3 Japanese Saw Tricks You Should Know

Подписаться 550 тыс.

Просмотров 267 тыс.

50% 1

Suizan Saws Presale lddy.no/stih
This week’s woodworking skill builder is Japanese Pull Saw Tricks you should know. I go over the built in depth guide, the mirror trick and the front tooth trick. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
Read the blog on this video: kmtools.com/blogs/news/japane...
----
Suizan Saws Presale
lddy.no/stih
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM

Хобби

Опубликовано:

14 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@katzmosestools 4 года назад

*Suizan Saws Presale* bit.ly/SuizanSaws cheaper than Amazon by 10-20%

@nikguthrie1514 4 года назад

Jonathan Katz-Moses is there a difference between the ryoba and a dive taillight saw?

@katzmosestools 4 года назад

@@nikguthrie1514 yes. Check the product descriptions or watch my japanese saw video from a year ish ago.

@nikguthrie1514 4 года назад

@@katzmosestoolsThank you very much, I am just getting started in finner woodworking and your videos are a great help. I am getting you dovetail guide as a Christmas present and I can't wait!!

@katzmosestools 4 года назад

@@nikguthrie1514 I can't wait to see what you create bud!

@Jimbo878 21 день назад

I watched this video, put my eyeglasses on, had another look at my Japanese saws and was dumbstruck 😮, I never noticed the back and front end of the saw plate, absolutely genius, you Sir, are a Master.

@vmitchinson 4 года назад

I saw tip 1 a long time ago and always wondered why nobody ever explained it when they were showing how to use these saws. You have provided the best and clearest directions I have ever seen. Thank you. You are the very best.

@JackMoskowitz 4 года назад

Cutting through the plastic is a great way to actually see what you are talking about. Another great set of tips.

@katzmosestools 4 года назад

Thanks bud!

@TetraCNC 4 года назад

finally someone has said why you look at the reflection. Thanks.

@samzhangsd91 4 года назад

Just started learning woodworking. And these saws are great!

@brianfreeman8290 2 года назад

As I've just bought my first Ryoba, I'm glad I found this !

@ArtisanMade 4 года назад

I'm always learning something new when I watch your videos! Love Your Channel!!!

@DonsWoodies Год назад

Good tips

@uhN0id Год назад

I'm getting ready to use my Japanese pull saw for the first time (on a real project) and these tips saved me a lot of trial and error thank you! Also, if I close my eyes and listen to you I'd swear Guy Fieri was teaching me woodworking recipes.

@aarondsalberg 4 года назад

Just bought one on your advise. Works beautifully. Thank you.

@jettkeyser9909 4 года назад

Really appreciate the skill building segments...The ease in checking out of your store was helpful...I can’t wait to use the two 9.5 inch folding saws...I have another dovetail jig but would enjoy trying yours one day...Thank you

@robertbankhead8661 4 года назад

Jonathan, you continue to amaze me. Excellent video!

@craftwerk6762 4 года назад

Thank u for this awesome tricks with the japsaw. Greets from Germany, Tom

@jayejaycurry5485 3 месяца назад

Fantastic advice.

@blazeharding574 4 года назад

"crevasse, I am so fancy" hahahaha. Thanks for having a personality.

@ChattanoogaDan 4 года назад

Thanks Jimmy, great tips.

@xrPingJockey 4 года назад

Great job as always Jonathan. Just ordered the Ryoba and Dozuki and looking forward to using them.

@anthonyzottarelli3284 4 года назад

I just bought 3 saws and a jig from Jonathan. Great communication, super fast shipping, combined item discounts. Beat amazon pricing. The shopping experience is as good as his videos.

@katzmosestools 4 года назад

Thanks so much bud! I can't wait to see you create!

@benjaminrees6665 Год назад

Thanks for the skill building vids! Been quite helpful

@benjaminrees6665 Год назад

Ive used many sizes and purpose sharksaws alot and been mostly happy I'll try the suizans!

