No video :(

2D Sketch Constraints, A Beginners Guide | Inventor & Fusion 360

Подписаться 85 тыс.

Просмотров 226 тыс.

50% 1

A beginners guide to what 2D Sketch Constraints are, why they're there, and how you use them. This is performed entirely on Autodesk Inventor however the majority of this is also applicable to Fusion 360 also, which has an almost identical sketch constraint behavior engine.
===================================================
Inventor might be on discount... check out the Autodesk store links below
Don't forget to change the store country at the top right of the website! If you're located in the ANZ region (Australia & NZ) please use the links marked AU & NZ... (refererral link)
Autodesk discounts & promotions: bit.ly/Autodes...
Autodesks Entire Pricing Page: bit.ly/Autodes...
Try Fusion 360 or Buy: bit.ly/Fusion3...
(AU & NZ) Current running Autodesk discounts & promotions: bit.ly/Autodes...
(AU & NZ) Autodesks Entire Pricing Page: bit.ly/Autodes...
------------
If your region isn't shown, click any link and you should be redirected.
3DConnexion CadMouse (Amazon UK): amzn.to/2Km1HpP
3DConnexion CadMouse (Amazon US): amzn.to/2GTivSV
3DConnexion SpaceMouse (Amazon UK): amzn.to/2Xc8eIG
3DConnexion SpaceMouse (Amazon US): amzn.to/2CMmiis
------------
#Tech3D #Engineering #CAD

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@Neil3D 7 лет назад

Dear all!! - if you're looking for a good computer to run Inventor, you may then be interested to know that I have now developed and released the worlds most comprehensive FREE benchmarking test for Autodesk Inventor with a global online leaderboard. See the announcement video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xck3lvuMRjM.html and check out the leaderboard here invmark.cadac.com/#/ =========== You lot kill me, I completely forgot about and missed G2 Smooth, realised my omission during editing, decided it's probably just as well as it's too advanced to be on a beginners vid, roll with it, and then that's the first thing that gets picked up on!! Ha. I'll do a dedicated G2 Smooth vid separate to this one :)

@tia-8802 7 лет назад

Why is it called G2?

@jazzGT 7 лет назад

It's a condition of mathematical continuity of a function. G2 implies that the two lines touch at a point, have the same first derivative at that point, does the same slope and have also the same second derivative... that is... the same curvature... hence that's why you call it G2... Check out this link: docs.mcneel.com/rhino/5/help/en-us/popup_moreinformation/continuity_descriptions.htm

@jasminejones4495 3 года назад

Advantage up plank Co o beg

@storm8986 2 года назад

don't care it's been 4 years, u helped me more than you can imagine friend.

@anthonygarcia1762 3 месяца назад

Way more helpful than my college professor. Thanks

@christopherreynolds826 4 года назад

Thank you sooo much for your explanations. You're the first channel who explains WHY some things are better then others and how they relate in space. Please never stop doing this!

@follyroger 4 года назад

This is the way tutorials should be taught. Perfect!! Loved the accent too. Might try to figure out how to get your voice on my GPS

@393strokedcoupe 6 лет назад

You Sir, are a natural teacher. This is a talent that doesn't come easily to too many people in the business of education! Thank you! 👏

@mvdmusicvideostorefreshthe3224 3 года назад

Teachers can know their subject but teaching is a skill that not many have, but this guy does.

@mvdmusicvideostorefreshthe3224 3 года назад

Constraints have been a black art, but you have done a great job especially explaining 'Design Intent' another phrase that I never fully understood, but you explained it via AutoCAD. Top class teacher, thank you.

@riri8264 4 года назад

Not even an Inventor user but I like your teaching style Sir. Thank you for sharing these videos. Salutations from France.

@DevineIshaq107 5 лет назад

Learner oriented lecture , with dynamic flow of knowledge, it took 3 hours in all to learn constraints while doing practise and now things will be easier while making a 2d and 3d God bless. thanks

@alexisfernandez8998 6 лет назад

Amazing delivery. So much better than Autodesk's tutorials.. great job mate!

@robbbarrett6430 7 лет назад

Autodesk I hope your watching. Tutorials .this is how you do it ... short and sweat. bite size .

