3 Easy and Effective ways to mask Aircraft Canopies! | Quick Tutorial

Подписаться 30 тыс.

Просмотров 66 тыс.

50% 1

Hey guys, Modelling Weekly here! This week I'll be bringing you 3 super effective ways to mask up your aircraft canopies! They're also fast and easy, so I hope you find the video helpful!
Thanks for watching the video! If there is anything you want to know, or anything you want me to know feel free to ask!
--------------------------------------------------------------------------------------------------------------------------------------
Music written and produced by PSBMusicStudio. Check out his RU-vid page here:
/ @pablosharples
Check out my Instagram for updates on builds:
www.instagram....
Discord server:
/ discord
--------------------------------------------------------------------------------------------------------------------------------------
To contact me, you can use the comment section or use my email (contact@modellingweekly.co.uk). You may also contact me through social media, although I may not respond quickly.
Be respectful in the comment section. I do not wish foul language to be used as it makes it a bad place to be. Aggressive language towards my video in a comment will result in the comment being removed! Constructive criticism, however, is greatly welcomed!!
Again, thanks for watching and see you next time!

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 144

@ModellingWeekly 3 года назад

I hope you found the video helpful guys!

@freda8586 3 года назад

Thanks for the tips

@ModellingWeekly 3 года назад

@@freda8586 No problem!

@MrKredski 3 года назад

I did, thanks. :)

@killmonger1012 3 месяца назад

Absolutely!

@davidwoolsey2300 2 года назад

78 years old-gonna try my hand at this hobby. Thanks for your great instructions. Simple and to the point.

@namvet6971 5 месяцев назад

I'm 74 and great hobby for concentration and steadiness. Keeps mind active too. Look for a local modeling club....

@coxdenton 2 дня назад

@@namvet6971I’m 77 and thought I cracked it until I tried 1/35 figures

@CortxVortx Месяц назад

Great tips. I always pack modeling clay inside the canopy to lessen the chance of breaking it. Stick a round toothpick in the clay for a handle.

@ModellingWeekly Месяц назад

@@CortxVortx good tips there!

@garydaniels5495 17 дней назад

Great idea. Never thought of it.

@artistpoet5253 Год назад

Not kidding. I've been building kits nearly 40 years and never once thought of painting the interior color first on the canopy before applying the exterior color. I've always just spat and cursed my way through a tedious hand brushing on the interior of the piece.

@ModellingWeekly Год назад

I have to admit, it took me a while to figure it out as well 😂

@TheNotabadcat 8 дней назад

Triangle method is now one of mine. Merci de France.

@rogerpattube 2 года назад

The triangle! Simple yet effective. Almost too easy!

@ModellingWeekly 2 года назад

Very true haha!

@davemardon6756 Год назад

Good video. Another tip: Mix up a mixture of some Dish Soap and Water and apply it to the surface. This allows you to move the tape around (slides across the surface). Once in position, blot it dry and the Tape will stick as normal. Its the same idea when using Pre cut masks.

@ModellingWeekly Год назад

That is a brilliant tip! Thanks for adding!

@adandap Год назад

Good stuff. The only tweak I'd make to your approach is to cut the tape on glass or a glossy ceramic tile (that's what I use) rather than a cutting mat. The hard surface gives a cleaner cut.

@jamesmcansh3441 3 года назад

I've always struggled with canopy painting these straight forward techniques are amazing. Thanks again ✌🇨🇦✌

@ModellingWeekly 3 года назад

It's for sure a painful process! glad I could help man!

@briansmith8079 2 месяца назад

After all these years of modeling i just learned two masking techniques I'm going to start doing - graphite/cut and the triangle/masking fluid. For years I've been so put off by canopy masking. Now I feel more confident. Thank you for posting. Very beneficial.

@ModellingWeekly 2 месяца назад

@@briansmith8079 so glad you found it handy! Good luck and thank you for watching ☺️

@alldilatapir Год назад

This is my lucky day! Canopy masking and painting is always frustating, but i found this tutorial and this is the best! The presentation is easy to understand for non native English speakers like me. Thank you thank you thank you for all of your videos.

@ModellingWeekly Год назад

I'm so glad you could find it helpful :)) it's the best feeling ever being able to help someone out and I'm so glad I could ☺️ take care man

@PirateMTH_ToddH Год назад

I think this is one of if not the best canopy mask videos I've seen. Great advice, clearly presented. Awesome work. I will definitely be trying these techniques on my next build. Thanks for sharing.

@ModellingWeekly Год назад

No problem at all! It's my pleasure. So glad you found it helpful!

@PVZ_Kr4ngle Год назад

Bro THANK YOU! I used to just paint them on with nothing but because of this video my canopies look excellent! You have a new subscriber!