@peterdowning2525 4 года назад

Been contemplating buying the jig for a while, but this settled it. Got a saw, both jigs, and the stop block. Great deal! Hoping to teach my 10 year old daughter dovetails. She’s wanted to for a while and I think the jigs will lessen the frustration factor. Thanks!

@ShaunGuthrie-CaskWoodworking 4 года назад

Dude these are awesome tips! Never even knew that. Thanks!

@philipbyrnes7501 4 года назад

Excellent tips, thanks mate, very helpful, ta 😎👍🏻

@penguinpie5056 4 года назад

thanks. learned something new

@Youzack1 3 года назад

You managed to make me feel like an idiot in 2:17... lol that depth stop tip is gold. Thanks man.

@danielgeng2306 4 года назад

Great tips ! Had no idea about the front and back teeth

@garagemonkeysan 4 года назад

So many great tips in this video. Nicely done! Mahalo for sharing! : )

@katzmosestools 4 года назад

Cheers bud and thank you

@EngineerMikeF 4 года назад

Great saws & great pricing even after shopping. I bought the folding Ryoba right after you recommended it previously, I've been waiting for purchase of the other two I wanted till you had them up on your store. Now you need to stock replacement blades also! Thanks.

@HandCraftedbyJasonCooper 4 года назад

Great tips. Much appreciated... Now to hand cut some dovetails.

@bobcooke1820 4 года назад

Hi Jonathan just order 3 of the saws. I already have a Suizan saw and it's great they work really well with your jigs and alignment board. I thinking the folding saws will help with storage. Thanks Bob

@SH-fi8sn 4 года назад

You ARE so fancy! Thanks for another great vid!

@wb_finewoodworking 4 года назад

Great tips.

@christophschumacher640 4 года назад

Very helpful👍

@redcard3083 4 года назад

Awesome!

@ninoding 3 года назад

1:40 ladies and gentlemen, this is what woodworkers do for some bonus cash.

@The_Njitram 4 года назад

I literally tried to blow away the dust at 2:45 that means its really starting to get late😂

@GregsGarage 4 года назад

Great tips Jonathan! I didn't know about the first tooth as a guide. That will be handy!

@katzmosestools 4 года назад

Yeah that's my absolute favorite

@TheRPhelps24 4 года назад

I'm super guilty of needing that depth stop trick! I'm looking forward to trying it!

@drawlele 4 года назад

This video is going to be super handy, I just switched to Japanese style saw and was wondering if there were any tricks to using them. Thanks

@katzmosestools 4 года назад

My pleasure bud!

@explorerextraordinaire5472 4 года назад

WWWWOOOOOWWWWW 2:00 THAT'S BRILLIANT!!!!

@johnbergeron3486 4 года назад

Thank you

@ExamProChannel 26 дней назад

The third tip was the cut supposed to be slanted? I guess they are just demoing and not trying to produce a straight line?

@explorerextraordinaire5472 4 года назад

Thanks bud

@Ham68229 4 года назад

What I learned about Japanese saws is, they, (Japanese carpenters), like to cut at angles. Just like you did with that see through block. The reason behind that is, as you cut on one side, they "flip" the piece around or move to the other side pending on large the piece is. They'll cut on opposite side going back and forth between the 2 sides, the "cut" acts as a guide to the saw. It's cutting a "triangle" until the end of cut and just as you shown us about that "gauge" or tooth, it guides to finish the cut. I'd love to get a set of those Suizan saws just, the timing of your sale doesn't coincide with mine at the moment. Hopefully, later on or if there's another discount sale you might have. Never thought about the back/end teeth in that way before, something new for me. I just always used my marking knife/utility knife after using a chisel to make that knife wall. Thank you. Cheers :)

@walterrider9600 4 года назад

thank you fancy Katz .

@JohnSmith-vx1fr 4 года назад

What would you suggest I do in this case. I'm cutting aorund a door frame and I made a great little jig to the height I need but I keep getting lift up on the handle side which makes for a less than square cut

@zachcoelho6949 4 года назад

Since I'm getting into building guitars I've been needing to get one of those saws you use for dovetails cause I've seen a lot of guys using them to cut the fret slots. I was going to order it off Amazon but since you're carrying them I might as well get a folding one from you.

