No video :(

#262

Подписаться 39 тыс.

Просмотров 34 тыс.

50% 1

▶ FlexBV - pldaniels.com/f...
▶ For links to products used and other information - pldaniels.com/r...
▶ Contributions/Donations - paypal.me/plda...
FAQ FAQ FAwww.facebook.c...
▶ Boardviews and/or schematics? Check out Google; try search for something like '820-00165 boardview badcaps.net'
▶ I use suppliers such as Element14, Farnell, Digikey, Mouser, RS, AliExpress and eBay and a LOT of searching/checking. Undertake your own due dilligence.
▶ YES - I can do custom programming variations of my software to suit your equipment but it will be expensive (certainly no less than $1k USD) because it takes longer than expected and there's always "just one more change".
▶ NO - I do not offer training or jobs
▶ NO - I really cannot answer service/diagnostics questions
▶ NO - I do not do paid reviews; you can send stuff but I cannot guarantee I'll use or like what you send.
▶ Hot air settings: 8mm straight nozzle, 450'C @ 110lpm for laptops, 420'C @ 50lpm for phones ( YOUR environment, method and equipment will be different, so your values will be different )
▶ Soldering iron temperature: 400'C on Hakko FX951 with JS02 tip using 0.015" 63/37 kester solder

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@Chopin03 4 года назад

I don’t even know what’s going on but i watch the whole thing hoping my laptop will miraculously will get fix

@GregM 5 лет назад

Nice catch on that small cap after all that shed work. Got to get those +1 jobs whenever you can.

@pldaniels 5 лет назад

Definitely. Helps make up for the masses of repairs that have gone well beyond the normal 20~30 minute repair window.... especially when they've also ended up being duds (PCH/CPU deaths or in-board failures) :(

@Achabab Год назад

Good job like always

@zx8401ztv 5 лет назад

Smashing that it didn't take too much time/trouble to fix :-D The retainer pin was likely loose anyway, i don't think you did it. I find it odd and funny that alsorts of animals used your shed as a dunny, a meeting of the crappers anonimus group perhaps :)

@Brian-Burke 5 лет назад

Let's go a live video, Paul! Where are you?!?!?

@ginopumadera4265 5 лет назад

Paul your videos are fantastic thanks for sharing, if possible can you do a trouble shooting vid basic level ? Appreciate it

@rajeshgupta11 2 года назад

apple a1502 laptop is proper work and charger light is proper indicate battery is new install. charging show in screen but no increas charging ple slove

@3113ym 5 лет назад

yes It's a critical cap. Nice work Poul.

@janzimny594 5 лет назад

Soon you,ll become Professor Paul Mac Daniels!! Ha ha just kidding mate!

@informediatech-bruno5766 3 года назад

nop soon" PL daniels ENTERPRISES" in our indutry :)

@eclipsebluex 3 года назад

Hello greetings from Panama City. I really like your repair channel. He wrote you because I have a macbook a1502 and it has the following symptoms and let's see if you can give me your recommendation. 1. The laptop gets hotter than 100 degrees 2. Turns off when heated 3. the fan works 4. Shuts down randomly. but only if heavy tasks like video capture are done. 5. Already cleaned and put new thermal paste. 6. The screen was changed, but it has something strange so that it lowers and brightness you have to close and open the screen lid. 7. The battery and hard disk were changed 8. Awaiting your response .... Thank you

@fadelharrak9885 2 года назад

good-morning Paul i'm from france store in cannes sorry i'm stuck on 820-4924-a I changed the smc but no 3v3 voltage on the S0_EDP_SW line resistance next to the smc r5350 an idea I start thank you

@kittyrbw5 3 года назад

Hi I might be confused but I am following along because my Macbook exact one is doing the same thing. In the beginning, you disconnected the battery, then you said to disconnect the daughterboard, ok I did the same. I then plugged in my power supply and the fan started. You looked at yours and said oh it didn't start but to my knowledge, you didn't have any power to the unit correct? Then I tried the keyboard cable and it was the same thing it started again. but you didn't have power to the board right or will it start without it. I guess I am just a confused old lady cause that really threw me.

@kittyrbw5 3 года назад

I appologize I am getting old 60 now I watched again you did connect it you can just barely see it. I was just confused as to how it would start without power but thats why I am watching you because I don't know Hope you rest of the day is a great one.

