#268

Подписаться 13 тыс.

Просмотров 17 тыс.

50% 1

After i rearranged and cleaned the workshop, i thought i do a tour.
Signal Generators
FY6900 go.tonyalbus.c...
FY6900 go.tonyalbus.c...
UTG932E go.tonyalbus.c...
UTG932E go.tonyalbus.c...
PSG9080 WhiteLabel go.tonyalbus.c...
PSG9080 Org go.tonyalbus.c...
PSG9080 go.tonyalbus.c...
PSU
RIDEN RD6018 Controller+case go.tonyalbus.c...
RIDEN RD6018 BangGood go.tonyalbus.c...
PSU - AC
Matrix APS7100 go.tonyalbus.c...
ElectronicLoad
Kunkin KP184 go.tonyalbus.c...
Kunkin KP184 go.tonyalbus.c...
PowerMeter AC/DC
DCUU PM9901 go.tonyalbus.c...
DCUU PM9901 go.tonyalbus.c...
Matrix MPM1010 go.tonyalbus.c...
LCR
VC4090 go.tonyalbus.c...
VC4090 go.tonyalbus.c...
ET44xx go.tonyalbus.c...
ET44xx go.tonyalbus.c...
LCR5200 go.tonyalbus.c...
DMM Becnh
Siglent SDM3065X-SC go.tonyalbus.c...
Siglent SDM3065X-SC go.tonyalbus.c...
RF
GPSDO_Display go.tonyalbus.c...
GNNSDO go.tonyalbus.c...
Distributer10 go.tonyalbus.c...
Distributer0-200 MHz go.tonyalbus.c...
FDIS-5 go.tonyalbus.c...
FOS-3 Std go.tonyalbus.c...
RG316 Cable BNC-BNC go.tonyalbus.c...
RG316 Cable BNC-BNC go.tonyalbus.c...
RG316 Cable SMA-BNC go.tonyalbus.c...
RG316 Cable SMA-BNC go.tonyalbus.c...
10M-6PLL go.tonyalbus.c...
10 MHz BPF go.tonyalbus.c...
WB-SG1 go.tonyalbus.c...
WB-SG2 go.tonyalbus.c...
FA-2 go.tonyalbus.c...
FA-2 go.tonyalbus.c...
FA-2 Plus go.tonyalbus.c...
FA-3 go.tonyalbus.c...
LTDZ 35-4400 go.tonyalbus.c...
LTDZ 35-4400 go.tonyalbus.c...
Azeroth Si5351 (0.5-140 MHz) go.tonyalbus.c...
Nvarcher AD9834 (0.05-40 MHz) go.tonyalbus.c...
Sweeper AD9954 (0.05-200 MHz) go.tonyalbus.c...
ADF4351 go.tonyalbus.c...
ADF4351 go.tonyalbus.c...
MAX2870 go.tonyalbus.c...
MAX2870 go.tonyalbus.c...
TinySA go.tonyalbus.c...
TinySA go.tonyalbus.c...
RF Gen go.tonyalbus.c...
RF Gen go.tonyalbus.c...
RF Gen go.tonyalbus.c...
RF Tester go.tonyalbus.c...
RF Tester go.tonyalbus.c...
50_Ohms-BNC go.tonyalbus.c...
50_Ohms-BNC-inline go.tonyalbus.c...
50_Ohms-BNC-inline go.tonyalbus.c...
Attenuators go.tonyalbus.c...
Attenuators go.tonyalbus.c...
Ref/Standard
Volt ref AD584LH go.tonyalbus.c...
Volt ref AD584KH go.tonyalbus.c...
Volt ref LM399 go.tonyalbus.c...
Volt/Current Pro LB02A go.tonyalbus.c...
Volt/Current Pro LB02A go.tonyalbus.c...
DMMcheckPlus go.tonyalbus.c...
Volt/Cur FNIRSI SG003A go.tonyalbus.c...
Volt/Cur FNIRSI SG003A go.tonyalbus.c...
LCR standard go.tonyalbus.c...
DMMShort go.tonyalbus.c...
DMMShortPro go.tonyalbus.c...
Solder
Aixun T3A go.tonyalbus.c...
C245_tips go.tonyalbus.c...
T12-956 go.tonyalbus.c...
T12-956-Kit go.tonyalbus.c...
ELESHOP
Brymen BM867s eleshop.tonyal...
Brymen BM869s eleshop.tonyal...
Brymen BU-86X USBKit eleshop.tonyal...
Bench DMM
Owon XDM1041 eleshop.tonyal...
Owon XDM2041 eleshop.tonyal...
Owon XDM3041 eleshop.tonyal...
Owon XDM3051 eleshop.tonyal...
Siglent SDM3045X eleshop.tonyal...
Siglent SDM3055 eleshop.tonyal...
Siglent SDM3065X eleshop.tonyal...
Scope
Owon SDS1202 eleshop.tonyal...
Siglent SDS1202XE eleshop.tonyal...
SpectrumAnalyzer
SSA3021X-PLUS eleshop.tonyal...
PowerSupply
Siglent SPD3303XE eleshop.tonyal...
Matrix MPS-3206 eleshop.tonyal...
Matrix APS-4000A eleshop.tonyal...
Matrix APS-7100 eleshop.tonyal...
Matrix MPM1010 eleshop.tonyal...
Matrix MCR5200 eleshop.tonyal...
Desk:
DeskLampMagnifier go.tonyalbus.c...