@katzmosestools 4 года назад

And they're cheaper than Amazon by 10% minimum. Up to 20% more if you buy other KM products.

@johnbesharian9965 4 года назад

Might not only be cheaper, but a lot less expensive than what we used at Stars Guitars in San Francisco. A full size Bridgeport Milling Machine w/digital readout. (I was the Guitar Doctor and used to make "House Calls" to concerts and recording studios & fix things on the spot as well as in-house repairs.)

@Nohkral 4 года назад

Would a ryoba be good for camping? I never see it used for trees and branches

@JustTony72 4 года назад

Hi Jonathan, will you do a lot with all 5 saws?

@kathrynroberts2246 2 года назад

I would love to see a rob cosman style marking knife from Suizan. I use your small Dozuki for dovetailing, and I love the depth stop feature, sometimes. Other times I want to use the tip of my saw to co into the kerfs of my tails cuts to mark out my pins ala rob cosman. Could suizan provide a marking knife blade made in the same kerf size as their Dozuki saws?

@Kkuts37 4 года назад

#Bundle #Great deals!! Thank you, Sir!! Great Christmas gifts... :)

@katzmosestools 4 года назад

Yeah I really want to give some steep discounts.

@wwscott7595 4 года назад

Hullo young man. I watched your first video on tricks with the Japanese saw's and I use them frequently, they are also very well price for the quality you show. the problem is they are too expensive for us to buy over hear. On the other hand if I bought one of your drawing's you could consider sending me one that would allow me to return a comment.Take care BIG GUY.

@bobridge5271 3 года назад

Thanks for the tips. I have lived in Japan for 30 years and use saws regularly, but did not know the first tip. For the second tip, I think the situation is different in Japan, because none of the saws are shiny, they all come with a matt finish. Perhaps they make shiny saws for export because perhaps overseas customers like them that way?

@johnkrider4349 4 года назад

If you had to buy just one what would you recommend?

@heyimamaker 4 года назад

Awesome! Have you done a video on your process for making a product? Not how you came up with a product, but the process of prototyping, sourcing materials, and where to have them made?

@katzmosestools 4 года назад

I'm actually going to be giving 2x 1.5 hr talk about exactly that in Atlanta at Workbench Con. You should check it out

@heyimamaker 4 года назад

@@katzmosestools AWesome, Will it be streamed or available online after?

@katzmosestools 4 года назад

That would be up to them I think. I may record it and ask permission though.

@heyimamaker 4 года назад

@@katzmosestools Look forward to it!

@TheSMEAC 3 года назад

A good way to envision that front tooth is as if it were the “runner” in a plough, grooving, or combination plane.... thanks JKM 👍

@TommyGWorkshop 4 года назад

Awe I got those exact same saws like 2 months ago lmao

@jeffcowden7079 4 года назад

minutiae.... really flexing that vocabulary game aren’t we!!!! Lol

@williamlivingstone4326 4 года назад

I need a good saw that I will be using to make musical instruments. Sometimes the wood I cut into is very hard... With these saws do you sharpen or just replace the blades?

@katzmosestools 4 года назад

You replace the blades

@williamlivingstone4326 4 года назад

@@katzmosestools how often?

@katzmosestools 4 года назад

@@williamlivingstone4326 this isn't meant to sound snarky but when its dull

@SethsProject 4 года назад

As someone that has studied Japanese tools, and uses mostly Japanese tools. One problem I see most Westerners do when using a Japanese saw is that they hold it like a western saw. There is a reason the handle is so long. You want to hold the saw as far back on the handle as you can. This makes for much more accurate and stable cuts.

@stuartjones7903 2 года назад

Excellent channel and I have just come across this as I was researching Japanese saws but that last cut was not your best

@anthonylanger1 4 года назад

Can you explain the difference in the 8:1 and the 6:1 Dove tail Jig? Which one would you recommended for a 1st timer?