@ModellingWeekly Год назад

So glad I could help! Thank you 😄

@beauxtx1959 3 года назад

EXCELLENT! Love the triangles!

@ModellingWeekly 3 года назад

It is a great method isn't it! Originally learnt it from a shop owner at a hobby shop. Always comes in handy!

@garydaniels5495 17 дней назад

In addition to washing the plastic parts, you should also wash your hands first so that the oils in your skin or other assorted dirt and grime don't get on the clear parts.

@vincentnoriega3353 5 месяцев назад

Great tips, nice explanation

@imtoys23 Месяц назад

Faaaantastic !!! Thank's for shering.

@NickAndrewsFaulkner Год назад

Thank you! A few recent issues due to trial & error, your guide has put me back on the right direction.

@derniko1992 10 месяцев назад

thank you very much. after scratching my apache canopy trying to cut the tape on it, I'll try the graphite method.

@kitbuilder3027 8 месяцев назад

I always learn something from you. Thank you. Larry Landis

@ModellingWeekly 8 месяцев назад

No worries :)

@robbo1068 3 года назад

Thanks for the tips/techniques and presenting them in an informative and effective manner. I didn't know about the triangles method so I've learned something new yet again. Your videos are always insightful and you provide heaps of information through your commentary.....great work!

@ModellingWeekly 3 года назад

Thank you so much man, and in glad you could take something away from the video! 😊

@supercededman 2 года назад

The triangles method seems like the go! I'm more likely to choose one of the methods where I'm not cutting the tape on the canopy itself.

@JagdeepSingh-sy2mh Год назад

Superb techniques. Thanks very much.

@ModellingWeekly Год назад

No problem :)

@BobMuir100 Год назад

Brilliant! Thank you Bob England

@freda8586 3 года назад

A good friend of mine migrated to the U.K. and I encouraged him to start on this hobby. I am an armor modeller who used to do aircraft. He got an airfix starter kit already.

@ModellingWeekly 3 года назад

That's very good to hear!

@freda8586 3 года назад

@@ModellingWeekly I told him: welcome to the hobby. He got the Spitfire Mk1a.

@ModellingWeekly 3 года назад

@@freda8586 👌🏻 a good choice!

@ljscalemodels526 Год назад

Hello - what a very helpful video, love the triangle method, thanks for sharing, cheers Liam

@Blackout5871 Год назад

Very helpful. I'm terrible with doing canopies and windows.

@joseluiscastanorestrepo 2 года назад

Great techniques, the graphite technique is very good for me. Thanks.

@robertmunoz7543 10 месяцев назад

Great ideas!🤘 Jman

@bigalexg 2 года назад

Great ideas. I love the triangle method. Well presented. Liked and subscribed. Looking forward to more videos from you sir

@maydaypc 3 года назад

Thank you for your time and effort to share the knowledge with us. Thin strips method is my way to go. After laying down the thin strips I fill the area to be protected with white wood glue. No issues so far (Only once after paint job is finished I had to do some maniplation on the color so I remasked the already painted canopy with just white wood glue. Model was Bf-109 and when I removed masking all paint on the canopy came with it. Lesson's learned.)

@ModellingWeekly 3 года назад

No problem! You're right, everything in modelling is a learning curve!

@mr.fazeli 2 года назад

Wait u can use the normal wood glues which are white as a liquid mask? Man u saved me, Vallejo liquid masks are too pricy in my country,they're like 10 percent of my salary per a 60 ml bottle.

@maydaypc 2 года назад

@@mr.fazeli You can also use it as a paint mask too. I mainly make aircarft models, but I wanted to try tank model. I find it very difficult to mask for painting. So I thin the white wood glue with water and painted the areas that I don't want to be painted with this thinned solution. After painting session., wait 30 minutes and dip the model into warm water and gently brush away the white glue. Result is perfect for me.

@ThorstenWieking Год назад

A methode I sometimes use, is to get a graphic of commecially available canopy masks (some manufactures nowadays distort their graphics on their website catalogue, but mostly do this to newer products.). Once I have the graphic of the mask, I open them in either a graphics programm or sometimes even MS Word is suffice. I take on measurement of the canopy (e.g. lower corner of the front window), size the graphic to the same size, make a test print to look if the size is correct. As soon as I have a printout of the masking graphic in the right size, I tape masking tape over the printout and cut the masks accordingly. With a recently purchased Cricut Joy cutting plotter, I could forego the MS Word und printer step, just loading the graphic in the plotter program, resize, cut and apply.

@ModellingWeekly Год назад

This sounds fantastic, I'll have to look into this!

@JamesJurgensmeyer-xe3gw Год назад

I found this video very helpful!

@ModellingWeekly Год назад

I'm glad!