Наука

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 198

@MrCarlsonsLab 2 года назад

Hi Tony. Looks great! Thanks for the tour of your lab.

@TonyAlbus 2 года назад

Thank you Paul!

@SoddingaboutSi 2 года назад

@@TonyAlbus See, he's watching you!

@TonyAlbus 2 года назад

@@SoddingaboutSi Yes :) , i think all TE lovers are watching each other, just to see if there is something special found

@M5AXA 2 года назад

@@TonyAlbus Anyone who gets recognition from Paul Carlson has my upmost respect. Well done Tony. 73's Ian M5AXA

@TonyAlbus 2 года назад

@@M5AXA Thank you Ian, that is very nice of you!.

@user-zx1gb2pf1f Месяц назад

Hi Tony, I'm Roberto from Northern Italy, I signed up because I think you're a special and worthy person, your simplicity is remarkable. I watch your videos with great interest and pleasure, it seems like I'm seeing my Laboratory where I almost have no space to move and everything is put here and there .... but I always find everything. Congratulations, always keep it up with great simplicity ...... Good Everything Bye R.

@TonyAlbus Месяц назад

Thank you so much!! Messy does not matter if you can find all you need... greetings!

@teotwaki Месяц назад

I'm late to the tour but the title made me laugh out loud. It's the same for any picture I share of my lab. A moment in time of a rare but much needed cleanup.

@TonyAlbus Месяц назад

Thanks!! yes we all know that feeling :)

@margrethealbus1139 2 года назад

Ha ha, super clean and tidy 😅☀️🍀☺️

@TonyAlbus 2 года назад

Thank you!

@roelandriemens 2 года назад

Waar de kratten van AH al niet goed voor zijn. Een echte Mr. Carlson hobbyzolder. Het zal wel lekker warm zijn als alles aan staat. Groeten uit Houten.

@TonyAlbus 2 года назад

Dank je, je perfecte kratjes. erg warm, heb niet vaak alles aan hoor. 1300 watt :)

@que_- 4 месяца назад

Wow, I´m absolutely impressed.You don´t need any heating in this room.

@TonyAlbus 4 месяца назад

Thank you! .. yes nice and warm :)

@chevylization 2 года назад

Amazing collection of equipment, top of the line and the finest of the finest. For sure that maintaining such amount of gear is not an easy feat and certainly not for the faint of heart. I had to pause at 8:55 , that Keithley family is just breathtaking. Your obsession for precision is admirable.

