perfectly true with the axis of the bore, and that is with a "spider" on the rear of the lathe through-bore and a 4 jaw chuck with tiny aluminum soft jaws on the front. Dial in as needed. Tiny (narrow from front to back) soft jaws keep the chuck jaws from putting undue influence on the barrel and possibly warping it through clamping force.

@Ultimatereloader Год назад

Thank you!!! if you look at some of my other Chambering videos, actually use the technique you mentioned with the spider and soft pads with a four jaw chuck!

@cheatinggravity173 Год назад

@@Ultimatereloader You're on it! I shoulda known. Btw Thanks also for bringing quality work to the attention of people that otherwise wouldn't see just how much work (and knowledge) goes into building a rifle that shoots great. Not only does it show them *why* it takes the time it does, it helps gunsmiths justify the price of the labor.

@adamhenley7297 2 года назад

Fantastic video!!!! Very interesting, I love Engineering. I Think the rifle looks perfect. I would definitely have one. In fact, i want one!!!!

@DWhite-el4ih Год назад

Thank goodness you put the brake on.

@Seanconnery1st 2 года назад

This is the best content from you thus far Gavin. I’ve been inquisitive and curious about 223/223AI trainers. I think they aren’t just valid options, but super affordable with precision still in mind. This reinforces this. Thanks! Isaac

@jonprice1623 2 года назад

That is one of the coolest rifles Ive ever seen! Total dream gun! Fantastic work sir!

@Ultimatereloader 2 года назад

Thank you!

@thelarry6864 2 года назад

Very nice job Gavin. We're all jealous, that's for sure. Keep up the great work and I've got 1st right of refusal on that beautiful build! : )

@thelarry6864 2 года назад

Oh, and just the Barreled Action. I gotta T4A Team waiting for it.🤣

@seanmurphy243 2 года назад

I'm doing the exact same thing as I'm watching this, putting together a 223 AI that's very similar to my 260 and 6.5-284 Norma. Hopefully mine is this accurate!

@slamminhawgs9847 2 года назад

nice, im building a 223 and 6.5 creed identical rifles so i have a trainer as well. nice build and groups!!

@boricuaarecibo9259 2 года назад

You're on another level I'm new to reloading and I absolutely love it

@rottanwelding 2 года назад

Nice job! Sure is fun building them..

@Unknown42001 2 года назад

Imagine if he started his own gun business, I would love one of your custom builds

@chucktaylor6057 2 года назад

I wondered how those Berger 77g OTM would shoot. I’m using the 75 ELDM for tactical class but fell in love with the Berger 85.5, just can’t use them in tactical class and wanted some Bergers for tactical. I still love my Valkyrie gas gun also and having an223 bolt gun I had all the components except brass. I’m just doing it backwards, I got the trainer first next comes some version of Creedmoor to run.

@Nick-sx6jm 2 года назад

Check out the 25 creed. Better performance than 6.5 and 6mm creed with better barrel life than the former. A guy has a pretty good video of him shooting it out to 1800 yards.

@diywithjonandpebbles 2 года назад

I got the Bergara B14R trainer to match the savage model 10 I built with shelf parts similar to this and the big horn Origin that will be the .260 and .280 chamberings for my “big gun.” You really shouldn’t enable people like this….LOL. I don’t have the machine shop like you, but the ideas do flow for shelf parts

@Forumrida38621 2 года назад

Awesome video Gavin! I just built a 223 as well with an mpa comp chassis and a 7 twist 26 inch m24 barrel. I loaded up some Berger 85.5 with 8208 and got it to shoot a .21 inch 5 shot group. They are so fun to shoot can't wait to see more on this rifle! Nice work

@Ultimatereloader 2 года назад

Awesome rifle you have! I may have to try some of the 85.5s :)

@Forumrida38621 2 года назад

@@Ultimatereloader if you do make sure you get em close to the lands.. I tried jumping em at like .070 and .120 and they were all over the place. But at .010 they were perfect. Also are you doing customer clambering at all or not quite yet?