@anyblunder6782 3 года назад

That was extremely helpful, I learned two new techniques I’d never heard of.

@ModellingWeekly 3 года назад

Glad you found it helpful :)

@anyblunder6782 3 года назад

@@ModellingWeekly very, masking canopies and clear parts are a nightmare. That’s why I build tanks, there are no windows in a tank.

@mrratskins 8 месяцев назад

Excellent video. Now if I can just figure out how to get slight residue from Tamiya tape off clear coated finish.

@ModellingWeekly 8 месяцев назад

If you mean getting any residue off the clear canopy parts, you can carefully use a tiny bit of isopropyl alcohol along with a cotton bud to work it off :)

@mrratskins 8 месяцев назад

I had already dipped the canopy in pledge floor polish, which I believe is an acrylic. Do you think that would be safe from the isopropyl?

@ModellingWeekly 8 месяцев назад

@@mrratskins I'm not sure about that, I've never used pledge before myself. I'd give it a test beforehand on a testbed :)

@mrratskins 8 месяцев назад

I'm running a test right now. I coated some clear styrene with pledge. I'll go check it. Back again. Looks like the isopropyl stripped off the pledge. However, I was very aggressive. I may try it with a small canopy panel and be more gentle. If it removes too much acrylic I can paint it back in with a small brush. Pledge does a really great job of filling in minor scratches and adding some real clarity to a canopy. Go check out some videos about dipping clear parts.

@anthonymitchell3225 3 года назад

Painting canopies is the most frustrating part of building a model aircraft for me, will be trying the triangle method though as this looks the best option, thanks for the tips a fantastic help

@ModellingWeekly 3 года назад

Very glad I could help!

@Camdouin Год назад

Very helpful, good stuff.

@jorge_attikos 2 года назад

Really really really very HELPFULL!!!!!!!👌👌👌

@americanpatriot2422 2 года назад

Outstanding video and presentation

@ModellingWeekly 2 года назад

Thanks so much ☺️

@majorkursk780 3 года назад

Well done...great modeling tips!

@ModellingWeekly 3 года назад

😄

@MrPDoff 3 года назад

For more years than I can rember I have used a pencil to push down masking tape instead of cocktail sticks as it helps with defining where I'm going to be cutting. But funny enough I never thought about peeling it off and cutting along the lines. Triangle trick looks worth a go

@ModellingWeekly 3 года назад

Glad you could take something from the vid! 😄

@jb314stl Год назад

Very helpful.

@antmaster79 10 дней назад

Thank you for the video. Do you treat the canopy with product like pledge? I know it has been discontinued so wondering if anyone uses any alternatives

@ModellingWeekly 10 дней назад

@@antmaster79no problem! I personally don't, as I find that most modern kits have pretty nice clear parts with good clarity and shine, however some vintage kits could benefit from treatment (however unfortunately I'm not aware of a product similar to pledge)

@c123bthunderpig Год назад

Triangle a bit more work, but best technique, after all, it's what modeling is all about :-)

@robbeard6929 2 года назад

Haha, try masking a 1:144 Lancaster cockpit and gun turrets, I ended up in a straight jacket. Another little tip though especially for brush painter but also sprayer, paint or spray clear gloss varnish on the surface after masking to stop colour bleed.

@ModellingWeekly 2 года назад

Haha!! Can imagine how much of a nightmare that would be! Thanks for the tip!

@supercededman 2 года назад

Great video! I'm stressing over masking small canopies (ala Spitfire and Bf109E) in 1/72.

@ModellingWeekly 2 года назад

Thanks! Yeah, it can be a bit nerve wracking but with a bit of practice you'll be able to knock em out like nothing

@mickb2075 2 года назад

Great video thanks

@imsobaseddd 3 года назад

Thanks just bought a new model

@tonyromano6220 2 года назад

Very helpful!

@ModellingWeekly 2 года назад

☺️

@jameswestgarth8096 Год назад

Can you show us heavily framed canopy, like a huricane or JU-88

@ModellingWeekly Год назад

It's the same concept, just more cuts :)

@patricktim140 2 года назад

TANKS

@Dwarvious 5 месяцев назад

What if (and this is a weird situation I find myself in,) there are no canopy details to follow with tape because for some reason they've been moulded on the inside of the canopy..?

@ModellingWeekly 5 месяцев назад

Can you see the moulded lines through the plastic from the outside? If so, I'd probably just get some really thin masking tape and work your way around the outside of the canopy, using the inside lines as a guide to get it as accurate as possible

@Dwarvious 5 месяцев назад

@@ModellingWeekly Yeah, I believed I would have to try something like this. Wish me luck!

@ekspatriat Месяц назад

Best way is to buy masks.....sorted.