@TonyAlbus 2 года назад

Thank you Sir, that is a very nice comment.

@JohnUsp 2 года назад

Impressive, congratulations.

@TonyAlbus 2 года назад

Thank you!

@renepc2c937 2 года назад

And now the big challenge: keep it that way !!!

@TonyAlbus 2 года назад

That battle i will lose :)

@Testequip 7 месяцев назад

A beautiful lab set up Tony. I'm envious!

@TonyAlbus 7 месяцев назад

Thank you!

@sbelectronicaindustrial6652 2 года назад

Hi Tony, very very good your laboratory... Cordial greetings, from Buenos Aires.

@TonyAlbus 2 года назад

Gracias ! Thank you Sir

@janmoerkerken3202 2 года назад

Nice place, fantastic collection.

@TonyAlbus 2 года назад

Thank you

@Edisson. 2 года назад

Hi, very beautiful layout in such a small space. 👍 Nice day 🙂Tom

@TonyAlbus 2 года назад

Thanks Tom!

@Edisson. 2 года назад

@@TonyAlbus To praise such a beautiful workplace it goes well, the equipment is absolutely amazing and in beautiful condition. After my workshop was robbed, I have a workplace that is 100 times smaller than you, I lost all the equipment and I am building my new workplace in the niche of our bedroom. Assembling some decent equipment is not a cheap affair in the Czech Republic and to place it in such a small space as I have available is the complete Tetris. We also have the same devices - PSG 9080 and Siglent SPD3303 I have version X, thanks to you and me OCP works, I did not solve the update and when I saw your video with the update fw I made it too and great, only after the update is in series instead of 64V only 60V. Thank you very much for the videos you create, I wish you much success and a beautiful weekend 👍🙂

@TonyAlbus 2 года назад

Thank you too Tom, good luck on your rebuild of your lab.

@grerlab2777 2 года назад

wow...great beautiful lab...very clean and inspiring... Thanks...

@TonyAlbus 2 года назад

Thank you!

@markgreco1962 2 года назад

WOW What a show!!! Thanks Tony

@TonyAlbus 2 года назад

Thank you Mark!

@user-pw8ps4ty7j 2 года назад

Amazing collection!

@TonyAlbus 2 года назад

Thank you!

@Stephen_Heathcote 2 года назад

Excellent 😊.

@TonyAlbus 2 года назад

Thank you Stephen!.

@driverfilmsshortwavechannel 2 года назад

Nice tour of the work shop!

@TonyAlbus 2 года назад

Thank you!

@jwrtiger 2 года назад

Tony, thanks for the tour... very nice.

@TonyAlbus 2 года назад

Thank you John!

@davidv1289 2 года назад

What a neat lab and well laid out too. Thank you for showing it to us. I have an HP 5315B counter and after your recent video on the Vectron OXCO modules I built a new internal reference for it. Very stable now when checked against GPS! Regards, David.

@TonyAlbus 2 года назад

Thank you, that sounds good, nice project.

@bradclancy6069 2 года назад

Looks great!!! Well done, sir.

@TonyAlbus 2 года назад

Thank you Brad!

@thecoffeeblog 2 года назад

You have beautiful and rare gems in your collection. I wish I could go all the way like you did. I have one oscilloscope, 2 adjustable power supplies, one electronic load a bench DMM and 5 handheld DMMs . I feel out of control. However, you own a full toy store. Thanks for the tour. I love your channel !!

@TonyAlbus 2 года назад

Thank you so much! it is not the number of items, its how you like them!.., you have a nice collection too

@thecoffeeblog 2 года назад

@@TonyAlbus No way, I am still missing the Keithley 2002. ;)

@Frank_K4FMH 2 года назад

I love this open-house, Tony!

@TonyAlbus 2 года назад

Thank you Frank!

@Codeeze 2 года назад

Fantastic collection and arrangement of gear there Tony, really amazing. Now you have much more time on your hands, you can come and sort my workshop out for me. I'll put the kettle on. See you soon.