@JayGee6996 7 месяцев назад

This should be CAD lesson No1. Excellent tutorial 👌

@rootjacek 6 лет назад

Kolego jesteś geniuszem prostoty i finezji w jednym. Dzięki za ten filmik - powinien się nazywać "Inventor poradnik dla opornych". Genialne !!!!!!. Lepszego kursu jeszcze nie widziałem - pozdrawiam. Buddy, you're a genius of simplicity and finesse in one. Thanks for this video - should be called for a "Inventor guide for resistant to knowledge". Brilliant !!!!!!. I have not seen a better course yet - best regards

@shannahbrown 5 лет назад

Love they way you explain things! Makes it easy to understand and remember.

@griff4455 5 лет назад

Haha 1 minute in and I already love you. The 'secret club' thing was so relatable to me xD

@hmaan675 6 лет назад

Best videos with a passionate teacher.You beat all in clarity. You focus on features and techniques which actually come handy..Thanks

@adilmalik7066 7 лет назад

excellent video! As a beginner from a non CADee background i found that merely howering over the unlabelled buttons is super helpfull as you get pop outs explaining the function

@RoRockerB 3 года назад

Sweet! Thanks!! Straight to the point with direct applications with no added fluff! Thank you thank you thank you sir!

@TonyRios 7 лет назад

Thanks, I wish I would have watched this sooner. But it's never too late.

@inventorautomation1395 Год назад

Way better than my Inventor videos 😅

@user-lq7bc4tx4p Год назад

Lolll you are funny but in the same time you are teaching us in a very and unforgettable way. Thank you :)

@JJ79ty 4 года назад

You are the best. Next week I'm starting course of Inventor. And thanks to you I won't feel like amatour there :) Once again thank you!

@octarapribadi 4 года назад

I'm struggle to learn inventor and this video help alot, thank you.

@aleksanderandersson Месяц назад

Thank you very much for making this, its brilliant!

@diegoeduardoorregohidalgo8209 7 лет назад

Thank you !!! I was looking for a tutorial like this like forever, you have made my day sir

@RCWalletVacuum Год назад

Thanks for all your excellent videos, you've helped to get me going in inventor, and that is saying something!

@BoldUniverse 7 лет назад

I appreciate your vids and find I'm getting a lot out of them. Cheers :-)

@carlosalvarez8076 7 лет назад

Good video Neil, a good way to use the constrains quickly is pressing Ctrl button and then right click in sketch environment, that show you all the constrains with their names. I just discover by accident and now I can't design whiteout using it (the quick access, not the constrains).

@travezripley 7 лет назад

Thank you for this, shared the link with my coworkers learning to model.

@naeemurrahman8767 4 года назад

Should have watched it much earlier but at least I've watched it today. Thanks a lot 👍

@anisbizertino1 2 года назад

Thank you very much, you earn a new subscriber🤗

@user-qd4kt7ze3o 2 года назад

Many thanks for the concise explanations, quick and with examples, great video!

@brennerfab770 7 лет назад

Another piece of the puzzle. Great explanation!! Thanks!!!

@ronaldoaymanoo 2 года назад

Excellent video !!

@Uthael_Kileanea 6 лет назад

15:08 - about the center dot of the sketch... I like to think about it as the reference point, not a center point. For this example, let's say that this is a jigsaw puzzle piece. I'd probably constrain that point to the center of one of the circles. So, when I insert it into a hole in an assembly, it fits even before any constraints are applied. This allows for a preliminary glance at how it would fit and sometimes even saves me a move command or two.

@handsoapshitmada7590 6 лет назад

We saw this in school it was very interesting

@TheCuriousOrbs 5 лет назад

My god, is that really your name?

@RodGriTV 7 лет назад

Hey TFI, I just started your tutorials and in need to say that you are great men. I will go ahead to the first one how to learn inventor in one hour. Thank you for using your time to teach us. 👍🏼

@kersamjernezian 3 года назад

Very njce explanation. I NEEDED this lesson.. And you are funny 😄

@jazzGT 7 лет назад

Excellent video. Could you possibly make a video about constraining 2D sketches with splines? And how to properly draw and manipulate them? Thanks.

@danieltaon7333 6 лет назад

you are freakin good teacher, bless you

@Zamir321 7 лет назад

i learn more from your videos than in school Thanks.. Could you make more tutorials in fusion 360?

@luismdoz 7 лет назад

Could you do a video on detailing drawings. Like coloring layers and having more options once they are exported in .dwg I just convinced another subscriber, an engineering student in the USA from Newcastle. I'm sure he would try to get in touch. Cheers!

@woodbay8209 4 года назад

Thank you for this. I have a much understanding of it now. Cheers!