@Forumrida38621 2 года назад

With yours being a 1:8 I would try the Berger vld 75 those bullets are awesome!

@dukedenarie5858 2 года назад

Dude I have a feeling you might become a very well known rifle maker. You’re still very young.

@conservativesniperhunter7439 2 года назад

Another awesome precision rifle build Gavin 👍 . Gordy Gritters would agree I’m sure .

@Ultimatereloader 2 года назад

Thank you !!!!

@justink7928 2 года назад

Very cool Gavin. Glad all your hard work and precision played off. Awesome video too. What a great shooting .223. Wish I had one just like that. If you ever felt the need to make another I know 1 fan who'd be thrilled to shoot that out on the farm.

@cliffkirby8570 2 года назад

Awesome! I love a 223, it's a lot of fun to shoot and inexpensive .

@TacticalConsiderations 2 года назад

Wow man. Crazy build

@bomullenaux7468 2 года назад

Awesome video, such high quality and easy to watch. I run a .223 AI that I absolutely love. Cheaper to shoot, good practice, and perfect to train the wife and kids on.

@MrMalicious5 2 года назад

My 223 barrel is also my most accurate rifle. it regularly shoots into the .1"s.

@johnschniederjan1683 2 года назад

Yes that would be my dream gun.

@cornbreadburgess1950 2 года назад

Thanks Gavin for the video, could we see more tech videos,my knowledge is not up to speed,most people want to learn more.Thanks again brother.

@davidwilliams299 Год назад

Love this 223 build and content

@Ultimatereloader Год назад

Thank you!

@ThePigslayer 11 месяцев назад

I’d like to see a dedicated 62 grain 223 green tip project.

@RJ-sr5dv 2 года назад

Well done. Most of us can only admire from afar your talent and equipment… My stock Savage 110FP in 223 9 twist with a 2 oz. canjar set trigger weighs in at 17 pounds. With tuned 73 grain Berger LTB it shoots in the 2s and 3’s Obviously this is a bench gun only. Because of budget constraints it is not only my “trainer”. It my only semi precision rifle. In addition (some 25 years ago) I found a barrel tuner which made chasing the lands obsolete. It’s very satisfying to have a disbeliever sit on a adjacent bench and watch the shot placement through a spotting scope With just a little bragging in mind, I offer this to other like minded BR shooter wannabes as this is a stock action and barrel. I think I have about $400 in the rifle and maybe $150.00 in the trigger. So this sort of accuracy can be had on a budget with some precision load development and about 10 pounds of lead shot filling every cavity in the stock, synthetic stock. I use a Bald Eagle front rest, a flat metal plate screwed to the bottom of the front stock, and side plates on top for the plate to evenly recoil on. Because I am not what you would call “a good shot”….. I take myself out of the equation by When shooting I don’t touch the rifle at all other than the set trigger. It free recoils evenly every time. There is a lot to be said in favor of Savage’s bolt / chamber interface.

@Magnusintro 2 года назад

Awesome work! 👌 similar things happening here in New Zealand with a 223 class being created due to the shortage. How about a video about the oopsies you've had also! Plenty of stories to tell I'm sure.

@JohnSmith-jh1iy 2 года назад

Great work! Im so jelly of your workshop and guns.

@GlennAycock 2 года назад

Gavin, you should consider hosting your excellent videos somewhere more gun-friendly so you can share the build details, or at least sell DVDs on your site! I'm eyeing that Matthew's lathe for a new shop toy!

@Ultimatereloader 2 года назад

Glenn- we are looking at platforms like Rumble to augment what we're doing here. Stay tuned. And yes, you need that lathe!!!! :)

@cadecorneliusen3047 2 года назад

Thank you for sharing, like your video's. They are shooters. I did a build on a remington700 SA .223 trued with Bartlein .224 7.7 twist. Trigger Tech trigger. Shooting Lapua brass, Hornady 75gn BTHP on top of 23.4gns of Varget sparked with Fed 205M. 4 shot groups at 100 average 0.238". Velocity avg is 2785. Can't ask for anything better