@TonyAlbus 2 года назад

Thanks Paul!!

@TheToothlessruthless Год назад

now that's a lab wow. love it

@TonyAlbus Год назад

Thank you!

@RandallDibble Год назад

A Proud Gear Hound !

@TonyAlbus Год назад

Thanks! yes i am :)

@TheBrforsberg 2 года назад

I have been watching your channel for a couple of months now. Very impressive tour.

@TonyAlbus 2 года назад

Awesome, thank you!

@ducciom.gasparri9727 Год назад

Great lab! Your comment about area versus depth in storing electronic components really made me think about the little plastic boxes. I'm about to redesign my small lab and I think I will follow your example, a lot more efficient than what I had in mind. Thank you for sharing it!

@TonyAlbus Год назад

Thanks, glad it can help you!

@hansjrnandreasen5867 5 месяцев назад

Great lab

@TonyAlbus 5 месяцев назад

Thank you!

@andrewgeorgelang 2 года назад

Just what your channel viewers secretly wanted to see Wow very clean and professional looking lab Tony Wont lie, bit jealous buddy LOL Thanks for sharing

@TonyAlbus 2 года назад

Thank you Andrew!

@sv7gbr 2 года назад

Great lab Tony, congrats, also nice tour for me, 73 Manos.

@TonyAlbus 2 года назад

Thank you Sir!

@mauabalancas4813 3 месяца назад

❤uau Parabéns Tony, tudo muito lindo. Abraços do Brasil

@TonyAlbus 3 месяца назад

Gracias! saludos!

@poseidoneyt Год назад

As if to say you have everything you need, and always exciting to see this instrumentation.But the most surprising thing is the order you have!!! Greetings

@TonyAlbus Год назад

Thank you!

@joseabrahaoabrahao7937 Год назад

Você tem um laboratório incrível.

@TonyAlbus Год назад

Gracias!

@340dave Год назад

Quite impressive! 👍

@TonyAlbus Год назад

Thank you! Cheers!

@allthegearnoidea6752 2 года назад

Great workshop tour and some amazing test equipment. I’m amazed you don’t blow a fuse with all that gear running

@TonyAlbus 2 года назад

Thank you Chris… i build the electrical system myself.. and use nails for a fuse :)

@Andrewausfa 2 года назад

Excellent tidying Tony! It should be an Olympic Gold medal for you :)

@TonyAlbus 2 года назад

Thank you sir.

@dist67 2 года назад

Very cool, thanks for the tour! :-) I have one problem thought with videos like these: me thinking "oh, I want that too! and that, I need one just like that ... oh, and that tool!" 🙂

@TonyAlbus 2 года назад

thank you… yes me too, i watch also others :))

@na5b 2 года назад

Nice and clean bench. I try my bench like this too but doesn't stay clean for long! 🙂Keep up the good work.

@TonyAlbus 2 года назад

Thank you!

@debbymolenaar1724 2 года назад

Je zoldertje ziet er strak uit Tony, wat je daar allemaal niet kwijt kan. Prachtig stekkie, zou ik zo zeggen👏👏👏

@TonyAlbus 2 года назад

Dank je Debby!

@RixtronixLAB 2 года назад

Nice video, thanks for sharing :)

@TonyAlbus 2 года назад

Thanks for the visit

@tecnisdaimondm.g9321 11 месяцев назад

Impresionante 😊😅

@TonyAlbus 11 месяцев назад

Gracias amigo!

@mostlypostie1 11 месяцев назад

Awesome! Thanks for the tour! However I was hoping to see your radio collection?! Maybe next time 😁👍

@TonyAlbus 11 месяцев назад

Thank you!, in the 2023 tour i will show more radios too. thanks for the feedback!