@ModellingWeekly Месяц назад

@@ekspatriat unless they aren't available for that particular kit, or if you want to save a bit of cash :) unless it's a really complicated canopy, sometimes it's worth doing yourself!

@marksixofone4104 3 года назад

Fantastic tutorial. I have had problems with paint lifting from the canopy rails due i believe as you say from leaving the masking tape on for far too long. Do you think lacquer paints would be better in this respect and cut down on lifting. Thanks.

@ModellingWeekly 3 года назад

I think lacquer paints will do a lot better than acrylics, purely as acrylics form a proper sheath of plastic when they dry. Can't 100% confirm though, as I only use tamiya hybrids!

@OdysseyAviation 3 месяца назад

Can you paint the canopy without having it on the aircraft ?

@ModellingWeekly 3 месяца назад

If that makes it easier in that situation, yeah

@OdysseyAviation 3 месяца назад

And also how you then paint exterior with silver?

@ModellingWeekly 3 месяца назад

@@OdysseyAviation for this aircraft I used an airbrushed lacquer paint, however if you don't have an airbrush I'd recommend using a tamiya x-11 silver rattle can :)

@Idengard 2 года назад

After painting the interior color, do you make a new mask for the exterior color?

@ModellingWeekly 2 года назад

Nah, it works great just spraying the main colour over the top of the interior colour with the same masks!

@yurycz8933 2 года назад

👍

@statoilbensin2190 3 года назад

What about using masking fluid?

@ModellingWeekly 3 года назад

You can use it to fill in areas inside masking tape, though its very common for masking fluid to rip paint off when used to mask the edge of a canopy strut. A good example of this is Plasmo's TU-154, he used masking fluid for the windows and it was a disaster lol

@CageRattler_ Год назад

i have a canopy with like 20 windows it's a tamiya a6m2 what can i do about it

@ModellingWeekly Год назад

A zero canopy would probably pair best with the triangle technique, just cut a bunch of tiny triangles

@robertdigby4504 Месяц назад

How did it work out for you? I’m doing that kit now

@seantaplin581 3 года назад

Which is more detailed eduard or tamiya? In terms of spitfire mk1/mk1a.

@ModellingWeekly 3 года назад

Well, the Eduard kit I believe has a full set of rivets, though I'm not sure so I'd check an unboxing review. If it doesn't have all the rivets, then I'd go for the tamiya kit. The detail is still very good, and the fit is excellent

@seantaplin581 3 года назад

Should I get 1/72 or 1/48 tamiya spitfire mk1a?

@Kairasp1 Год назад

Sir hi, you did not show how front canopy is masked, WHY.

@ModellingWeekly Год назад

It's the same process as with the curves, just easier - so I figured it would be fairly pointless

@adampender2482 3 года назад

Why is it that all canopy masking or painting tutorials are with bubble tops? Do a BF109 or a B17 canopy on one of these tutorials.

@ModellingWeekly 3 года назад

It's the only one I had available to use lol. Got a lot of tank kits in the stash 😂

@BearGrisham Год назад

What is your preferred method out of these techniques?

@ModellingWeekly Год назад

The one I use all the time is just the simple cut on surface - for me, it's the fastest and achieves the most accurate results :) you'll definitely want a brand new blade though to make sure those cuts are nice

@cmm30 Месяц назад

so...use masking tape.

@ModellingWeekly Месяц назад

@@cmm30 *how to use masking tape most effectively in this particular scenario :)

@V081WLBlue Месяц назад

Waste of time! Just paint the thing with a brush in several thin layers, any overpaint can be removed by gently rubbing with a soft pointed wooden toothpick. Honestly these are really old ways of doing things, just because this is how the real thing is done doesn't mean you should do it on a wee small tiny model, move on people! lol

@ModellingWeekly Месяц назад

If this works for you, go for it! However the toothpick scratching method only really works with enamels and some acrylics due to composition, whereas it's hopeless when using lacquers, alcohol based acrylics, and other modern paints. I also find that even when it can be pulled off properly, it doesn't give as sharp a result as a good masking job. So, each to their own, but many people do appreciate the advantages of a good roll of tape!

@Joesoe06 3 года назад

Ah thank you for this video, im getting an airbrush and my biggest fear is masking the canopies.

@ModellingWeekly 3 года назад

No problem! Glad you will find it helpful 😊

@lewistaylor1965 Год назад

Anyone any idea?...I have the Beaufighter revel 1/32...I dipped the canopys in Klear and a few weeks later the canopys went cloudy/foggy...It hadn't happened before to any of my other kits...but I cant seem to get rid of it which spoils the model actually...Ive tried dipping the canopys in windolene as someone suggested to get rid of the Klear...Not sure what to do..any help would be appreciated...Thanks