@bccphotodesign4398 3 года назад

I can't thank you enough for this good lesson.

@quyethuynh4967 5 лет назад

I love this video! Holy this video would of help a lot if I saw this video before my project was assigned. XD

@f.k.6151 2 года назад

Fantastic tutorial, Sir, thank you.

@yongchunseow9455 2 года назад

Thank you so much for this awesome video!! 👍🏻👍🏻

@kamilwawer9949 7 лет назад

Yes, that's right! Could you develop what's the smooth constrain and what are the rules of using it?

@Neil3D 7 лет назад

Yep i'll do a dedicated vid on G2. If someone is an absolute beginner, no way are they going to remember or understand what was explained about G2 so its one for its own vid.

@lookyloo777 6 лет назад

awesome,your really making this enjoyable for us beginners ,Thank you !

@HDLowrider03 6 лет назад

Thanks for the videos bud, they are very helpful.

@brainnurture1828 Год назад

Thank you

@michaelkleanthous8141 5 лет назад

Very nice and precise edjucational video's well done. keep up the good work and thank you very much.

@nanoprehistoric 6 лет назад

Thank you very much, you earn a new subscriber ;)

@SenakaUdapitiya1 7 лет назад

Thanks for this video ,really helpful video ,

@pascutioan 4 года назад

Great video, love the accent! Thanks!

@VertikalDesign 6 лет назад

what a great tutorial. thanks!

@tatendakuodza 6 лет назад

"And not matter what happens in the life of that line, it will always be horizontal" hahahaha Great tutorial

@Zuurik_x 7 лет назад

Why did you not show smooth (G2), or is this last constraint to advanced :D, but great video,, keep it up.

@Neil3D 7 лет назад

The diplomatic answer is that indeed it's a little too much for a beginners intro to be covering G2, the actual real answer is that I totally forgot about it when I was looking down the list of constraints and missed it! I remembered about it whilst rendering the vid, and decided to roll with it. I'll probs cover it in a dedicated vid.

@CoderTronics 7 лет назад

Thanks some useful stuff here

@exploringwithejaz8254 3 года назад

great sir

@duynguyen6802 5 лет назад

If i saw this sooner , it woulb be so great ... Haizz :((

@ivanb8391 3 года назад

Very very helpful!!

@sasadivjak4749 7 лет назад

You are KING!!! TX

@boblombardi9397 6 лет назад

excellent video as always............Thanks much

@salahal-khafajy6443 6 лет назад

This is great, Thanks a lot ! :)

@edcente5838 3 года назад

i like your videos about beginner's guide it can help a lot but I suggest please talk thinly and briefly, just limit your words it is very easy and effective for understanding in such a complex structural designs and 3d CAD software. by the way I like your videos.

@kmutech718 7 лет назад

very use full tutorial thanks

@tonyziadeh8931 4 года назад

thank you

@kirishima3034 5 лет назад

I like your videos keep going

@jeff503pdx 2 года назад

How do you move the lines around so quickly? I only know the slow way buy clicking the MOVE command then BASE POINT. thx.

@davidgruty 2 года назад

Can you see the constraints in the tree (like in Catia)?

@hunhs 7 лет назад

Hello, have you done videos about CAD mice/trackballs, equipment or something that makes work/workflow faster?

@pomranirad 6 лет назад

Oh oh oh , you are great! tnx

@al-mahanadal-farsi1699 5 лет назад

Thanks a lot.

@arunraj_r 4 года назад

While using move tool in sketch, how to select line/rectangle midpoint as base point?

@brightgardenentrepreneuria910 7 лет назад

Great share, thanks.

@StraitD2 5 лет назад

Thankyou!

@CWSOF 4 года назад

Is there a way to join lines, curves and etc?

@qwidium 7 лет назад

Hi there, i just started to watch your inventor. From what i can see you cant be to inventive in inventor. You need to know precise what you want to do, to apply constraints at every step. In one word, inventor isnt the place where your ideas are born and get polished to an acceptable level. I am wrong? If so, can you please show me an approaching method? Dont know, maybe using a 3d sketch or something like this, construction lines, planes. A way to draw and start detailing without losing the entire model (part or assembly) from sight. Can you modify a solid on place? I mean without switching to his 2d sketch view. Many thanks:)

@epicbanana4317 6 лет назад

For me when I draw a horizontal or vertical line it is not automatically being constraint, aka i can still move a horizontal line vertical etc. Is there any way i can change this?