@mostlypostie1 11 месяцев назад

@@TonyAlbus when I catch a glimpse of that nice old Realistic RX, I know there is some cool stuff hidden in that lab 👍

@TonyAlbus 11 месяцев назад

@@mostlypostie1 Sorry the DX-394 has been sold, but i do have in my video archive on comparing DX-394, Icom R72 and Yaesu FRG-100 side by side just before i sold it. i will mix that in somewhere in a video.

@MkmeOrg 2 года назад

Great tour Tony. Gave me some great ideas.

@TonyAlbus 2 года назад

Thank Eric!

@mrbambix 2 года назад

great tour Tony, i finally ended up cleaning my shack space as well and now can start working again lol But not nearly as much great instruments as you have but enough to enjoy my hobby. Keep em coming Tony thanks for your videos!

@TonyAlbus 2 года назад

Great work!.. Thank you!

@CyberAlien 9 месяцев назад

Amazing lab!

@TonyAlbus 9 месяцев назад

Thanks!

@gregreynolds5686 2 года назад

Very interesting to see such a lot of vintage test gear - it would be really interesting (although a lot of work) to compare the different schematics for older equipment, e.g. comparing how frequency counters worked between generations, or how volt meter implementation changed.

@TonyAlbus 2 года назад

Thanks Greg, that would be very interesting,.

@kamikazekk-df4vz 2 года назад

You've some pieces I'm looking on the market from a little bit of time..... Anyway congrats, very beautiful collection and to be honest I'm happy to see all this stuff in great/functional conditions.

@TonyAlbus 2 года назад

Thank you!

@Ringer1982 Год назад

Hi, I randomly found this video and was watching it when my wife was around: wife - Omg, is that where we are going to? (talking about the amount of gadgets)... Is he from the Netherlands? me - No idea, how do you know? wife - Those are boxes from Albert Heijn I went checking to the channel's page and yes she is right :D

@TonyAlbus Год назад

LOL, correct AH Kratjes.. yes most of my viewers end up with a lot more equipment, so be warned :)

@marcinmakowski256 Год назад

Wesołych świąt Tony, wszystkiego najlepszego i najfajniejszego, Marcin

@TonyAlbus Год назад

Thank you Marcin, Merry Christmas to you too, and good health in 2023

@dalerobinsuk 2 года назад

Thanks for the tour, it was nice to see around the workshop. I have seen that Kenwood TH-D72 in a few of your videos, great radio. I have the TH-D7E (G) but would love to get a D72 when I find one cheap.

@TonyAlbus 2 года назад

Thanks Dale, that is correct its a TH-D72 well spotted.

@LehimLAB Год назад

I like your content very much. And i'm trying to one day have a nice LAB as yours 👍👍 I look forward to your continued success Tony Albus 💥

@TonyAlbus Год назад

Your lab looks nice too, i subbed. good luck with your channel!

@LehimLAB Год назад

@@TonyAlbus I'm so happy for this ❤Thanks so much !!!

@zdzisiek1979 2 года назад

WOW ładny zbiór mierników , po za tym ładny warsztat :)

@TonyAlbus 2 года назад

thank you!

@manoelmoura682 11 месяцев назад

nice labs

@TonyAlbus 11 месяцев назад

Thank you!

@KeritechElectronics 2 года назад

Lovely lab, and nice idea with those Ikea rolling cabinets. Serves the recombobulation very well. That's a real pro workshop for sure! So much test equipment - I'm impressed and envious. Wish I could visit you and work together on some projects. Maybe when I go visit my friend in NL again? Ha. BTW the first thing I noticed was that there was something off with those nixies in the start. Good that you have a lot more real deal nixies in your gear :) Also got a Weller TCP-S iron (got it from my friend who no longer used it), but no station.

@TonyAlbus 2 года назад

Thank you very much!

@tablatronix Год назад

interesting lead/cable organization

@TonyAlbus Год назад

Thank you! .. it was there so why not use it. :)

@adfalmeida10 Год назад

super

@TonyAlbus Год назад

Thank you!

@TestEquipmentAnonymous 2 года назад

Wow, Tony! Your lab sure has grown since you caught TEA. Sorry. :P Great job with the cleaning and organizing. Thanks for the tour!