@katzmosestools 4 года назад

8:1 is typically for hardwood and 6:1 is typically for softwoods. If you're only going to get one I prefer the 8:1.

@anthonylanger1 4 года назад

@@katzmosestools Thanks for the guidance. Buying one and a saw tonight. Excited to try my 1st dovetail.

@TheHomeMaker1 4 года назад

Hey buddy huge fan I am a newer wood worker started back last summer so almost a year into it and I finally have all my small medium and stationary power tools in my shop set up and working and have started buying hand tools the past few monthes and I’m ready to try some dovetails I see there are 2 types of your magnetic dovetail jig in your shop online do I need the 8:1 or 6:1 what’s the difference what are they for please let me know and I’ll order now thanks

@rootvalue 4 года назад

Any plans on carrying a single-edged flush cut saw?

@barrydewhirst3947 4 года назад

Keep the plastic guards that come with it

@Jped277 3 месяца назад

Can I sharpen this saw?

@stephenballoch8660 4 года назад

Sir can I have a job? Woodworking is the most rewarding thing I've ever done. And your channel has probably helped me the most to increase my skill. Thank you

@katzmosestools 4 года назад

You're hired! Thanks bud!

@soledude Год назад

👌👌👌

@pablobartelotte4553 4 года назад

I just visited the link and am very pleased to say there are no tools over $50. I saw several saws I never seen before, I was very impressed with what I saw. Usually you see a saw like these and they are priced over $100. But I think he makes his money off the t-shirts $30 each. I purchase and sell screen t-shirts at local stores near me. I buy blank T-shirts for $2-3 each in bulk (usually high quality). If your paying more than $15-20 for a screened t-shirt, your paying too much. My custom t's sell wholesale to the retailer for $7 and they double to tripple that for retail.

@Donegaldan 4 года назад

Jonathan, you went to a lot of trouble to practically demonstrate what you wanted to teach. Greatly appreciated. The saw is pronounced Ree-Yo-Ba.

@Riffme81 3 года назад

Whats the depth of cut with these saws

@assai74 4 года назад

4:46 ...perfectly square - whups! 🤣

@assai74 4 года назад

My first heart in the history of youtube. Keep you in there

@danielpittman889 4 года назад

Thought you were gonna snort some sawdust for a minute there!

@jeffmansfield914 4 года назад

Great info! I really appreciate what you do for the woodworking community, even if you started to sound a bit like Billy Mays there at the end. 😜

@martinhawrylkiewicz2025 2 месяца назад

Can anyone tell me the Dozuki 9.5" saw That is featured in this vid...how deep is the cut? I would like to know how wide is it (from the edge of teeth up to the spine) before i buy it. Thanks

@katzmosestools 2 месяца назад

It’s in the product description on our website

@martinhawrylkiewicz2025 2 месяца назад

@@katzmosestools sorry but the info about depth of cut is missing.

@katzmosestools 2 месяца назад

2 7/8” I think

@martinhawrylkiewicz2025 2 месяца назад

@@katzmosestools thank you.

@o0iceblack0o 4 года назад

For how long is the pre sale going ?

@katzmosestools 4 года назад

Through Black Friday if I don't run out. They're selling pretty fast and I am a little worried I under ordered.

@o0iceblack0o 4 года назад

Ok I won’t risk it... order submitted

@xiev6888 4 года назад

We’re do you get your wood from

@someone-gb2ec 3 года назад

From woods

@bobkeller8383 4 года назад

I dont have and never have used a Japanese saw but have been wanting one. What would you recommend for a good all around general purpose saw? I dont plan on doing dove tails. Thank you

@katzmosestools 4 года назад

A ryoba for sure. 2 saws in one

@bobkeller8383 4 года назад

@@katzmosestools thank you sir

@terrysullivan1992 4 года назад

Everytime I see that metal piece sticking out an angle from that front pouch I wonder when he is going to catch the inside of his arm on it and rip a hole.