@billykibakithejamaican Год назад

i have a macbook pro 2014 a1502 m.2 not detected

@mikepeck9260 5 лет назад

Been working on one of these. Have had to replace 4 resistors so far and it powers on now but won’t boot to OS. Slow progress bar makes to end and sits. Same with usb boot and other ssd. Boots right into diagnostic trackpad works. Any commonalities with something like this?

@caincha 3 года назад

I go a similar model that won't power on. Weird thing is charger light keeps orange even without a battery and fan does spin with SMC reset (remove battery, hold power button 10s plug the charger and keep holding another 10s). Other than that nothing. Couldn't seen anything wrong with the board (got a magnifier but no microscope) and yet won't power on...

@bitcrawler 9 месяцев назад

Same here brother

@smalltownpodcast7796 4 года назад

soe tellme where can i make a course about logic boaed weldin plse, in pretoria

@nevinkuser9892 3 года назад

That would be very cool.

@edwinwilson2810 3 года назад

How can I get the service manual. I would like to get for Mac Pro late 2013 ,trash can model

@cooperradke3774 Год назад

Is there a reason for calling it a Macbook Air when the model A1502 Is in fact a Macbook Pro?

@MrPnew1 5 лет назад

Mikro Approved - Meow 😻💕

@Swenser 3 года назад

Just bought a faulty one of these. Owner says after storage no boot. Expecting apple copyrighted corrosion. Do you follow AFL Mr D. Geelong just got their way into the final tonight. Their team song says they are the greatest team of all. They just might be.

@testonly1847 4 года назад

Thanks for nice videos and information, i have same laptop A1502 it's power on when i connect battery and power adapter it's turn on and working fine, but if i remove battery not turning on with power , pls. help me out... Thanks

@qbitsday3438 2 года назад

Great . I would like to know if i can use A1502 Display to A1278 Mac book (LCD is gone looks like a leak ).

@pldaniels 2 года назад

No, they're not compatible.

@emailfilters 3 года назад

1:04 - Sounds like a Louis dig.

@tomcartmill401 5 лет назад

Hey Paul. What cleaner do your use in you ultrasonic?

@pldaniels 5 лет назад

Ambersil from Element 14

@tomcartmill401 5 лет назад

@@pldaniels Thank you.

@donald1056 5 лет назад

Just that SMD capacitor was bad and that's all it took - that little bitty piece shut that laptop down - 5 cents for that

@pldaniels 5 лет назад

Most of the time failures are just itty bitty 0.1~10c parts; the trick is finding them. In this case, the part is somewhat more critical than the more generic decoupling caps and subsequently when it died/disconnected it causes the RTC_G3H circuit to stop working.

@mikepeck9260 5 лет назад

@j.lietka9406 3 года назад

On the A1502, if there is corrosion on the battery connector, can that prevent the macbook from taking power? Thanks those are some good checks I also subbed! 🤓

@pldaniels 3 года назад

Possibly. Depends on which pins. If it's on the I2C lines it's always a risk.

@j.lietka9406 3 года назад

@@pldaniels thanks for the reply! Got a A1502 (retina screen i believe) sorta from a garage sale - as is - have an apple charger but using the magsafe to magsafe2 adaptor. All it does is blink amber!

@ictrepairs6963 5 лет назад

Nobody explained how it is possible that an apparently not shorted cap would prevent the logicboard to boot... I assume that without that smoothing cap it should have booted anyway perhaps... Could the cap had some resistance to ground even if it seems on a first look to be isolated on one side due to the corrosion? How do you explain that?

@pldaniels 5 лет назад

It's a critical cap. When the overall capacitance of the cap falls below a certain percentage due to the damage the internal regulator on the chip cannot maintain stability on that rail and subsequently it will cause issues/failure. In summary, cap went out of tolerance and it's an important cap.

@ictrepairs6963 5 лет назад

@@pldaniels Fair enough Paul! Thanks for the in depth explanation 😉

@Frank-Thoresen 5 лет назад

First thing first. Take a look at Shawn Woods mouse trap channel. Get rid of the mice. I just had a A1502 with the same power up issue. I managed to get the data off it and sent the owner to someone with more experience and microscope (I just need to get hold of one).

@rajeshgupta11 2 года назад

can you help