@TonyAlbus 2 года назад

Yes some would say it has gotten out of control :)) Thanks!

@markuskeller9734 2 года назад

Man, this is an awesome collection. You're really into it. Impressed. What a massive and stunning collection of good & great old electronic devices. So far, I only have a few old but very good ones like the HP5316B and HP5384A Frequency Counters or a Fluke 8824A Multimeter still in spec after 25 years. Takes quite some time to find such devices being in a good shape and still for a reasonable price. People go crazy on Ebay trying to sell real garbage (scratched, damaged, dirty) for unreal prices. But that's part of the "hunting game" ... :) Otherwise I have a lot of the newer test gear in my lab, mostly from Siglent, Rigol, Keysight, Aim TTi, which are good brands for the Hobbyist. Thanks for sharing and posting your videos. Good content and good reviews. I watched quite a few already. Keep up your good work, man. Thumbs up!

@TonyAlbus 2 года назад

Thank you! you seen to have a collection yourself too! yes agree tti makes good quality.

@MarioRiesebeek 2 года назад

Mooie collectie Tony! Blijf vooral dit soort video’s maken!

@TonyAlbus 2 года назад

Dank je Mario!

@nickking8317 11 месяцев назад

Cool lab mate I guess you’ve been doing it a lot longer than I have as I’m just starting out. I’m jealous

@TonyAlbus 11 месяцев назад

Thanks Nick, yes years of collecting. Have fun with collecting and playing, we have a great hobby!

@vincentnonnenmacher9352 2 года назад

Nice !!! So small space, you stuff so much volt and time nut here :-) Guess it won’t stay as sorted when you start any projects and that should be a burden !

@TonyAlbus 2 года назад

Thanks :)

@123jogger123 2 года назад

Beautiful Shack :-) Hehe, did you ever measure the standby current when all instruments are only switched on? ;-)

@TonyAlbus 2 года назад

Standby is about 60 Watts, but i switch it all of when not there

@123jogger123 2 года назад

@@TonyAlbus Oh, that's less than I expected But looks great, even in the dark ;-)

@TonyAlbus 2 года назад

yes great in the dark :))

@PY4SR 2 года назад

Very nice… Advanced TEAS (test equipment acquisition syndrome) stage, for sure! I was also (self) diagnosed… my lab is smaller and I could stay there days and days… repairing, designing, testing, experimenting etc. with respect: what do you do for living? What’s your strategy for time management, to council job and lab life?

@TonyAlbus 2 года назад

Hi Rob, clearly you are a TEA brother :) .. i work fulltime but use 2 days a week to 'play' in my lab

@markgreco1962 2 года назад

Tony, at 15:42 the drawers are different from the HELMER drawers in the beginning. Are they IKEA?

@TonyAlbus 2 года назад

At 15:42 that are proper office drawers, not IKEA, well spotted

@user-kg9py4yc1w Год назад

🤩👌👌👌🙌

@TonyAlbus Год назад

Thank you!

@wilcostienezen9403 2 года назад

Mooie verzameling inmiddels, hoe lang heb je er over gedaan?

@TonyAlbus 2 года назад

Dank je, 30 jaar

@mrocklewitz 2 года назад

Now i need to reorganize. But im b*lls deep in a 3d printer upgrade. Sh!t everywhere 🤣

@TonyAlbus 2 года назад

Good luck on that, yes that can be a rabbithole

@mrocklewitz 2 года назад

@@TonyAlbus thanks. A good friend sent me a beautiful gift. A tooling grade aluminum bed. Its milled perfectly flat and absolutely beautiful machining. So i ordered up a 600w 24v meanwell psu and 300w silicone heater. Monster mosfets. Since i didnt go with an ac heater, i cant use a normal method of a thermal cutout safety fuse in line to the heater. So im coming up with a thermal cutout solution for the whole printer. A safety circuit. Using a standard ceramic thermal cutoff and a 30 amp opto isolated relay....its gonna act as a contactor for the mains power to the psu. Thermal fuse pops, relay opens. Printer dies. I like ur lab. I need more room

@TonyAlbus 2 года назад

@@mrocklewitz Sounds great.. build like a beast! , i need to play more with my 3DP .. but time...

@thorstenmoller4305 2 года назад

Well, let me ask the inevitable question that seems no one dares to ask. How much did you pay for all that stuff, and how much time did it take you to find and get them? Would you share that numbers with us? Anyway, impressively efficient use of a limited amount of space!

@TonyAlbus 2 года назад

Thank you, 30 years, never spent a dime.

@dennisqwertyuiop 2 года назад

looks like my bench 16 feet long 4 feet high loaded

@TonyAlbus 2 года назад

Don't think about floor load per m2 :)) (or feets)

@dapenguin2 Год назад

Hey I see that oscilloscope in the back - Philips PM 3230, I have one too! My first oscilloscope, pretty banged up and grungy but only $50 and so cool :D The plastic on my knobs are all cracked and falling off, do you know where I could get new ones for it?

@TonyAlbus Год назад

Oh yeah that Philips, have it at leats 30 years... i think one channel broke... this scope is great becouse it has 2 seperate channels and not multiplexed, dual beam i think its called. do not know whare to get the buttons.

@tonyweavers4292 7 месяцев назад

Wow! I love your setup. I am just starting my Ham Foundation course. Can I use a Meanwell 25 Amp SWPS for Radio power or do I need only Linear?

@TonyAlbus 7 месяцев назад

Thank you Tony! 25 Amps is just about enough for 100 Watts HF and Meanwell is one of the better PSU's but myself i prefer a SMPS with noise offset, just to be sure. and 30-35 Amps ..those are made for Ham use

@sammin5764 2 года назад

🌹🌟🌹

@TonyAlbus 2 года назад

Thank you!

@igorb4650 2 года назад

Thanks for the tour! What is desoldering station at 6:58?

@TonyAlbus 2 года назад

Hi Igor, i think these come close , i like it, nice prized works well DeSolder go.tonyalbus.com/desolder_A DeSolder go.tonyalbus.com/desloder_B if you live in EU you can also find it at ELEshop.eu www.eleshop.nl/zd-8915-desoldeerstation.html

@mrpetit2 2 года назад

Grappig als je naar je eerste video's kijkt; hoe leeg je workbench nog is 😁

@TonyAlbus 2 года назад

Ja lache he.... wanneer loopt iets uit de hand :)))

@HawkASTRO Год назад

Hi Tony. Love your videos !!! Quick question - I have the ADF4351 LCD signal generator. It works fine - but the LCD goes blank after some minutes. The output is still there - but I need to power cycle to see the screen again. Have you seen the same problem ?

@TonyAlbus Год назад

Hallo Steve! thanks. Mine does not have it, it stays on, is it a screensaver, is there a setting, or it goes off and locks? but no, mine stays on.

@HawkASTRO Год назад

@@TonyAlbus Hi Tony - the screen goes blank and unresponsive - so if it's a screensaver it cannot be awakened. The software (PLZ-PLL-ADF) doesn't 'wake up' the display either - so I think it is a fault.. BTW - I am about to attempt the external clock reference mod as shown in video #112. I have a Rubidium Frequency Source set to 10 MHz. Your videos are very informative and useful. Thanks !!!

@vckrijt 2 года назад

altijd weer inspirerend Tony! , where did you get the component drawers from? type, size? Tx

@TonyAlbus 2 года назад

Thank you. kantoormeubelen4sale , 15drawers 28x86x42 bxhxd you will need to add the plastic drawers yourself, i used my old ones from my plastic racks

@M5AXA 2 года назад

OK Tony, I know test equipment has a fairly low current draw especially when not loaded. But I would love to know what you total current draw was for all those devices that were powered on during the video. One other question, Is that loft space above a house or a business ? 73's Ian M5AXA

@TonyAlbus 2 года назад

Hi Ian, i think if all is switched on it is about 1000 Watts , but its is never all on. it is on my attic where 'normal' people store there old suitcases and tents and stuff :)

@M5AXA 2 года назад

@@TonyAlbus That is very reasonable. I too have taken over my attack as a electronics lab however I have far less diagnostic equipment than you !. I do have a radio shack is in the spare room.

@TonyAlbus 2 года назад

@@M5AXA Hallo Ian, thank you for the Coffee, i will enjoy!.. i think i saw a picture of your shack on QRZ . COM .. very nice and tidy !

@ahmedalshalchi Год назад

You have great lab instruments ... The question is how much do they all cost and how could you afford all that ??!!

@TonyAlbus Год назад

Thank you sir, 35 years of collecting.

@wa4aos 2 года назад

You need to join TMTEA, Too Much Test Equipment Anonymous. It's a 12 step RECOVERY program for us engineers who are obsessed with high quality test equipment. Just like AA but for engineers and super techs. See you at a meeting soon. LOL BTW Did you see the new Siglent Spectrum analyzer ??? Upsssssc, my bad !!!

@TonyAlbus 2 года назад

LOL .. Yes see you there :)) not sure i want to recover..

@vincentnonnenmacher9352 2 года назад

Do you get your hands on the rhode&scharwz double +/_40V precision supply ?? Got one (with abused resistors) but never found any service/user manual for it.

@TonyAlbus 2 года назад

Hi Vincent, i did found it, a guy from EEVblog shared it with me i can share it with you, i was going to share it when posting the video.

@vincentnonnenmacher3562 2 года назад

@@TonyAlbus great news, I'll look on EEVBlog then and perhaps post some photos (of the burnt resistors), thanks you !

@TonyAlbus 2 года назад

@@vincentnonnenmacher3562 In the about section of my channel you find my email.. i can email it to you if you contact me

@barrybogart5436 2 года назад

What do you use the Kenwood TH-D7 APRS HT for?

@TonyAlbus 2 года назад

Hi Barry, TH-D72E if i am correct :) .. i use it when mobile, the fam. can check were i am... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-abdf7KbrtAo.html my video about it, just before i travel. i did not use it for a while i must say here.

@Qazwsx-sr3yy 3 месяца назад

If you put electronic devices side by side, don't they get hot? Wouldn't it damage the devices?

@TonyAlbus 3 месяца назад

Most devices can keep themselves cool or at the designed temprature. but a big but. the lab needs to be 22-24 degrees C .. that last part is difficult in my attic, so most of the time only the used devices are switched on.

@juancarlos-np2hq 4 месяца назад

Este. Señor. Arregla ovnis

@TonyAlbus 4 месяца назад

Yes :)))

@pe1owg439 2 года назад

Am i blind or didn't you ever post a test about the hackrf portapack? IT does rx/tx 1-6000MHz

@TonyAlbus 2 года назад

Hi, you are correct, i have not showed it on my channel, i don't have one yet. i am hoping someone will send it, as i did not buy one yet myself.

@pe1owg439 2 года назад

@@TonyAlbus mine is sadly broken @moment , you can do a lot of fun stuff with it,aprs sstv analoge tv adb-s AM FM.ssb radio wifi bt etc 73 pe1owg

@user-sd1ur4bn2r 11 месяцев назад

Недавно подобный гараж в металлалом сдавали Тоже мужик копил

@TonyAlbus 11 месяцев назад

Ahw...that hurts when that is done, sometimes that happens when the leftover family have no glue what all the equipment is worth. i hope the guy himself enjoyed it as long as he could.

@user-sd1ur4bn2r 11 месяцев назад

Да все верно детям пофиг что да как (( Прикинь мне ручками своими пришлось разберать жалко пипец@@TonyAlbus

@TonyAlbus 11 месяцев назад

@@user-sd1ur4bn2r See true indeed